vacuum dryer Articles

  • VacuDry Indirect heated vacuum thermal Desorption by econ industries - case study

    With the VacuDry8 technology the energy-efficient treatment of hazardous and industrial waste as well as contaminated soil, oil sludge and secondary raw material is realized. Controlled vacuum and heat are used to separate minerals from oil, solvents, mercury and other hazardous substances.    At the core of the econ VacuDry8 process is a specially designed dryer chamber which ...


    By econ industries GmbH

  • What is the difference between Rotary Vane and Diaphragm vacuum pumps?

    Most laboratories will have a vacuum pump. They are widely used across labs of all disciplines for a range of tasks from basic filtrations or evacuating a desiccator right up to use with large equipment such as vacuum ovens or rotary evaporators. The two most common types are rotary vane or diaphragm pumps – but ...


    By Camlab Limited

  • AVA - the fast way of API drying - Case Study

    AVA dryers for pharmaceutical substances meet and exceed International standards GMP and FDA, also for HP APIs. AVA dryers are customized units, made of high-quality steel (e.g. hastelloy). They can be equipped with fully automatic containment solutions or manual glove boxes to ensure maximum of industrial safety measures. Clamped flange joints and CIP/WIP nozzles make AVA dryers extremely easy ...


    By AVA - Huep GmbH u. Co. KG

  • A novel atmospheric freeze-drying system using a vortex tube and multimode heat supply

    This article presents results of an experimental study of (AFD); atmospheric freeze-drying which uses a vortex tube to produce low temperature air, as an alternative to vacuum freeze-drying (VFD). An experimental setup was designed and built to permit simultaneous application of convection, conduction and radiation heat input to the drying material without heating it above the freezing point of ...


    By Inderscience Publishers

  • Vaccu.Lan for Green

    You're building a 'green' science building, and some of your laboratories require vacuum support. How do you provide vacuum for those labs? You can't use an oil-sealed rotary vane vacuum pumps in the labs. The oil mist would contaminate the laboratory air, and the noise pollution makes the working environment unpleasant. The pump oil would quickly be contaminated by biological and chemical ...

  • Bioactive compounds from various plants

    Customer: Lifetree Biotech Co. Ltd, Korea Lifetree is a bio-venture company founded with the goal of researching and developing highly effective, yet safe natural products, functional foods and neutraceuticals from Korean native bo-tanicals. Lifetree has purifi ed an active compound, HD-1, from the tree Hovenia Dulcis, which is a well known tree in connection with liver health. Two major ...


    By BÜCHI Labortechnik AG

  • Remediation of refinery waste, oil sludge from lagoons and contaminated soils - case study

    The first VacuDry plant installed at a refinery is designed to treat waste which has accumulated over the last decades, as well as waste that will be generated inside the refinery in the future. The semi-mobile system has a capacity of 1.5 to 2 tons per hour. The plant is designed for maximum flexibility and can treat different types of refinery wastes ranging from dry soil to wet centrifuge ...


    By econ industries GmbH

  • Solar Panels

    The Customer The Company is a worldwide developer, manufacturer, and distributor of solar electricity panels. The Process The Company uses a multiple zone conventional printing dryer for thin-film deposition onto solar cells. A special foil substrate is passed through rollers that transfer a proprietary ink formulation and epoxy adhesive ...

  • Drilling oil recovery from drill cuttings case study

    By econ industries VacuDry indirect heated thermal desorption Drill cuttings are an increasing waste stream worldwide, econ industries addressed the challenge by developing a process that cleans the waste and at the same time recovers valuable drilling oil. The VacuDry plant started the successful processing of drill cuttings in autumn 2013. Our client, a medium-sized recycling company, was new ...


    By econ industries GmbH

  • Remediation of mercury contaminated industrial site for future expansion - case study

    70,000 tons of mercury contaminated soil and building rubble have to be cleaned in an industrial facility in the south of France until 2013. For the realization of this remediation work, an econ industries VacuDry® 12,000 has been in operation since early 2011. After the treatment the mercury free soils can be re-used on-site as building material. A similar but smaller econ industries ...


    By econ industries GmbH

  • 1st Tech applications range case study

    Paper industry: roller, air compressor, after cooler, calender bowl, chemical scrubber, closed cooling system, condenser, cooling tower, gas cooler, heat exchanger, intercooler, filtrate tank, filtrate pipe, vacuum filter, vacuum pump, slush pump, lime pump, evaporimeter, digester, scrubber, flow box, squeezer, indirect cooler, absorption plant, gas steam room, steam ...


    By Mibo International Corp.

  • Distillation Process Can Yield Zero Liquid Discharge System

    Many industrial applications produce liquid waste as a by-product of their process. As environmental regulations governing the disposal of industrial wastewater become more stringent, it's imperative that innovative wastewater treatment solutions are used to treat this waste and minimize the environmental impact of disposal. While numerous technologies exist to treat industrial wastewater, Zero ...


    By Samsco Corporation

  • Oil and metal recovery from mill scale and grinding swarf for the metal industry - case study

    A combination of rising prices for resources and the improvement in technology make treatment of mill scale and grinding swarf an extremely environmentally friendly and economical solution. The first VacuDry® plant for the recovery of oil solvents and metals from sludges began operating in autumn 2012. Our client is a medium-sized company operating in the field of waste recycling and ...


    By econ industries GmbH

  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • Coal Powder Plant

     Coal Crushing Plant,Coal Powder Plant,Coal Grinding Process The feeders load the ROM coal onto a reclaim ...


  • Centralised treatment of oil sludge and other industrial waste - case study

    Centralised treatment of various sources of industrial waste has been established in many European countries over the last decade. Many facilities are still equipped with non state of the art technology and therefore cannot fulfil the broad field of applications with regard to industrial waste remediation, econ's international client decided to be one step ahead and erected a new econ industries ...


    By econ industries GmbH

  • Remediation of hydrocarbon contaminants from oil lagoons and refinery waste - case study

    In 2007 econ delivered an indirectly heated thermal desorption plant to a client in Kuwait. The plant is de-signed to treat various types of waste with hydrocarbon contaminant content. In particular refinery waste, oil lagoons and down hole drilling waste. The aim is to recover the waste hydrocarbons from the soil/sand and remediate the lagoons of their contaminants.  Due to the natural ...


    By econ industries GmbH

  • Mercury recovery from industrial waste and toxic residues of natural gas drilling

    econ's client in the east of Germany is one of the few specialised companies in Europe for the treatment of mercury contaminated waste. Typical input material for this type of treatment is sludge from the natural gas industry or other residues from chemical processes, i.e. contaminated filter cake from waste water treat-ment. Among their most important clients are Shell, ExxonMobil, Wintershall ...


    By econ industries GmbH

  • Centralised treatment of oil sludge and other industrial waste

    Centralised treatment of various sources of industrial waste has been established in many European countries over the last decade. Many facilities are still equipped with non state of the art technology and therefore cannot fulfil the broad field of applications with regard to industrial waste remediation. econ's international client decided to be one step ahead and erected a new econ industries ...


    By econ industries GmbH

  • KOSUN Decanting Centrifuges Sent to South Asia

    Recently, three KOSUN DC355 decanting centrifuges  ordered by a famous South Asian oil company have successfully arrived at Shenzhen Port for shipment. This is the second time for the customer to buy solids ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you