vacuum dust collector Articles

  • Researchers are Advancing Science Using Micro Pulse LiDAR Technology

    There are so many examples of interesting research using Micro Pulse LiDAR (MPL) technology it is difficult to decide on my favorites; however, I have chosen to highlight the following two papers because these applications for the MPL and MiniMPL address problems that are very important to global health. ...

  • Micro Pulse Lidar: Perfect Tool for Atmospheric Research

    Micro pulse style lidars are active remote sensing tools proven to be highly useful in atmospheric research. This style of backscatter lidar has been around for decades; however, incremental improvements in photon counting, sensitivity, polarization, optical filters, coatings, and precision machining of each element support increasingly accurate analysis. Each iteration of the ...

  • Multiple Instruments Work Together for a Better View of Air Quality

    Accurately identifying and quantifying particulate matter (PM) in the atmosphere is key to determining air quality. Researchers are particularly interested in PM that have a diameter of less than 2.5 micrometers because they are believed to contribute to heart and lung disease in humans and animals. These tiny particles are invisible to the naked eye and originate from power plants, fires, and ...

  • Advantages of cleaning without a venturi in baghouse collectors

    ABSTRACT: Background The cleaning cycle is the most important part of the dust collector because it controls efficiency and media life. In order to clean a row of bags in a reverse pulse jet baghouse first the flow of filtered air must be momentarily stopped and then back flushed or “induce” air to knock the dust cake off the outside of the filter media. A venturi at the top of the ...


    By Scientific Dust Collectors

  • Ineffective cleaning in generic baghouses

    ABSTRACT: Background In a typical “generic” baghouse application, the cleaning is accomplished by back-flushing the filter with compressed air that travels through an orifice hole in a purge tube (blow pipe) and through a venturi. A typical generic cleaning system allows dust to be filtered at an air-to-cloth ratio of 5:1. That means for every 5 CFM of airflow, there is 1 square foot ...


    By Scientific Dust Collectors

  • Filter Your Air with Cartridge Dust Collector

    A cartridge dust collector uses filtering cartridges and is a self-cleaning dust collector. The cartridges it uses are made from synthetic fibers and cellulose that is treated chemically. This ensures the particles are efficiently collected without forming an excessive pressure drop in the system. Structure A cartridge dust collector uses an air-jet cleaning structure to preserve ...


    By ProVent, LLC

  • Effective Industrial Dust Collector Strategies

    Finding the correct type of industrial dust collector for the grinding section is a must for opposing an injection mold creating shop. This is vital for health and welfare of workers and for the performance of grinding machines. Dusts produced from electrodes are graphite and copperand during the milling or grinding operation, these needs to be filtered away from the atmosphere with an ...


    By ProVent, LLC

  • Let’s Talk About the Design of Cartridge Dust Collectors

    When it comes to choosing a cartridge filter, the choice usually depends on the application. Systems with finer particles require a cartridge filter, and these come in the choice of two. Surface and Depth-Type Filters A surface filteris ideal when filtering remains of similar-sized particles. Depth-type filters capture pollutants and particles ...


    By ProVent, LLC

  • Manufacturing facility cleaning case study

    The Challenge A large Industrial manufacturing facility found that their process used to perform the necessary tasks was creating an undesirable accumulation of heavy metals dust throughout the entire plant. Not only was this a potential health risk to the plant workers, there was a structural and safety problem because the dust could spark and cause a fire or explosion. ...


    By Enviro-Vac Corp.

  • What You Need to Know About Cyclone Dust Collectors

    Cyclone dust collectors are brilliant cleaning devices and once you have decided to use one, you must understand the job it does. A cyclone dust collector is different from other dust collectors, which is the first thing so you don’t get confused. Dust collectors remove dust particles as well as harmful pollutants flowing in the work environment. However, cyclone dust collectors are more ...


    By ProVent, LLC

  • Asbestos contaminated soil case study

    An active gypsum manufacturing facility discovered they had a large area of gypsum waste containing asbestos mixed with soil at the back of their property. The waste had accumulated over the years before the dangers of asbestos were known and now required remediation due to communication wires buried in the waste. Excavators could not be used due to the presence of the communication wires that ...


    By Enviro-Vac Corp.

  • How to Avoid Undersizing a Dust Collection System

    Baghouse manufacturers often recommend undersized systems to undercut others for your business. How can you avoid buying a undersized baghouse that won't work?  Dust collector OEMs constantly try to come in with bids lower than competitors. In an attempt to do so, some baghouse manufacturers offer undersized systems. One recent experince highlights the dangers of allowing manufacturers' ...


    By Baghouse.com

  • Membranes and theoretical modelling of liquid–gas membrane separation for aromatic compounds removal from water: a review

    Liquid–gas membrane separation techniques - namely, vacuum membrane distillation, membrane air–stripping/sweeping and pervaporation - are non–equilibrium membrane separation processes emerging for the removal of aromatic compounds from industrial wastewater and polluted ground waters. This review focuses on polymeric hydrophobic membranes which are commonly employed in the liquid–gas membrane ...


    By Inderscience Publishers

  • Dixie Cut Stone & Marble chooses Whirl Wet High Efficiency Wet Dust Collector with Low Maintenance and Operating Costs.

    Dixie Cut Stone & Marble finishes Indiana limestone for the dimensional stone industry. Dixie management wanted 'best available' dust control technology to maximize both ergonomic and housekeeping benefits. Tri-Mer supplied two Whirl/Wet units with top-mounted blowers. Collected material is discharged manually after settling. The system operates with minimal water consumption and consumes ...

  • Hester Industries: Whirl / Wet Combines High Efficiency Wet Dust Collection with Low Maintenance and Operating Costs.

    Chicken processor Hester Industries bought a polypro Whirl/Wet to serve the breading operation at the company’s Moorefield, WV plant. The breading generated fugitive dust; the bag collectors originally installed to collect the sticky dust were not adequate to the task. The hygroscopic nature of the dust made the Whirl / Wet dust collector a cost-effective choice. Excess spice/flour dust is ...

  • Plastics case study - Schmalbach-Lubeca

    Schmalbach-Lubeca operates 24 hours a day, 7 days a week, manufacturing millions of plastic bottles each day for the beverage industry. With a total of 63 plants worldwide, 17 locations are within the United States. The Blythewood, South Carolina location was using long radius elbows to convey PET Poly Pellets from the rail car to the silo, and from the silo to the molding operation. "Streamers" ...


    By HammerTek Corporation

  • Seawater desalination with solar-energy-integrated vacuum membrane distillation system

    This study designed and tested a novel type of solar-energy-integrated vacuum membrane distillation (VMD) system for seawater desalination under actual environmental conditions in Wuhan, China. The system consists of eight parts: a seawater tank, solar collector, solar cooker, inclined VMD evaporator, circulating water vacuum pump, heat exchanger, fresh water tank, and brine tank. Natural ...


    By IWA Publishing

  • Horween Leather: Whirl / Wet Dust Collector Combines a High Efficiency Wet Dust Collection with Low Maintenance and Operating Costs.

    For leather fines and other lightweight, porous materials, dry collection has been thought to be preferable to wet because of the material’s buoyancy. Horween Leather Company challenged that assumption. Originally, two baghouse systems collected particulate, but problems arose with each baghouse. First, cold winter dryness caused high levels of static electricity. Resultant sparks in the ducts ...

  • Improving the cleaning cycle in baghouse collectors

    ABSTRACT: Background The reverse pulse jet baghouse has been around for over 45 years and the cleaning cycle has not changed very much since that time. The cleaning cycle is the most important part of the dust collector because it controls efficiency and media life. In a generic baghouse, the cleaning system is comprised of a blowpipe that is located typically approximately three inches above ...


    By Scientific Dust Collectors

  • GM-Delphi: Whirl / Wet Combines High Efficiency Wet Dust Collection with Low Maintenance and Operating Costs

    Tri-Mer® dust collection technology has once again been selected by GM-Delphi. Four units were selected as replacements for dry collectors. Each unit serves four grinding (or shot blasting) stations. Capacities range from 425 to 52,500 cubic ft./minute. The units will accommodate very heavy loadings under continuous use, and allow regular maintenance without interrupting production. Equally ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you