vibrating level switch Articles

  • Opening the envelope on bearing vibration

    A sophisticated signal processing technique can help to pinpoint bearing failure at an early stage. Chris Hansford, Managing Director at Hansford Sensors, explains. Experienced operators can often tell if a machine is not working properly, on the basis that is does not ‘sound right’. The same principle can be applied – using modern electronics – to identify the exact cause ...


    By Hansford Sensors

  • Shannon Creek Dam Switches to Custom Anti-Cav Control Valve Solution

    Shannon Creek Dam and pump station is the core feature of the Regional Water Supply scheme, a joint venture of the Coffs Harbour City Council and the Clarence Valley Council. With an inundation area is 37 square Km, the reservoir provides 30,000 mega litres of supplementary water supply to The Clarence Valley and Coffs Harbour, located on the Mid North Coast of NSW, Australia. This award-winning ...


    By Singer Valve Inc.

  • Aerzen Offers Plant Monitoring in Real Time

    Delta Real Time MonitoringFollowing extensive field tests, Aerzener Maschinenfabrik can now offer its permanent machine monitoring system “Delta Real Time Monitoring” for the entire delivery programme. With this real time system, which provides a very high level of security, Aerzen is able to satisfy requests from plant operators for high-quality process sequences. If the vibrations ...

  • New chip captures power from multiple sources

    System developed at MIT could combine power harvested from light, heat and vibrations to run monitoring systems. Written by David L. Chandler, MIT News Office.You can read the original new in MIT NewsResearchers at MIT have taken a significant step toward ...

  • Case study - Use of the Nor848A acoustic camera on wind turbines

    The acoustic camera system Nor848 is a powerful tool to investigate noise sources. In realtime you listen to a beamformed audio signal so that you can hear individual sources one by one. Immediately you can identify the strongest over all noise source in a multisource environment, and you can do the same analysis for single frequencies, 1/3 or 1/1 octave bands or any given frequency range. This ...


    By Norsonic AS

  • Konica Minolta - pulse noise source identification

    The Company Konica Minolta is a Japanese holding group and was formed by the integration of Konica Corporation and Minolta Co., Ltd. The group’s product portfolio includes business products and services and industrial products and services. Konica Minolta conducts its operations worldwide. Konica Minolta Business Technologies, Inc. provides equipment for offices and production ...

  • Low-noise Parking at Madrid Airport

    With over 34 million passengers, and handling over 360 000 flights annually, Madrid Barajas Airport, Spain is the fifth largest airport in Europe. It is owned by AENA (Aeropuertos Espaoles y Navegacin Area), who manage over 60 airports throughout Spain and Latin America and handle over 160 million passengers each year. On experiencing a growing number of complaints from the neighbouring ...

  • NFPA 820 Compliance in Wastewater Treatment Plants

    Wastewater treatment plants are essential structures in cities and small communities. Such facilities are closely monitored by several professional institutions, such as OSHA and the NFPA. When it comes to the latter group, guidelines set forth in NFPA 820 are regulations that dictate fire hazards in such facilities. Fire related accidents in wastewater treatment facilities are uncommon. However, ...


    By Larson Electronics LLC

  • Marine AC UPS for Critical Offshore Installations

    Equipment installed in ships or offshore installations typically operate under tough conditions, and any possible equipment failures can have serious cost impact. Despite this, products not really suited for the applications are often chosen based on the initial cost rather than looking at the total cost of ownership. One example is the use of a modular marine AC UPS versus the use of a modified ...


    By Eltek AS

  • Safety and Reliability in High Mast, Light Tower and Area Lighting

    When illuminating a work area, sporting complex, roadway, or any populated area, safety and reliability are of the utmost importance. Without proper illumination, risk for accidents and injury is increased. Power outages, mechanical or equipment failure, or acts of nature can introduce unwanted hazards into the environment. Advances in LED technology have solutions that address these safety ...


    By Larson Electronics LLC

  • How to reduce your risk of ergonomic injuries

    What’s at Stake? One size does not fit all when it comes to work equipment. Whenever a worker has to modify or adjust them self to perform a work task, the “mis”fit causes stress and strain on the body. What’s the Danger? If the task needs to be performed only occasionally, it doesn’t typically become a problem. But the strain ...


    By SafetySmart

  • Case study - How to properly maintain and service your oxidizer

    Your air pollution control system represents a significant investment in not only initial capital but also ongoing maintenance and operation. Routine inspections performed by your staff combined with thorough maintenance plans provided by Anguil Environmental Service Technicians will ensure you get the most from your investment over the entire life of the system. Anguil has almost three decades ...

  • Developing I-deas

    Expanding the Limits   Top of the list for improvements was an easier, spreadsheet-like acquisition setup similar to that used in PULSE Data Recorder Type 7708. This was a major task as the user interface for I-deas was not flexible enough to accommodate a spreadsheet in the main application window. We accepted the challenge and planned to implement the Channel Table Spreadsheet ...

  • Wastewater Treatment in Turbo Mode

    Sulzer turbocompressors type ABS HST are successful in wastewater treatment. Today, 2000 units are installed around the world—for example, in municipal plants like in the city of Sögel, Germany. Here, the turbocompressors not only reduced the operating costs but also helped the plant to cope with load fluctuations. The secret behind this success is an advanced design with proven ...


    By Sulzer Management Ltd

  • Robots reduce test setup by 90%

    Konica Minolta Business Technologies Inc.’s newly established acoustic test laboratory has world-class acoustic features and equipment. Brüel & Kjær contributed with a turnkey PULSE solution including the supply of a microphone positioning robot with computer control for the automatic determination of sound power. Setting up for a test used to take 45 minutes but, as a result ...

  • Case Study: Glastonbury Festival - Noise Monitoring At Glastonbury Festival

    In 1970, an entrance fee of just 1.00 would have permitted you, and about another 1500 'free spirits' to enjoy a weekend of listening to the likes of Quintessence, Marc Bolan and T-Rex, while at the same time savouring the undoubted 'delights' of free raw milk!! Almost three decades later, and at slightly greater expense, you and over 100,000 other people can now enjoy the delights and unique ...

  • Mixed waste composting trends

    It's been about 25 years since vendors started marketing systems to process mixed municipal solid waste via composting in the U.S. Today, there are 13 plants, most fulfilling their niche in the communities they serve - whether managing MSW in high tourism areas, or processing residual organics from materials recovery facilities. Table 1 provides summary data on the 13 facilities. While we did not ...


    By BioCycle Magazine

  • Mixed MSW composting in transition

    WITHOUT a doubt, composting the mixed municipal solid waste stream is a “niche” business. It is an MSW management option that seems to be viable in very specific situations. In some instances, these plants were built to service tourist destinations, often in somewhat rural areas where recycling is difficult and landfills are distant. In several other cases, public agencies built plants to extend ...


    By BioCycle Magazine

  • Weigh batching: the benefits of an automated system

    In many plants that batch-blend bulk products, weigh batching is a manual, time-consuming operation in which ingredients are weighed individually before being charged to a blender or other process vessel. A significant number of such plants could benefit from the installation of an automated weigh batching system. For small as well as large operations, an automated weigh batching system can pay ...


    By Flexicon Corporation

  • Overview of Rotating Disc Electrode (RDE) Optical Emission Spectroscopy for In-Service Oil Analysis

    Introduction The basis of modern oil analysis is the use of optical emission spectroscopy (OES) to measure the ppm (parts per million) levels of wear metals, contaminants and additives in oil samples. Whatever else an oil lab may measure, a multi-elemental analysis is the core of in-service oil analysis. This paper gives an overview of Rotating Disc Electrode Elemental Spectroscopy and its ...


    By Spectro Scientific

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you