valve manufacturer Articles

  • Closed Circuit Coolers: Design with winter in mind

    When outside temperatures fall below freezing, water inevitably forms into ice. Open cooling towers can be susceptible to freezing due to their inherent nature of operation. As a result, ice formation becomes a subject of management, not elimination. Fortunately, there are alternative solutions. Closed circuit coolers are used for a multitude of niche applications, but are ideal for evaporative ...


    By Evapco Inc.

  • The Manufacturing Process of Sanitary Quick Installation Butterfly Valve

    1. The rubber seals and valve plates of sanitary quick installation butterfly valve are imported parts to ensure the of performance and service life butterfly valve. 2. It uses a high-precision CNC lathe finishing valve which ensures a reliable compatibility of interchangeability, eliminating the need ...


    By Adamant Valves

  • Automotive parts manufacturer - Eaton US engine valve case study

    Scope US Engine Valve in SC had 16 small washing systems that were used to wash parts after machining with straight oil as the metalworking lubricant. These wash tanks were dumped and recharged weekly and the oil concentration in the washers climbed between cycles to 5% before dumping at the end of the week. During this cycle, the part tolerance measuring equipment could be adversely ...


    By Separation Dynamics

  • Beverage Manufacturer to Cut Disposal Cost

    THE PROBLEM A Pennsylvania general contractor with much experience within the beverage industry, saw that water utilization at a major food and beverage manufacturer’s facilities would benefit from an integrated approach to minimizing water consumption, while simultaneously optimizing boiler and cooling water treatment issues.  By adopting such an approach, the contractor planned to offer ...


    By Samsco Corporation

  • Client - Automotive Part Casting Manufacturer, Kentucky, USA

    As part of its energy review this global multi-national sought a means by which it could reduce its aluminium furnace running costs. After a period of technical consultation an Econotherm® GA 330 Gas to Air smooth pipe heat exchanger was selected for the installation. The original business case was approved on the basis of a $100K per annum saving against a total estimated project costs of ...


    By Econotherm UK Ltd

  • Petrochemicals Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Aerospace - Leading Aerospace manufacturing firm - case study

    Application The company designs and builds flight controls for aircraft and launch vehicles. Their product line includes thrust vector and steering controls for space vehicles as well as thruster valves, regulators and integrated manifolds for satellite propulsion. Manufacturing of most of these products requires either military spec plating or anodizing to ensure protection from extreme ...


  • Healthy Control Valves

    A simple maintenance routine can help ensure trouble-free valve operation. Whether the control valve in your system is the first one that has required maintenance or if you are experienced with maintaining multiple valves in your system, some simple guidelines can help keep them operating at optimal performance. Physically checking all valves at least every 12 weeks is important, assuming that ...


    By Singer Valve Inc.

  • Checking rotary valve clearances

    Rotary valves are precisely machined to accommodate very tight internal clearances. In a smaller standard valve there should be a .003” – .005” gap between the tips and ends of the rotor and the housing / headplate. However, the clearances on many valves are customized to meet the needs of a specific application. For example, in applications with temperature greater than ...


    By Wm. W. Meyer & Sons, Inc.

  • Industrial Peristaltic Pumps reduce the cost of ownership for paper and packaging manufacturer

    Challenge A leading paper and packaging manufacturer in Australia was using Air-Operated Double Diaphragm (AODD) pumps to deliver 4-colour ink to its printers. The on-site AODD pumps were using considerable amounts of compressed air and required constant maintenance due to the wearable parts (seals and valves). This was resulting in unacceptable long downtimes and high cost: for repair and ...

  • Feed Manufacturer Installs High Efficiency Recuperative Oxidizer Due to Production Increase

    Operating Issue A global animal feed researcher and producer increased their capacity at their Midwest facility, thus requiring air pollution control technology that addressed their new process. Pollution Systems was sought to provide equipment to effectively reduce odors in 40,000 SCFM of VOC-laden process air, generated by the production of animal supplements. Additional objectives, ...


    By Pollution Systems

  • Safety Valve / Change-Over Valve Combination ( Refrigerant Applications)

    The Seetru range of Safety Valves for refrigeration applications are designed to meet the needs of the refrigeration industry, offering safety valve technology for compressor manufacturers, industrial refrigeration, commercial refrigeration, ice making systems and air conditioning.  Used if a plant shutdown is impossible or undesirable, change-over ...


    By Seetru Limited

  • APEX – Peak performance from the market leading hose pump manufacturer

    Decades of experience and knowledge have combined with closely scrutinised customer feedback to deliver APEX, three new hose pumps from Bredel, part of the Watson-Marlow Fluid Technology Group. Designed to suit all dosing, metering and transfer applications from 2.8 to 1,200 litre/hour across a broad range of applications, the new APEX pumps are now the first choice for processing plants the ...

  • Valve innovation drives ion technology

    A NOVEL multiport distribution valve is at the heart of a new ion exchange system that reduces plant operating costs and capital expenditure by improving liquid–resin contact efficiency. The patented IONEX process can be used for resource recovery and purification in a wide range of industries, as well as water demineralization. Ion exchange systems are already used extensively for water ...


    By PuriTech Ltd

  • Water recovery system reduces soft drink manufacturers water waste by 35%

    The filtration and water treatment specialist Puresep provide leading soft drinks manufacturer with a state of the art system to reduce their water usage Puresep were contacted to look at ways the soft drinks manufacturer could reduce the amount of rinse water sent to drain – in order to help them achieve their water reduction targets Following an onsite review of the current rinse ...


    By Water Active Ltd

  • Characters of Soft or Hard Seal Valves

    Soft and hard seal are able to complement each other. The seal ability of soft one is better than hard one, however, hard seal now can also meet some requirements. Soft seal has better sealing ability, but can easily age, wear and has a short lifespan. Hard seal can be used longer, but has poorer sealing ability. Characters of Soft Seal Valves Soft seal: one side of the seal is ...

  • Xinhai Statement of the Implement Valve Standards

    Following are the design, manufacture and inspection standards of our company.   Check Valve: API 6D 24th Specification for Pipeline and Piping valves BS 1868-1975(R1990) Specification for Check Valves (Flanged and Butt-welding Ends) for the Petroleum, Petrochemical and Allied Industries EN14341-2006 Industrial valves —Steel Check Valves ...

  • Basic operation of a Cycle Stop Valve

    Automatic pump control methods are described as a pump system that automatically delivers water when a tap is opened, and automatically stops the pump after all taps are closed. A variety of pump control methods have been used in the past. The Cycle Stop Valve replaces: Variable Frequency Drives (VFD’s) or “Constant Pressure Pumps”. Large pressure ...


    By Cycle Stop Valves, Inc.

  • Rotary valve maintenance: preventing operating problems

    Preventing operating problems by maintaining your rotary airlock valve Even though a rotary airlock valve is a relatively simple device, you have to maintain it properly to ensure it performs dependably. Proper maintenance will provide twin long-term dividends: better valve performance and smooth conveying system operation. First, know your valve inside and out. Maintenance ...


    By Wm. W. Meyer & Sons, Inc.

  • American Standard Sanitary Check Valve Technical Parameters

    1. Bolt connection Body bonnet connection executive standard: ANSI B 1.1 Nut manufacturing executive standard: ANSI B 18.2.2 2 valve cover The bonnet material is the same as ...


    By Adamant Valves

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you