voc abatement requirements Articles

  • Minimizing Operating Costs in VOC Abatement Equipment

    Untitled Document As governmental regulations of environmental emissions become more restrictive, the average concentration of Volatile Organic Compounds (VOC's) has decreased as more ...

  • Regenerative Thermal Oxidizer + Zeolite Wheel for VOC Emissions Abatement - Case Study

    Case Study: “Heceygo Project” Ehaust Air Treatment Regenerative Thermal Oxidizer For Voc Emissions Treatment ZEOLITE ROTOR-CONCENTRATOR + REGENERATIVE THERMAL OXIDIZER The Technical Solution For Large Air Flows With Low Solvent Concentrations PROJECT MAIN DATA: ...


    By Tecam Group

  • Case study - ETO sterilizer abatement

    OVERVIEW Product sterilization companies are generally required to utilize a pollution control device for treatment of exhaust gases from their aeration room and sterilization chambers.  In the United States, they need to be in compliance with NESHAP (National Emission Standards for Hazardous Air Pollutants) regulations that dictate a 99% destruction efficiency of EtO (Ethylene ...

  • Case study - Solid waste gasification pollution abatement

    Catalytic Products International has partnered with a Gasification System Designer in the design and supply of a unique thermal oxidizer for use with a closed loop batch pyrolysis gasification system. The gasifier is engineered to create a clean combustible syngas from a broad spectrum of dissimilar carbonbased solids, liquids, and other feedstocks. The QUADRANT NR – SEVERE DUTY Thermal ...

  • Case study - Landfill waste gas abatement

    For over 43 years Catalytic Products International has designed and manufactured specialized oxidation systems for use in controlling process-related VOC emissions. The QUADRANT-NRV Series Thermal Oxidation System is designed for use with the low-volume/high-BTU waste gas stream emitted from many landfill gas purification processes. As we utilize our Venturi Burner Package to process the waste ...

  • Potential of biofiltration for VOCs emission control and safety aspects

    Directive 99/13/EC on the emission of Volatile Organic Compounds (VOCs) is impacting on several industries in Italy, as well in other EU countries. Many small enterprises have to invest in new control systems and need to be helped to choose an appropriate and safe technology. As VOCs are highly flammable compounds, high concentrations in emission flows can pose a fire and explosion hazard if ...


    By Inderscience Publishers

  • Single-valve RTO Eliminates Odors and VOC

    Untitled Document Less expensive to purchase, ...

  • Case study - RTO handles high VOC loading at silgan containers

    OVERVIEW Regeneration Game - Originally printed in The Canmaker Magazine - Sayers Publishing Group As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking plant in the ...

  • Nature’s Own - Biofiltration process offers promise of (near) energy-free pollution abatement

    A filter could be described as any substance through which liquid is passed to remove suspended impurities. Although a “biofilter” is actually not a filter, “biofiltration” is on the threshold of finding a market as a compliance solution for air pollution regulations after a number of false starts. Biofilters have long been used as a means for reducing objectionable odors in Germany, the ...


  • For VOC emissions treatment: Regenerative Thermal Oxidizer + Zeolite rotor-concentrator - Case Study

    Case Study: “Heceygo Project” EXHAUST AIR TREATMENT REGENERATIVE THERMAL OXIDIZER FOR VOC EMISSIONS TREATMENT ZEOLITE ROTOR-CONCENTRATOR + REGENERATIVE THERMAL OXIDIZER  The Technical Solution For Large Air Flows With Low Solvent Concentrations   PROJECT MAIN DATA: CUSTOMER NAME: Heceygo PROJECT SIZE: ...


    By Tecam Group

  • Preventative Maintenance Solutions for Air Pollution Control

    Production output and cost control can be difficult to obtain consistently in any manufacturing operation.  In this white paper, we describe one facility’s experience with installing and maintaining a Volatile Organic Compound (VOC) control system. This is a typical example of how a preventive maintenance plan can ensure the control system operates with 100 percent reliability, how ...

  • EIS Safety First - Case Study

    EIS was invited by a UK company to provide a fully automated VOC / odour abatement system treating the exhausts from multiple processes and needing multiple safety systems.  The abatement plant would be part of the construction of a new factory based in Scotland, so the timing and installation of the system would be critical to the plant coming on stream at the planned date. The production ...

  • Off-the-Shelf Haden Technology in Reach of Smaller Manufacturers

    OFF-THE-SHELF HADEN TECHNOLOGY IN REACH OF SMALLER MANUFACTURERSSMALL, BUT BEAUTIFULLY ENGINEERED Every manufacturer whose process gives rise to VOC emissions needs to comply with Environmental Protection Act regulations. He or she needs to employ the best available technology and engineering design to ensure their process is not a cause of air pollution. But what if you are a small ...


  • Product Spotlight: Regenerative Thermal Oxidizer case study

    Oxidizer case histories in the pharmaceutical industry The pharmaceutical industry faces unique challenges in complying with environmental pollution and emission control regulations. Three pharmaceutical process case studies are examined: fluidized bed drying, tablet coating and reaction vessels, and batch operations. Recently, a contract drug manufacturing company faced violation ...

  • Controlling Pharmaceutical Coating & Drying Process Emissions

    Capturing and destroying harmful emissions from pharmaceutical processes can be challenging. It’s not because the volatile organic compounds (VOCs) are difficult to destroy using catalytic or thermal techniques. It’s because their concentrations can be so high. These process streams raise safety concerns, both when they’re collected in vents and when they reach the final ...

  • Case study - Printed circuit board emissions

    Overview One of the world's largest printed circuit board (PCB) manufacturers was required to install air pollution abatement equipment to control the VOCs emitted during their soldering and coating process. Three main considerations were important to the customer: The need for a system with a competitive capital cost and the lowest possible operating cost ...

  • Maintenance solutions for air pollution control equipment

    Manufacturing facilities are constantly under pressure to meet production forecasts at the lowest possible cost. These two goals; production output and cost control, can be difficult to obtain consistently in any manufacturing operation. Additional frustration to meet these goals can be exaggerated in today’s lean manufacturing climates that have trimmed budgets and reduced workforce. ...

  • Case study - Rubber curing emissions

    Overview A rubber curing company was looking for a new, affordable abatement solution to treat their blue haze and low-level Volatile Organic Compounds (VOCs) in order to meet regulatory requirements. The large Electrostatic Precipitator (ESP) in use was extremely expensive to operate and maintain. The company began their search for a system that offered effective opacity control and ...

  • Compliance Issues Facing Midstream Production - Case Study

    It’s in the news every day; the natural gas production industry is experiencing record growth. The gas reserves in the United States are thought to hold enough natural gas for hundreds of years and the gas and oil industry has improved extraction techniques that make gas production more affordable and less impactful on the landscape. This is good news for the country and our environment. ...

  • Thermal oxidizers for natural gas savings - Case Study

    It’s in the news every day; the natural gas production industry is experiencing record growth. The gas reserves in the United States are thought to hold enough natural gas for hundreds of years and the gas and oil industry has improved extraction techniques that make gas production more affordable and less impactful on the landscape. Good news for the country and our environment. The ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you