vibration monitoring equipment manufacturer Articles

  • Vibration testing of fuel probes

    Aerial Refuelling The American Bell-Boeing V-22 Osprey is a multimission, military, tilt rotor aircraft with both a vertical and short takeoff and landing capability. It combines the functionality of a conventional helicopter with the high-speed cruise performance of a long-range turboprop aircraft. But even though it is long-range, some missions require in-flight refuelling. The V-22 Osprey can ...

  • TRaC UK – LDS V984 vibration testing of fuel probes for the V22 Osprey

    The Partnership Founded in 1934 as Flight Refuelling Limited (FRL), Cobham plc is a British manufacturing company based in Wimborne Minster, Dorset, England. It is organised into four core technology divisions – Mission Systems, Defence Systems, Avionics and Surveillance, and Aviation Services. The Cobham Mission Systems Division claims to be the world market leader for air-to-air ...

  • Construction and Civil Infrastructures Monitoring Systems

    Civil infrastructures are usually monitored through its whole life cycle. SHM (Structural Health Monitoring) technologies enable the estimation of the structural state and detection of structural change that affects the performance of a structure. Two discriminating factors in SHM are the time-scale of the change (how quickly the state changes) and the severity of the change. These factors ...

  • Continuous, Centralized Monitoring Drives O&M Optimization

    In a survey conducted by Wind Energy Update this year, 80% of wind turbine owners indicated they take either a predictive or preventative approach to maintenance. Furthermore, 77% indicated that they deploy Condition Monitoring Systems (CMS). “If you can leverage data to increase plant performance by even 1%, you are looking at significant impacts to your revenue”, EDF’s ...

  • Predicting Bearing Failures and Measuring Lubrication Film Thickness in Your Plants Rotating Equipment

    ABSTRACTTypically there are two options of maintenance concerning bearings, one is to lubricate them the other is to change them. Monitoring bearing condition is critical to insure reliability. The equipment in water and wastewater plants is an asset that must be managed and prolonging its life will insure a positive contribution to your plants operating efficiency. By incorporating a ...

  • Petrochemistry: Monitoring the magnetic clutch of a boiler fan - Case Study

    Equipment, Context:   The manufacturing site is a steam cracker in Europe operating 24 hours 7 days a week. To ensure its production, the plant has three boilers supplying in vapor several steam turbines and furnaces. The monitored equipment is a fan linked to a boiler. Fan is equipped with a magnetic-clutch allowing a driving ...


    By Wi-Care

  • What is Intrinsic safety and ATEX?

    What is intrinsic safety? Intrinsic safety (IS) is a low energy signalling technique that ensures the safe operation of electrical equipment in hazardous areas by limiting the energy – both electrical and thermal – available for ignition. ...


    By Hansford Sensors

  • Interview with John O`Higgins, chief executive of Spectris

    Environmental issues - a growing concern among organisations Presently, organisations are seriously contemplating environmental issues and are taking necessary steps towards improving their products and processes. Large companies are now focusing on reducing their carbon footprint and ensuring that their products are environment-friendly. Even in niche segments, organisations are ...

  • Brüel & Kjær’s radiation-resistant accelerometers

    Carrying out vibration measurements in harsh industrial environments is much easier for engineers with Brüel & Kjær’s new Type 8347-C Accelerometer. The Type 8347-C accelerometer can withstand temperatures ranging from -196°C (-321°F) to +482°C (+900°F) and has high resistance to radiation. The shear design ensures the accelerometer  superior thermal ...

  • Multilevel Systems

    Untitled Document Introduction A multilevel system is a groundwater monitoring device which allows ...


    By Solinst Canada Ltd.

  • Vibratory drums: two-mass vs. brute force drives

    Vibrating drums are designed using two drive designs, direct drive and two-mass. General Kinematics has had decades of experience designing both types of drive configurations, and is the exclusive manufacturer of two-mass vibratory foundry drums under US patent #'s 4,960,162, RE33,542, 5,512,008, and 5,591,074. Experience has shown two-mass vibratory drums out perform direct drive designs in all ...


    By General Kinematics

  • Catalytic Oxidizers…What You Should Know.

    Within the U.S., depending upon specific plant operations, geographic locations, etc.,  many companies concerned with controlling VOC emissions have been operating air pollution control systems for years.  However, due to business expansion, plant modifications or recent changes in EPA guidelines, an increasing number of companies are now finding it necessary to install new emission control ...


    By The CMM Group, LLC

  • Controlling Stack Emissions in the Wood Products Industry

    Electrostatic precipitation has been a reliable technology since the early 1900's. Originally developed to abate serious smoke nuisances, the manufacturers of zinc, copper, and lead quickly found electric gas cleaning a cost efficient way to recover valuable product carried out of the stacks from furnace operations. Today electrostatic precipitators are found mainly on large power plants, cement ...


  • Asset management for actuated valves in the 21st Century

    The key benefit of effective asset management for the actuated valve end user is an economic one. The implementation of preventative maintenance as the main activity in the asset management programme quickly translates into cost savings for the plant operator. This and many other benefits are facilitated and enhanced by the increased functionality inherent in modern intelligent electric valve ...


    By Rotork

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • Predictive maintenance made safer and more affordable with Rugged tablets - Case Study

    Challenge Create a safer, more cost-effective predictive maintenance solution that survives in challenging industrial environments. Solution Build a modular, BT-enabled system using data acquisition hardware and rugged data collection tablets. Result A more sustainable instrument that lowers costs for ...


    By Handheld UK and Ireland Ltd

  • Gas cell selection for analysis of electronic gases

    APIMS and FTIR remain the preferred analytical tools for monitoring impurities in the electronic  specialty gases used by the semiconductor industry, although other tools such as CRDS are currently finding application in selected cases. FTIR spectroscopy offers the advantage of the simultaneous measurement of all gaseous species that exhibit dipole moment changes during vibrations at ...


    By CIC Photonics, Inc.

  • Typical process weighing applications

    Process weighing relates to the weighing of a powder material as part of a production process. The technology includes continually monitoring a material in a silo, discharging material by weight or rate, or even weighing products on the move. This article gives an overview of most of the typical process weighing applications that are used in all sorts of industries: level or inventory measuring ...


    By Hardy Process Solutions

  • High-strength wastes boost biogas production

    Water and wastewater treatment plants (WWTP) are significant consumers of energy. The U.S. Environmental Protection Agency estimates the industry uses the equivalent of 56 billion kilowatt hours (kWh) of electricity, representing three percent of the nation’s energy consumption, and is responsible for creating 45 million tons of greenhouse gas emissions each year. Energy intensive processes, such ...


    By BioCycle Magazine

  • Brüel & Kjær accelerometers - 65 years of excellence

    The Thirties Already before the two young engineers Per V. Brüel and Viggo Kjær graduated as Masters of Electrical Engineering in 1939, they had decided to start a company together. However, they felt it was necessary to learn more and get some practical experience before actually going ahead, so P.V. Brüel became assistant to professor P.O. Pedersen in the newly created ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you