vacuum blower Articles

  • Steel Degassing With Aerzen Vacuum Blowers

    Applications in the steel industry During the production of high-quality steels Aerzen Vacuum Blowers are used for further processing of the melt, the so-called steel degassing. Vacuum Blowers are used after the so-called “refresh“ of the steel, where oxygen is blasted into the pig iron. During this metallurgic further processing of the melt, the so-called secondary ...

  • LATEST TECHNOLOGY: Smartphone SVE BLOWER & OXIDIZER SYSTEMS with Remote Monitoring

    SOIL-THERM designs and builds SVE Blower and Oxidizer systems for environmental and remediation applications that are full of features and LOW in price. By integrating advanced PLC capabilities into these systems, SOIL-THERM offers our customers a whole new level of capabilities.  The SVE Blower system with or without oxidizer allows changes to flows, blower speeds, alarms, manual ...


    By Soil-Therm Equipment, Inc.

  • Troublesome leaks

    Blowers and Vacuum Pumps employed in evaporator systems have problems with frequent leaks. This includes both the internal and external sealing systems. Beginning with 2016, following numerous tests, CONCES offers all end users of evaporators, new solutions for blowers of various manufactures. A well-sealed Blower and Vacuum Pump guarantees ultimate efficiency  of your sewage treatment ...


    By Conces

  • KS 1000 compact stripper case study - IEG Technologie GmbH

    VOC-contaminated groundwater is treated in a 2-stage low-profile compact vacuum stripper (CVS). A negative pressure blower applies a vacuum to the treatment chamber. In this chamber a 2-stage stripping reactor is located and the stripping air is directed to the upper tray. The groundwater loops around on the upper tray along designate barriers, while the stripping air is being pulled through the ...


    By IEG Technologie GmbH

  • Thermocline-driven desalination: the technology and its potential

    Seawater desalination technology is emerging as freshwater requirements are alarmingly increasing all over the world. Conventional technologies such as reverse osmosis and multistage flash evaporation have their limitations, such as chemical treatment and scaling. Low-Temperature Thermal Desalination (LTTD) is an attractive technology with vast potential. It makes use of the ocean temperature ...


    By Inderscience Publishers

  • Creative Service Solutions - Case Study

    A paper mill in Finland suffered the complete failure of a large four-stage vacuum blower. Creative problem solving resulted in a repair time of only seven days. The maintenance team built a functional blower by using parts from three outdated machines. The combined efforts of Sulzer and of the paper mill’s own engineers made it possible. The paper industry has to cope with a ...


    By Sulzer

  • Case study - Petroleum remediation systems

    Overview A major oil company was looking for a way to stay ahead of EPA regulations for soil vapor extraction of BTEX and the subsequent treatment of these gases. They were looking for one company that could offer competitive pricing, local support service, and the application expertise to provide 50 remediation units throughout the ...

  • Multifunctional Well Implemented for In Situ Remediation of Hydrocarbon Contaminations in Soil and Groundwater

    Abstract A recently developed Multifunctional Well has been implemented for the remediation of subsurface contamination caused by hydrocarbon spills. Four different remediation processes can be operated within the same well. At optimal efficiency of each remediation process, successive treatment of the capillary fringes, the vadose zone, and the aquifer can be accomplished. Each treatment ...


  • TB 56: Power plant in thailand uses liqui-cel® membrane contactors to remove co2 from water

    A major power plant in Thailand is using Liqui-Cel® Membrane Contactors to remove carbon dioxide from a DI water system. The system is an expansion project and will be used to feed a high pressure boiler. Liqui-Cel Contactors are being used to lower the CO2 inlet into an Ionpure EDI system. Carbon dioxide adds an ionic load to the EDI system, which can reduce the performance of the system. ...

  • Sweeter smelling solution at grampian prepared meats

    Chicken blood was previously drawn from the collection sump in the production area, via a vacuum pump, to fill a pressure vessel. This blood was then transferred into a 30 tonne holding tank by a blower and the necessaryventing of this system to atmosphere gave rise to the odour and required addressing ahead of the 2007 cut-offdate for compliance with the latest regulations. Mono’s solution was ...

  • Wind-driven SVE system extracts VOCs from landfill

    An innovative soil vapor extraction (SVE) system has operated at the former Ferdula Landfill site in Frankfort, NY, for the past 10 years. The system relies on wind-driven vacuum processes rather than electrically powered air blowers to extract volatile organic compounds (VOCs) from the landfill. After a two-year trial beginning in 1998, the New York State Department of Environmental Conservation ...

  • Soil Vapor Extraction (In Situ)

    Introduction Soil vapor extraction (SVE) is an in situ unsaturated (vadose) zone soil remediation technology in which a vacuum is applied to the soil to induce the controlled flow of air and remove volatile and some semivolatile contaminants from the soil. The gas leaving the soil may be treated to recover or destroy the contaminants, depending on local and state air discharge regulations. ...

  • Improving bioremediation

    Sustainability is becoming a benchmark for the quality of companies who offer remediation solutions, the technologies that they develop and offer commercially, as well as the entire projects where they are used. It is, in essence, not something that can be simply ignored in the months and years ahead if standards are to continue to improve, says Tom Hayes of Ecologia. The sustainability ...


    By Newzeye Ltd

  • Insitu mixing of dry and slurried reagents in soil and sludge using shallow soil mixing

    Introduction Recent implementation for the Federal Hazardous Waste Land Disposal Restrictions (LDR) to RCRA and USEPA's willingness to approve on-site treatment and/or containment has allowed in situ treatment methods to become viable options in site remediation. Shallow Soil Mixing (SSM) is one of several in situ mixing techniques now commercially available for use in on-site treatment of ...


    By Geo-Con, Inc.

  • Art or Science?

    The choice between dilute phase pneumatic conveying and flexible screw conveying is not always clear Everyone has rules of thumb when it comes to choosing a conveying system — rules based on bulk material characteristics, required flow rates and distances, source and destination, plant configuration, and other variables. But those with experience in all types of systems will tell ...


    By Flexicon Corporation

  • Companies offering flood damage restoration services in Melbourne

    Almost every type of natural calamity is inevitable definitely where the not-so –fortunate people get impacted to extreme extents. Flood is one such calamity which can prove to be quite disastrous. Sometimes, there’re chances even though partial chances that your losses would be recovered. However, for the people affected, flood damage, restoration becomes of utmost ...


    By Masters Water Damage

  • ABUTEC Navigates to U.S. Coast Guard Certification - Case Study

    ABUTEC has carved a niche in the midstream oil & gas sector by providing turnkey Marine Vapor Control System (MVCS) solutions. But what if your site needs a custom solution? ABUTEC recently created a custom solution for Targa Resources to aid in flaring during the barge offloading process. Targa Resources, located in Channelview, Texas, is a provider of midstream services to North America. ...


    By ABUTEC LLC

  • Composting

    Introduction Composting is a controlled biological process by which organic contaminants (e.g., PAHs) are converted by microorganisms (under aerobic and anaerobic conditions) to innocuous, stabilized byproducts. Typically, thermophilic conditions (54 to 65 °C) must be maintained to properly compost soil contaminated with hazardous organic contaminants. The increased temperatures result from heat ...

  • Common Treatment Technologies for Nonhalogenated VOCs in Air Emissions/Off-Gases

    Three technologies that are most commonly used to treat nonhalogenated VOCs in air emissions/off-gases are carbon adsorption, catalytic oxidation, and thermal oxidation. Carbon adsorption is a remediation technology in which pollutants are removed from air by physical adsorption onto the carbon grain. Carbon is 'activated' for this purpose by processing the carbon to create porous particles with ...

  • Common Treatment Technologies for Halogenated VOCs in Air Emissions/ Off-Gases

    Three technologies that are most commonly used to treat halogenated VOCs in air emissions/off-gases are carbon adsorption, catalytic oxidation, and thermal oxidation. Carbon adsorption is a remediation technology in which pollutants are removed from air by physical adsorption onto the carbon grain. Carbon is 'activated' for this purpose by processing the carbon to create porous particles with a ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you