vibration monitoring equipment Articles

  • The vibration monitoring evolution

    A recent report from Markets & Markets estimated that demand for vibration monitoring systems will reach nearly $1.5 billion by 2020. That’s a staggering increase of around 50% compared with today – with a compound annual growth rate (CAGR) of more than 6.5%. Is this growth a big surprise though? As a company that has seen first hand the rapid evolution of the ...


    By Hansford Sensors

  • Vibration monitoring and analysis in aircraft engine test cells

    Snecma, part of the SAFRAN group, is dedicated to the production of engines for both air and space. Working alone or in partnership, Snecma designs, develops and produces engines for civil and military aircraft, launch vehicles and satellites. The company is organised in three divisions: Commercial Engines – Snecma and GE Transportation team up to produce the bestselling family of CFM56 ...

  • Opening the envelope on bearing vibration

    A sophisticated signal processing technique can help to pinpoint bearing failure at an early stage. Chris Hansford, Managing Director at Hansford Sensors, explains. Experienced operators can often tell if a machine is not working properly, on the basis that is does not ‘sound right’. The same principle can be applied – using modern electronics – to identify the exact cause ...


    By Hansford Sensors

  • Vibration testing of fuel probes

    Aerial Refuelling The American Bell-Boeing V-22 Osprey is a multimission, military, tilt rotor aircraft with both a vertical and short takeoff and landing capability. It combines the functionality of a conventional helicopter with the high-speed cruise performance of a long-range turboprop aircraft. But even though it is long-range, some missions require in-flight refuelling. The V-22 Osprey can ...

  • Noise and vibration compliance management made simple

    Noise and vibration from large projects has the potential to cause nuisance in the community and trigger complaints. If not managed properly this can cause delays, increase project costs, and lead to litigation. Construction Sentinel Construction Sentinel is a web-based subscription service that provides everything you need to meet your ongoing noise and ...

  • Noise and vibration compliance management made simple

    Noise and vibration from large projects has the potential to cause nuisance in the community and trigger complaints. If not managed properly this can cause delays, increase project costs, and lead to litigation. Construction Sentinel Construction Sentinel is a web-based subscription service that provides everything you need to meet your ongoing noise and ...

  • Noise and vibration compliance management made simple

    Noise and vibration from large projects has the potential to cause nuisance in the community and trigger complaints. If not managed properly this can cause delays, increase project costs, and lead to litigation. Construction Sentinel Construction Sentinel is a web-based subscription service that provides everything you need to meet your ongoing noise and ...

  • Vibration surveillance: Oil rig – Power generator - Case Study

    Equipment, plant overview, Context Oil rigs are located in Gulf countries, Emirates.Rigs are operating 24/7 and powered by quite big power generator 436 kW. According to operator, generator was running at higher temperature than expected. Due to the periodic displacement of the generator in the oil field, no wired monitoring system was possible. The Wi-care sensors (6) ...


    By Wi-Care

  • TRaC UK – LDS V984 vibration testing of fuel probes for the V22 Osprey

    The Partnership Founded in 1934 as Flight Refuelling Limited (FRL), Cobham plc is a British manufacturing company based in Wimborne Minster, Dorset, England. It is organised into four core technology divisions – Mission Systems, Defence Systems, Avionics and Surveillance, and Aviation Services. The Cobham Mission Systems Division claims to be the world market leader for air-to-air ...

  • The future is condition monitoring

    It’s been a big month here at Hansford Sensors. We kicked off November by celebrating our 10thanniversary, during which time we were playfully predicting what our company may look like in another decade. While our thoughts on this are strictly hypothetical at this stage, thanks to the release of a new report we now have a better idea of the state of the condition monitoring ...


    By Hansford Sensors

  • Marine Monitoring to Maximise the Performance of Marine Machinery

    Considering the cost of putting to sea, it is well worth investing in vibration monitoring equipment that can help engineers to protect and maximise the performance of marine machinery. Here, we discuss the challenges facing engineers and offers advice on how to successfully install and use vibration sensing equipment on marine vessels. As machinery has become more complex and mankind has ...


    By Hansford Sensors

  • Food industry: Monitoring a fan imbalance - Case Study

    Equipment, Context: The Plant is located in Northern Europe, producing amino acids amongst other products. The site is operating 24/7 all year long. The fan (impeller) is supplying drying process with hot air. Fan is unique and doesn’t receive a deep prediction system or strategy. Fan bearing housing is equipped with a vibration ...


    By Wi-Care

  • Construction and Civil Infrastructures Monitoring Systems

    Civil infrastructures are usually monitored through its whole life cycle. SHM (Structural Health Monitoring) technologies enable the estimation of the structural state and detection of structural change that affects the performance of a structure. Two discriminating factors in SHM are the time-scale of the change (how quickly the state changes) and the severity of the change. These factors ...

  • Continuous, Centralized Monitoring Drives O&M Optimization

    In a survey conducted by Wind Energy Update this year, 80% of wind turbine owners indicated they take either a predictive or preventative approach to maintenance. Furthermore, 77% indicated that they deploy Condition Monitoring Systems (CMS). “If you can leverage data to increase plant performance by even 1%, you are looking at significant impacts to your revenue”, EDF’s ...

  • Solar/wind power for noise monitoring terminals

    Solar Power Solutions A noise monitoring terminal’s (NMT) low power consumption and its ability to operate fully without power hungry cooling and heating units inside its enclosure mean that it is suitable for power from solar panels. The NMT may be continuously powered by battery which in turn is kept charged via solar energy. This solution is most appropriate in areas where there ...

  • Differential Pressure and Temperature Monitoring in a Hospital Cleanroom

    Accsense A1-01a Wireless Environmental Data Loggers CHESTERLAND OH—April 9, 2012 CAS DataLoggers recently provided the wireless pressure and temperature monitoring solution for a hospital maintaining a surgery cleanroom to protect patients from a variety of environmental contaminants. Staff entered and exited through airlocks and were required to wear cleanroom suits before entering. Air ...


    By CAS DATALOGGERS

  • Monitoring of typical pumps and aerator in a water treatment plant - Case Study

    Equipment, Context: Surface aerator:Vertical equipment, gearbox associated very high cost for wired solution, aggressive environment, very few visual and periodical inspections. Centrifugal pump: Located underground in concrete basement, busy area, pipes and metal structure all around. Effluent pump: Vertical equipment, ...


    By Wi-Care

  • Predicting Bearing Failures and Measuring Lubrication Film Thickness in Your Plants Rotating Equipment

    ABSTRACTTypically there are two options of maintenance concerning bearings, one is to lubricate them the other is to change them. Monitoring bearing condition is critical to insure reliability. The equipment in water and wastewater plants is an asset that must be managed and prolonging its life will insure a positive contribution to your plants operating efficiency. By incorporating a ...

  • Petrochemistry: Monitoring the magnetic clutch of a boiler fan - Case Study

    Equipment, Context:   The manufacturing site is a steam cracker in Europe operating 24 hours 7 days a week. To ensure its production, the plant has three boilers supplying in vapor several steam turbines and furnaces. The monitored equipment is a fan linked to a boiler. Fan is equipped with a magnetic-clutch allowing a driving ...


    By Wi-Care

  • Short-term noise monitoring with Delta Acoustics case study

    Noise monitoring does not require a large amount of expertise or investment in expensive equipment. DELTA learned how measurement projects with high technology demands could easily be solved with a Noise Sentinel On Demand subscription. Challenge Demands for quick calculation validations on noise measurements that had to comply with strict ISO regulations ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you