vibro-mechanical stand Articles

  • Greenhouse Gas Mitigation in Australia: An Overview of the Current Policy Landscape

    This report outlines Australia’s policy framework for greenhouse gas emissions reduction, identifies areas of potential change in the near term, and attempts to evaluate the impact of current policies on Australia’s emissions trajectory to 2020. It assesses Australia’s international commitments, and the major policies of federal and state institutions to reduce emissions. It ...

  • St. Angela`s sewage treatment plant

    Address: St. Angela's College, Co. Sligo Client: St. Angela's College/ Dept. Of Education Engineer/Client Contact Details: Jennings O'Donovan & Partners, Finisklin, Sligo David Kiely, Ph: 071 9161416 0 Completion Date: November 2000 Population Equivalent: 250 P.E. Value: ...

  • Large volumes compressed into small volumes saves costs case study

    Vöhringer GmbH with its 120 staff and ultramodern machine park in Trochtelfingen each day processes up to 40,000 m2 of sheeting. This is mainly used for manufacturing specialist furniture parts up to complete furniture sets – especially for caravans and mobile homes but also for exhibition stand construction, for doors and the furniture industry. Chippings and dust accumulating during ...


    By WEIMA

  • Amager Bakke / Copenhill Copenhagen, Denmark - Case study

    Copenhagen’s state of the art plant sets new standards for environmental performance, energy production and waste treatment. Innovative technology and architecture integrate to form a future in which waste-to-energy plants are welcomed in any backyard. In year 2017, Copenhageners and visitors will witness a  ...


    By Dürr Megtec LLC

  • Fully automatic prime/re-priming system handles air/liquid mixtures with ease

    Cornell’s Redi-Prime® system addresses the fundamental requirement of customers to have pumps that are easy to operate, re-prime under lift condition, and eliminate carry-over issues of liquids when priming the pump.  Repriming becomes important when entrainment (due to a snore condition) or vortexing occurs. The vacuum pump is always running, so when the liquid ...


    By Cornell Pump Company

  • Pike`s hunting club diesel on frame trailer pumps-case study

    Pike's Hunting Club promises the finest duck hunting you will find anywhere - aided by planned water management and Crisafulli Pumps. At Pike's Hunting Club in Marion, IL, the creation and preservation of waterfowl habitat, coupled with water control, are essential elements in the Club's ability to provide the best possible waterfowl hunting experience. According to John Pike, one of the ...


    By SRS Crisafulli, Inc.

  • Pike`s Hunting Club diesel on frame trailer pumps-case study

    Pike's Hunting Club promises the finest duck hunting you will find anywhere - aided by planned water management and Crisafulli Pumps. At Pike's Hunting Club in Marion, IL, the creation and preservation of waterfowl habitat, coupled with water control, are essential elements in the Club's ability to provide the best possible waterfowl hunting experience. According to John Pike, one of the ...


    By SRS Crisafulli, Inc.

  • Software: the marriage and benefits of operational software and gps technology

    There are several software vendors that provide operational tools to help manage and grow your business. When choosing a software vendor, look for a product that is comprehensive to benefit all aspects of your business including operations, customer service and accounting to help you to streamline these areas of your business: Customer and job site tracking and a mechanism to record ...


    By Waste Advantage Magazine

  • 3 Key initiatives from Australia’s Climate Change Policy

    Australia is a major nation to watch when it comes to curbing climate change. The country made an international commitment to reduce its GHG emissions by 5 to 25 percent from 2000 levels by 2020. How Australia achieves these reductions can provide lessons on how other countries around ...

  • Weigh batching: the benefits of an automated system

    In many plants that batch-blend bulk products, weigh batching is a manual, time-consuming operation in which ingredients are weighed individually before being charged to a blender or other process vessel. A significant number of such plants could benefit from the installation of an automated weigh batching system. For small as well as large operations, an automated weigh batching system can pay ...


    By Flexicon Corporation

  • Utilisation of landfill gas for the generation of energy

    The gases in landfill sites that develop during degradation processes, largely contribute to the greenhouse effect and additionally harbour considerable safety and health hazards. However, they are also often rich in methane and therefore a potential energy carrier. In many countries much of this potential for the generation of electricity and heat from landfill gas still exists. Furthermore, ...


    By Hofstetter BV

  • Beale air force base receives recognition for outstanding refrigerant management and saves US$45,000

    The United States Air Force is strongly committed to promoting best practices in environmental management and operational efficiencies that enable cost savings at its facilities around the world. At Beale Air Force Base in California, both of these goals are being achieved at once. Two long-standing champions of data automation technologies for the base's refrigerant management processes, Dennis ...


    By IHS Markit

  • atg UV drives value & performance into ageing UV systems - Case Study

    Client: Dee Valley Water   Location: North West Description: Dee Valley Water choose atg UV to replace their ageing UV systems by retrofitting their existing infustructure. atg UV Technology were selected by Dee Valley Water to increase performance and drive value into their existing UV treatment facility by retrofiting their ...


    By atg UV Technology

  • New single-shaft waste shredder set to take UK by storm

    Riverside Waste Machinery – one of the country’s leading providers of waste balers and shredders – is set to take the waste management industry by storm this summer when it introduces a powerful new innovation in single-shaft engineering to the UK marketplace. Hot on the heels of the successful TR launch ...


    By UNTHA UK LTD

  • Facility safety management - MC Technologies spurs innovation in hazardous chemical management

    Hazard Controls for Chemical Use Just MSDSs Are Not Enough to Protect Workers More than 20 years after the Employee Right to Know Act gave new rights to employees who work in facilities that store hazardous chemicals, individuals in the workplace are still being critically injured, still being diagnosed with terminal illness, and still dying from exposure to hazardous chemicals. ...

  • Blazing the plastics recycling trail

    In the past year, MBA Polymers has opened two facilities showcasing its high-tech recycling process for plastics from end-of-life durable goods. Those plants, in China and Austria, are just the beginning for this plastics recycling pioneer; over the next two years, the company is hoping to announce at least one additional facility in Europe as well as the development of another operation in Asia. ...

  • To integrate, or not to integrate...

    While environment, health, safety (EHS) and quality management issues are often handled by individual management systems, the guiding principles behind each of these areas share a common link — W. Edwards Deming. The American quality guru is most commonly associated with the Plan-Do-Check-Act (PDCA) cycle, an iterative problem-solving process used to resolve quality issues and improve ...


    By Intelex Technologies Inc.

  • How not to move forward on achieving sustainability

    A new intergovernmental panel would not be the best way of tackling the multifaceted challenges of sustainable development. Whatever its faults, the Intergovernmental Panel on Climate Change (IPCC) has successfully brought global warming to the attention of policymakers. It has marshalled scientific evidence for ...


    By SciDev.Net

  • Hydraulic Dredging: A cost effective solution for most dredging tasks

    The vast majority of dredging jobs require removal of solids to depths of 30 feet or less. Several features enable hydraulic dredges to be the solution of choice for these applications. First, what are hydraulic dredges and how do they compare with alternative mechanical dredge types? Hydraulic dredges create slurries, combinations of solids and water, pump the slurries to the ...


    By SRS Crisafulli, Inc.

  • How do i verify that my scale system is Balanced?

    Have you ever wondered how to check the mechanical or load cell signal balance on your weighing system? Here's how. Verifying that your scale system is balanced helps to provide you with accurate readings. Load sharing is important to ensure stability of the vessel and scale. Any imbalance between load cells would have to be dramatic to make the scale unstable. For example, standing on a floor ...


    By Hardy Process Solutions

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you