vapor extraction monitoring Articles

  • Soil Vapor Extraction (Ex Situ)

    Introduction: Ex situ soil vapor extraction (SVE) is a full-scale technology in which soil is excavated and placed over a network of aboveground piping to which a vacuum is applied to encourage volatilization of organics. Soil piles are generally covered with a geomembrane to prevent volatile emissions and to prevent the soil from becoming saturated by precipitation. The process includes a ...

  • Significant Benefits of Augmenting an Extractive Remedial System with RegenOx™

    Recently, in the United Kingdom, a combined strategy was implemented to synergistically increase the treatment rate and efficiency of subsurface remediation while also reaching an inflexible remedial deadline cost-effectively. Central to this was the novel exploitation of a feature of RegenOx that was initially designed for an alternative purpose. The remedial strategy is now being widely used on ...


    By REGENESIS

  • Wind-driven SVE system extracts VOCs from landfill

    An innovative soil vapor extraction (SVE) system has operated at the former Ferdula Landfill site in Frankfort, NY, for the past 10 years. The system relies on wind-driven vacuum processes rather than electrically powered air blowers to extract volatile organic compounds (VOCs) from the landfill. After a two-year trial beginning in 1998, the New York State Department of Environmental Conservation ...

  • Taking Fossil Fuels to the Next Level - Standards Underpin Extraction, Processing and Distribution

    To the average person, the oil and gas industry may appear simple — a matter of literally tapping into a natural resource and distributing it to customers. Of course the matter of extraction is rarely simple, and in the case of emergent hydraulic fracturing technology, it is particularly complex and capital-intensive. In fact, the world of petroleum and natural gas extraction, distribution ...


    By ASTM International

  • Program developed to ensure long-term O&M and performance of vapor intrusion mitigation

    EPA Region 7 has developed a comprehensive VI program to address the installation and long-term operation and maintenance (O&M) of VI mitigation systems, as well as assessment sampling for future systems, in homes near the Chemical Commodities, Inc. Superfund site (CCI). Region 7's VI Program Implementation Manual, which describes decision processes and procedures as well as roles and ...

  • Air Monitoring for the Gulf Oil Spill

    Ambient air monitoring is a priority in the ongoing efforts to contain and manage the oil spill from the Deepwater Horizon in the Gulf of Mexico. The following provides information about the kinds of airborne contaminants that are currently being monitored in the Gulf, how they are collected and how they are analyzed. For a given project, a suitable sampling plan – developed by ...


  • Mississauga Case Study (In Situ Gas Thermal Remediation (GTR™))

    In Situ Thermal Desorption in conjunction with soil vapor extraction was used to remove volatile organic compounds which contaminated the groundwater and saturated soil areas of a former metal fabricating facility in Ontario, Canada. The site had VOCs detected above the Canadian water standard in various monitoring well locations.  The remediation goal was achieved in 84 days and saw a 98% ...


    By GEO Inc

  • LNAPL remediation using electrical resistance heating

    Abstract An Electrical Resistance Heating (ERH) pilot test was conducted in the fall of 1998 to determine the effectiveness of using ERH in combination with soil vapor extraction (SVE) for the remediation of benzene and light nonaqueous-phase liquids (LNAPL) at an island location on a river in the Midwest. Hydrocarbon-stained soils were discovered on an island in Ohio in May 1993 during the ...


    By TRS Group, Inc.

  • First State-funded cleanup using electrical resistivity heating technology

    The Remediation and Redevelopment Division (RRD) completed remediation at a former dry cleaning facility in the city of Owosso using electrical resistivity heating (ERH) technology. Electrical resistivity heating is an in­situ electrical heating technology that uses electricity and applies it into the ground through electrodes. The resistance of the electricity traveling through the ground ...


    By TRS Group, Inc.

  • Air emissions impact measurements at a perchloroethene remediation site

    As part of an U.S. EPA time critical removal action, an air monitoring system was established to measure real-time impacts of perchloroethene (PCE) on the surrounding areas. The soils and groundwater beneath the site (located in West Fargo, North Dakota) were treated using in situ heating of soil and groundwater, with the produced vapors collected using conventional vapor extraction. In order ...


    By VOC Technologies

  • Chloroflourocarbon (CFC) remediation case study

    Project Description The Site location was an industrial facility located in the greater South Los Angeles region that manufactured chemicals for local petrochemical and other industrial operations from 1919 through late 1990’s. Refrigerants were initially produced in 1964 including chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs) such as trichlorofluoromethane (R-11), ...

  • Common Treatment Technologies for Fuels in Ground Water, Surface Water, and Leachate

    It may be necessary to know other subsurface information to remediate fuels in ground water. Treatability testing to characterize contaminant biodegradability and nutrient content may be needed for any biodegradation technology. A subsurface geologic characterization would be particularly important to characterize the migration of NAPLs. Recovery tests are usually necessary to design a ...

  • MPPE for Resins monomer containing Wastewater BTEX removal 99.99 %

    The Surface Coatings Resins Business Unit of Akzo Nobel in Louisville, KY, has chosen the Macro Porous Polymer - Extraction technology for treating process wastewater. The MPPE unit with a capacity of 20 gpm removes xylene and ethyl benzene from 200 ppm to less than 20 ppb. The new system assures compliance with local discharge regulations, while improving economy, reliability, and flexibility in ...

  • Cape Canaveral, Florida - ERH Remediation of TCE DNAPL - Case Study

    Early technology demonstration of ERH used to remediate TCE DNAPL The Interagency DNAPL Consortium (IDC) representing the U.S. EPA, NASA, DoE, DoD, and U.S. Air Force conceived a demonstration to test three technologies for DNAPL remediation. The Technical Advisory Group (TAG), consisting of nationally known experts in the field of DNAPL remediation, conducted the technology ...


    By TRS Group, Inc.

  • PetroSense hydrocarbon sensors and their applications

    The increasing concern about hydrocarbon contamination of process water and produced water has created an increasing need for in-situ, real time, and accurate low cost instrumentation that can provide rapid detection and easily usable in the field. PetroSense sensors [1,2] represents “best in breed” technology for the detection of total petroleum hydrocarbons (TPH). PetroSense sensors ...


    By PetroSense, Inc

  • Determining trace amounts of contaminants in water

    Introduction Pesticides, polychlorinated biphenyls (PCBs), and pharmaceuticals are a worldwide contamination problem. Several major US water bodies, such as the Hudson River, St. Lawrence River, Fox River and the Great Lakes have been contaminated with PCBs from industries discharging into these water bodies for decades. For example, from approximately 1947 to 1977, the General Electric ...


    By Horizon Technology, Inc.

  • Farm site BTEX closure achieved within one year

    Soil and groundwater at the former Feley Farms Site (Michigan, USA) was impacted by gasoline constituents that originated from former USTs. The leaking tanks were removed in 1995; based on the reported petroleum-contaminated water seeping into the excavation hole along the surface of the bedrock during the tank removal process, groundwater monitoring was recommended. The results of the 1996-97 ...


  • Full-scale SVE system operates in tandem with groundwater treatment

    Since 1993, SVE has been implemented using two designs at the TP Industrial, Inc. (TPI) site in Gardena, CA, to treat soil contaminated with chlorinated solvents. The SVE system was modified in 1997 to improve emissions control efficiency by using carbon adsorption units that treat effluent from an air-stripping system for treating site ground water. By the end of 2007, SVE had removed a ...

  • Tacoma, Washington - Well 12A superfund site - Case Study

    Combined Remedies for DNAPL Remediation Project Summary TRS Group, Inc. (TRS) teamed with KEMRON and AMEC, under KEMRON's U.S. Army Corps of Engineers (USAGE) Environmental Remediation Services Multiple Award Task Order Contract (MATOC), to perform electrical resistance heating (ERH) for the remediation of volatile organic compounds (VOCs) in the vadose zone ...


    By TRS Group, Inc.

  • Natural Gas Processing Case Study

    The Customer The Company is an exploration and production company that builds natural gas reserves through the acquisition and development of oil and gas assets across the U.S. They are one of the largest producers of natural gas in the Nation. The Process The Company uses multiple scrubbers to clean out the impurities of the natural gas that they ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you