vibration meter manufacturer Articles

  • GKN aerospace success with portable impedance meter

    The GKN site in Cowes, Isle of Wight, UK, has long experience in the design and manufacture of passive sound insulation systems for air-intakes and by-pass ducts of aircraft engine nacelles. Dr. Armando Vavalle, Technology Development Engineer from GKN reports here on impedance tests conducted with Brüel &Kjær’s Portable Impedance Meter Type 9737 for the development of such ...

  • Wastewater Plant Relies on Thermal Flow Meter for Co-Gen Power Gas Blending Process

    The Rahway Valley Sewerage Authority (RVSA), which operates a large wastewater treatment plant in New Jersey, embarked on a green co-generation waste-to-energy project to power a portion of its operations. The plant performs primary, secondary, tertiary and sludge treatment processes in serving over 250,000 residential customers and 3000 industrial and commercial customers in a 40-plus square ...


    By Modern Pumping Today

  • Cirrus Research – Noise Measurement Pioneers for Over 45 Years [Video]

    Since 1970, Cirrus’ mission has been to make monitoring noise simple. More than 45 years later, we thought it was time to look back at our story so far and see what we have achieved. Join us by watching our video, which explores our history and what makes us the noise measurement pioneers that we are today. Cirrus Research ...


    By Cirrus Research plc

  • Brüel & Kjær’s radiation-resistant accelerometers

    Carrying out vibration measurements in harsh industrial environments is much easier for engineers with Brüel & Kjær’s new Type 8347-C Accelerometer. The Type 8347-C accelerometer can withstand temperatures ranging from -196°C (-321°F) to +482°C (+900°F) and has high resistance to radiation. The shear design ensures the accelerometer  superior thermal ...

  • Helping Volvo maximise uptime

    With the many challenges facing the automobile industry, such as shortened development times, Volvo is increasingly moving its Noise, Vibration and Harshness (NVH) development into computer simulation and modelling, with less traditional prototyping. A well-established customer of Brüel & Kjær, Volvo benefits greatly from the value added to their systems in terms of the minimised ...

  • Automatic waste wood processing in the production of kitchen worktops case study

    Nolte Küchen GmbH & Co.KG, an established kitchen manufacturer with its registered office in Löhne has commissioned a new production plant for the manufacture of kitchen worktops at their location in Melle early in 2008.The company uses shredders from WEIMA Maschinenbau GmbH in Ilsfeld for processing waste wood accumulating from the manufacturing process in the highly-automated ...


    By WEIMA

  • Concrete Grinding Tools

    Concrete Grinding Tools,Concrete Crushing Machine,Crushed Concrete Concrete grinding tools are fast and reliable solution for smoothing out bumps and other irregularities in both horizontal and vertical concrete surfaces. Our concrete grinding machines use rotating discs to perform a variety of projects, from light task to open ...


  • National Aerospace Laboratories (CSIR) – celebrating 50 years of excellence

    National Aerospace Laboratories (NAL), Bangalore is a constituent of the Council of Scientific and Industrial Research of India (CSIR). Originally started as National Aeronautical Laboratory, it was renamed National Aerospace Laboratories to reflect its major involvement in the Indian space programme, its multidisciplinary activities and it’s global positioning. Over the last five decades ...

  • Fine-tuning acoustic isolation in buildings

    ACCIONA Infrastructure is ranked among the leading construction companies in the world - and is recognised for implementing the most advanced and innovative technology.  As research and design is vital to keep the company at the cutting edge in relation to technological developments, ACCIONA Infrastructure created a team to analyse noise and vibration. Where traditional ...

  • Reducing noise levels through engineering controls

      It"s fairly easy to control personal exposure to noise by limiting exposure time or using hearing protectors like ear plugs or ear muffs.  Engineering controls are usually applied to the machinery that produces noise. Imagine a 200 foot x 175 foot manufacturing facility with a 30 foot high ceiling.  In this building are a variety of cut-off saws, grinders, millers and other ...

  • Batch blenders make modern mortars in China

    With no internal moving parts, blenders minimize abrasive wear and simplify cleaning at two SureBlock plants. In 1997, US-based SureBlock entered a joint venture with China's Tianjin People's Building Material Products Factory to make concrete masonry units (CMUs). Commonly known as concrete blocks, CMUs come in many shapes, sizes, and colors. They are mainly used to erect structural walls, ...

  • Look what’s cooking in the world of renewable energy

    The solar and wind innovations that got us where we are today — and those waiting in the wings — point to a hopeful future. Inside a sprawling single-story office building in Bedford, Mass., in a secret room known as the Growth Hall, the future of solar power is cooking at more than 2,500 °F. Behind closed ...


    By Ensia

  • D.I.Y. Studio Construction

    CHAPTER 1. Introduction Being an engineering company specialized in noise and vibration control we often come across applications in music studios. Noise transmission in studios can be airborne (transmitted via the air) but also structure borne (transmitted via the building elements). Due to the large wave lengths occurring from low frequency sounds ...


    By ALPHA ACOUSTIKI Ltd.

  • Wind turbine controlling of the future

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? And how should a future wind sensors look like? After analysing the current conditions and trends on the wind energy market, our CEO Klaus Hirzel compiled a wish list for future wind sensors. ...

  • Dry mortar produced according to the state of the art

    Oradea – a town in Northwestern Romania, near the Hungarian border, is the birthplace of Adeplast, a Romanian group of companies. In 1996, Marcel Bărbuţ, became the majority shareholder of the company established in 1994 under the name Multistar Prod S.R.L. and transformed it into a Romanian-Austrian company. The link to Austria is obvious with Marcel Bărbuţ, ...

  • Controlling scale deposits in the pulp & paper industry

    The pulp and paper industry is one of the heaviest users of water within the North American industrial economy, requiring on average 54 cubic meters of water per metric ton of finished product.  As water is used in nearly every part of the manufacturing process, accumulation of scale is a phenomenon that can occur in all pulp and paper making processes. This occurs even with the purest water ...

  • Improving Performance · Processing Equipment Retrofit at Florida Composting Facility

    PALM Beach County, Florida may have been confused during the last presidential election but there is no confusion about management of the county’s organic waste stream. Palm Beach County has a population of approximately 1.2 million people and the Solid Waste Authority of Palm Beach County is responsible for the management and disposal of the solid waste that is generated here. The authority ...


  • Higher-Quality Pumps Work Best For Bulk Liquid Terminals

    When you’re running a dockside petroleum liquid products, chemicals and LPG/LNG or multiple bulk liquids terminal, your reliability as a supplier – and the ability to win repeat business – is heavily reliant on the quality of the fluid-handling equipment and pumping systems on hand. Reliability rules For terminal operators, reliable handling and high transfer ...


    By DESMI A/S

  • Introduction to the BioCar Nature Based Transportation Systems

    The people of the world are rapidly growing aware of the full impact of current transport systems upon their safety, economy, health and environment. This has not been lost on the major auto companies who have spent millions of man-hours and billions of dollars over the last decade in pursuit of the Next Generation Vehicle. But they have little to show for their efforts having been increasingly ...


  • Successful Dunbar Field Life Extension

    The advent of high-power multiphase pumps is changing the world of oil production. In particular, they allow continued production from fields that are nearing the end of their useful lives. These revolutionary pumps have been in operation since autumn 1999 on the Dunbar platform, in the UK sector of the North Sea. Multiphase pumping (MPP) is essentially a means of adding energy to the ...


    By Sulzer

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you