vibro-mechanical stand Articles

  • HS-200 Stands the test of heavy manufacturing

    A manufacturer of aircraft component generates a free and emulsified oily wastewater, which results from their machining, milling, cutting, and other operations. Presently, they are using skimmers and dissolved air flotation to remove oil from the water. To remove their heavy metals they follow up with flocculation, precipitation and clarification. Due to the rapidly ...


    By Hydrosil International

  • A combined electro-mechanical control technique for dynamic voltage regulation of a stand-alone wind turbine generator

    This paper introduces a computer-based model and dynamic simulation of a combined electro-mechanical control technique for a stand-alone wind turbine generator system. The presented combined control technique consists of three closed loops for speed regulation, nacelle alignment and dynamic load voltage regulation. Speed regulation is achieved by adjusting the pitch angle of the turbine blades. ...


    By Inderscience Publishers

  • If you can’t stand the CO2, get out of the kitchen – Part 2

    In Part 1 we reviewed the many standards, specifications and technical bulletins on commercial kitchen ventilation that have been published since 2000. In Part 2 we investigate four of the more recent ones, with a particular focus on carbon dioxide (CO2) ...


    By Analox Sensor Technology

  • ArmorMax stands up to Hurricane Gustav and IKE case study

    When Hurricane Katrina made landfall on August 29, 2005 it caused devastating flood damage to large portions of southeastern Louisiana—but it was not the only hurricane to hit the area that year. Hurricane Rita made landfall in late September, causing catastrophic tidal inundation to the community of Lafitte as it passed south of Jefferson Parish, Louisiana. One of the many levees that ...

  • Thermal Energy International Raises The Bar On Thermal Efficiency At Stand H41 At Energy Solutions Expo

    Thermal Energy International Inc. (TEI) will be exhibiting its range of awarding winning energy efficiency products at stand H41 at the Energy Solutions Expo at Olympia, London on the 11th and 12th October.  TEI’s products include its GEM venturi orifice steam traps and its flue gas condensing heat recovery ...

  • The Clean Development Mechanism: Kyoto Comes Home to Roost

    The Clean Development Mechanism - a cornerstone of the Kyoto Protocol which allows industrialised nations to invest in emission reduction projects in the developing world - is inching towards reality. This summer, the European Commission unveiled plans to let companies buy CDM credits to help meet their targets under the EU emissions trading scheme. But long-running controversies over the CDM's ...

  • Conservation carbon: A new voluntary market mechanism to protect forests

    Addressing deforestation is critical to mitigating climate change, and also has the potential to deliver significant social benefits to local communities and additional environmental co-benefits. Any consideration of forests and deforestation under the UNFCCC or Kyoto Protocol is expected to occur within this framework of emissions and emission reductions calculated against a baseline or ...

  • Mechanical treatment of automobile shredder residue for its application as a fuel

    Enforcement of the Automobile Recycling Law in Japan requires utilization of automobile shredder residue (ASR). However, the high contents of copper (~5%) and chlorine (~1%) in ASR stand in the way of practical application. We studied methods for the removal of copper and chlorine from ASR so that it could be utilized as a fuel. By compression of the ASR for solidification with an extruder, the ...


    By Springer

  • OSE II economic comparison to dispersants and mechanical Clean ups

    INTRODUCTION   Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment. In comparison, current response methods employed by three major oil companies - BP, Exxon ...

  • Effectiveness of subsidies for the Clean Development Mechanism: Past experiences with capacity building in Africa and LDCs

    Given the lack of Clean Development Mechanism (CDM) activities in least developed countries (LDCs), subsidies for CDM projects have been suggested as a remedy. To date, subsidies spent in the CDM context have been limited to capacity building. Donor agencies have provided close to EUR45 million for awareness raising, institutional capacity building and project development in Africa and LDCs over ...

  • Coal Vibrating Screen

    Coal Vibrating Screen, Screen For Coal Preparation We have a wide range of Vibrating screens suitable for various screening application. The  Coal Vibrating Screens are used to separate materials into various sizes for further processing in Crusher. ...


  • Verification of Wind-Driven Volatilization Models

    Abstract  Mass-transfer processes of paramount importance, such as reaeration and volatilization, occur at the air–water interface. Particularly, volatilization is intensively studied because it can be a relevant removal process for toxic contaminants from flowing and standing surface waters. The paper provides a comparison among predictive equations available from literature for standing ...


    By Springer

  • Wind Energy Technologies: Technology, Market and Costs

    Technology Overview   These large wind turbines turn Midwestern wind into utility electricity. Wind turbines convert the power in the wind into electricity. By extracting the kinetic energy in the wind, wind turbines generate mechanical power. In the past, mechanical wind machines were widely used for specific tasks, such as pumping water or grinding grain. Today, wind ...

  • China Wind Power 2010 - an enlightening exhibition

    China Wind Power is the largest wind energy event in Asia, where some 500 exhibitors displayed their products this October – a 25% increase on 2009. The event was hosted by the major organisations in the wind energy industry in China: Global Wind Energy Council (GWEC) China Renewable Energy Industries Association (CREIA) Chinese Wind Energy Association (CWEA) ...

  • Mixing and matching instrument components

    China Wind Power is the largest wind energy event in Asia, where some 500 exhibitors displayed their products this October – a 25% increase on 2009. The event was hosted by the major organisations in the wind energy industry in China: Global Wind Energy Council (GWEC) China Renewable Energy Industries Association (CREIA) Chinese Wind Energy Association (CWEA) ...

  • TopAir`s Fume Hood

    TopAir, Statitech Israel’s flagship brand, manufactures a full line of superior cleanroom equipment including a reliable fume hood for neutralizing potential airborne chemical hazards in the laboratory. The fume hood mechanism offers maximum protection to laboratory staff working at a cleanroom table under the fume hood.   There are two basic types of fume hood. Many industries use a ...


    By TopAir Systems

  • Climate change mitigation: overview of the environmental policy instruments

    Climate variability has been observed over a long period of time and is considered a natural process occurring on Earth. Climate change, however, is attributed directly or indirectly to human activity that alters the composition of the global atmosphere in addition to natural phenomena. Global climate governance requires a broad area of measures and policies to be implemented worldwide to tackle ...


    By Inderscience Publishers

  • Nanofluidics and the Navier boundary condition

    Nanofluidics is the study of fluid flow in or around nano scale systems. At this scale, conventional ideas of fluid mechanics do not apply, and the long-standing traditional approaches to fluid mechanics problems need to be adjusted to correctly reflect the importance of the interaction between a fluid and a solid boundary. This is because as devices are miniaturised, the surface-to-volume ratio ...


    By Inderscience Publishers

  • Safety corner - Ergonomic considerations for the wastewater treatment plant

    If you have ever had your golf swing assessed or changed the height on your desk chair, you have had an ergonomic experience. Ergonomics is an assessment of work spaces to reduce physical injury produced by repetitive job requirements. Ergonomics considerations cross every work type, from golf pros to lab technicians. Review of body mechanics while performing a job, with options of change to ...


    By GillTrading.com, Inc.

  • Wind erosion of waste impoundments in arid climates and mitigation of dust pollution

    Wind can erode and disperse fine-grained material from an impoundment of mining, industrial or municipal waste that stands above the level of its surroundings. Such dust dispersion can be a serious nuisance as well as a health hazard to inhabitants and animals in nearby settlements. It can also degrade crops, making them less marketable, and pollute soil, surface water and ground water. Wind can ...


    By SAGE Publications

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you