vibration meter Articles

  • Vibrating feeders for stockpiling and reclaim

    The expanding applications of vibratory feeders for controlling the flow of bulk materials, and their adaptation for processing requirements, have developed considerable interest in stockpiling and reclaim systems. The general design of these units consists of a material transporting trough, or platform, driven by a vibratory force system. The flexibility and variety of designs is limited only by ...


    By General Kinematics

  • Recording audio with level triggers - Sound Level Meters

    Recording audio from a sound level meter measurement is sometimes necessary. Perhaps you need to listen to identify the source of a noise or for post-processing – or even to play back to a project stakeholder. If a measurement is short, it’s easy enough to record audio for an entire measurement and afterward crop the relevant parts. However, measuring for days, weeks or months, ...

  • GKN aerospace success with portable impedance meter

    The GKN site in Cowes, Isle of Wight, UK, has long experience in the design and manufacture of passive sound insulation systems for air-intakes and by-pass ducts of aircraft engine nacelles. Dr. Armando Vavalle, Technology Development Engineer from GKN reports here on impedance tests conducted with Brüel &Kjær’s Portable Impedance Meter Type 9737 for the development of such ...

  • 50th anniversary of world`s first sound level meter

    Sound Level Meter Celebrates 50th Anniversary 2010 is the year we celebrate the 50th anniversary of Type 2203, the mother of all sound level meters. It was the world’s first precision hand-held and transitorised sound level meter. Produced for 21 years, it sold a record number of 17300 units. With its upgrades Type 2204 (Impulse time constant) and 2209 (peak detector), it accounted for a ...

  • Wastewater Plant Relies on Thermal Flow Meter for Co-Gen Power Gas Blending Process

    The Rahway Valley Sewerage Authority (RVSA), which operates a large wastewater treatment plant in New Jersey, embarked on a green co-generation waste-to-energy project to power a portion of its operations. The plant performs primary, secondary, tertiary and sludge treatment processes in serving over 250,000 residential customers and 3000 industrial and commercial customers in a 40-plus square ...


    By Modern Pumping Today

  • News about JOEST Australia amm

    "Because the trucks have gotten bigger, it means other parts of the processing side have to get bigger. The trucks get bigger, they tip into bigger hoppers, which need bigger feeders. Everything around it is larger." Joest has only been in existence for three years. although Jost equipment had been made in Australia under licence by Jacques for 17 years. Laws said when Jacques was up for sale it ...


  • Former Ordnance Survey – Case Study

    Project Highlights Envirochem carried out environmental perimeter monitoring during the demolition of the former Ordnance survey site in Southampton. Airborne Dust, noise and vibration levels were all monitored using state of the art equipment. Project Description ...

  • Case study - Fred Hartman Bridge - Harris County, Texas

    Service: SoundPrint - Bridges Client: Texas Department of Transportation (TxDOT) Project Date: 2002 Type of Bridge: Fan arranged cable-stayed bridge Length: 4.185 kilometres (2.60 mi) The Fred Hartman Bridge was opened to traffic in 1995 and is one of the largest cable stayed bridges in the United States. The cable stayed bridge portion of the bridge ...


    By Pure Technologies

  • DELUMPER Bulk Bag Unloader (BBU)

    The DELUMPER Bulk Bag Unloader (BBU) is a heavily constructed system designed for convenient unloading materials even if they contain lumps and agglomerates. This unit employs a gyrator to effectively fluidize the materials for dependable discharge from the bags.  Then,  a heavy duty built-in DELUMPER crusher conditions and freshens the product. The result is an effective pre-engineered ...


    By Franklin Miller Inc.

  • Cirrus Research – Noise Measurement Pioneers for Over 45 Years [Video]

    Since 1970, Cirrus’ mission has been to make monitoring noise simple. More than 45 years later, we thought it was time to look back at our story so far and see what we have achieved. Join us by watching our video, which explores our history and what makes us the noise measurement pioneers that we are today. Cirrus Research ...


    By Cirrus Research plc

  • Brüel & Kjær’s radiation-resistant accelerometers

    Carrying out vibration measurements in harsh industrial environments is much easier for engineers with Brüel & Kjær’s new Type 8347-C Accelerometer. The Type 8347-C accelerometer can withstand temperatures ranging from -196°C (-321°F) to +482°C (+900°F) and has high resistance to radiation. The shear design ensures the accelerometer  superior thermal ...

  • Helping Volvo maximise uptime

    With the many challenges facing the automobile industry, such as shortened development times, Volvo is increasingly moving its Noise, Vibration and Harshness (NVH) development into computer simulation and modelling, with less traditional prototyping. A well-established customer of Brüel & Kjær, Volvo benefits greatly from the value added to their systems in terms of the minimised ...

  • New developments of vibratory feeders for large bulk material reclaim systems

    Summary The efficient economical storage, movement, control and blending of large tonnages at coal handling installations such as mines, power plants and port facilities require new and improved designs of vibratory equipment. Environmental and investment impact as well as operational advantages must be considered in the development of any new reclaim system. ...


    By General Kinematics

  • Waste management planning in the Maldives

    The island paradise of the Maldives attracts many tourists every year, but more people means more waste and a greater impact on the environment. Sweco has therefore been chosen by the Maldivan Ministry of Environment to assist in finding a good solution for management of waste on the islands.  In the assignment, Sweco has been given responsibility for detail design of the new waste ...


    By Sweco

  • Properties of CNT reinforced: PMMA nanocomposites and PMMA treated in NH3-gaseous atmospheric dielectric barrier discharge

    Polymethylmethacrylate (PMMA) polymer is a common dental laboratory and clinical material attracting various applications in plastic and adhesive dentistry. In direct contact with cellular tissues, PMMA may have toxic and inflammable properties which may limit use in contact with living dental tissues. By reinforcing PMMA with carbon nanotube and dielectric Nitrogen doping (in ammonia ...


    By Inderscience Publishers

  • Fine-tuning acoustic isolation in buildings

    ACCIONA Infrastructure is ranked among the leading construction companies in the world - and is recognised for implementing the most advanced and innovative technology.  As research and design is vital to keep the company at the cutting edge in relation to technological developments, ACCIONA Infrastructure created a team to analyse noise and vibration. Where traditional ...

  • Noise, sound, decibels, hearing

    A decibel–a measure of sound. Like all short answers, this one leaves out a lot. When we hear a sound, its because our brain has received a nerve impulse from the nerve cells in the Inner Ear, which consist of a bone, called the Cochlea because it resembles a snail shell. These cells have long “hairs” that project into fluid inside the cochlea. There is a hole in the cochlea ...

  • National Aerospace Laboratories (CSIR) – celebrating 50 years of excellence

    National Aerospace Laboratories (NAL), Bangalore is a constituent of the Council of Scientific and Industrial Research of India (CSIR). Originally started as National Aeronautical Laboratory, it was renamed National Aerospace Laboratories to reflect its major involvement in the Indian space programme, its multidisciplinary activities and it’s global positioning. Over the last five decades ...

  • Concrete Grinding Tools

    Concrete Grinding Tools,Concrete Crushing Machine,Crushed Concrete Concrete grinding tools are fast and reliable solution for smoothing out bumps and other irregularities in both horizontal and vertical concrete surfaces. Our concrete grinding machines use rotating discs to perform a variety of projects, from light task to open ...


  • Automatic waste wood processing in the production of kitchen worktops case study

    Nolte Küchen GmbH & Co.KG, an established kitchen manufacturer with its registered office in Löhne has commissioned a new production plant for the manufacture of kitchen worktops at their location in Melle early in 2008.The company uses shredders from WEIMA Maschinenbau GmbH in Ilsfeld for processing waste wood accumulating from the manufacturing process in the highly-automated ...


    By WEIMA

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you