VOC control catalyst Articles

  • Minimizing Operating Costs in VOC Abatement Equipment

    Untitled Document As governmental regulations of environmental emissions become more restrictive, the average concentration of Volatile Organic Compounds (VOC's) has decreased as more ...

  • Case study - Catalytic oxidizer catalyst replacement

    Overview A New Jersey pharmaceutical company purchased a thermal incinerator to treat the heptane and hexane exhaust from their capsule wash system. The thermal incinerator"s "tubular" design was modified with a catalyst bed in order to reduce the system"s operational costs. Unfortunately, when operating in the catalytic mode, the oxidizer failed to provide the required ...

  • Common Treatment Technologies for Nonhalogenated VOCs

    Soil vapor extraction (SVE), thermal desorption, and incineration are the presumptive remedies for Superfund sites with nonhalogenated VOC-contaminated soil. Because a presumptive remedy is a technology that EPA believes, based upon its past experience, generally will be the most appropriate remedy for a specified type of site, the presumptive remedy approach will accelerate site-specific ...

  • Controlling Pharmaceutical Coating & Drying Process Emissions

    Capturing and destroying harmful emissions from pharmaceutical processes can be challenging. It’s not because the volatile organic compounds (VOCs) are difficult to destroy using catalytic or thermal techniques. It’s because their concentrations can be so high. These process streams raise safety concerns, both when they’re collected in vents and when they reach the final ...

  • Common Treatment Technologies for Halogenated VOCs in Air Emissions/ Off-Gases

    Three technologies that are most commonly used to treat halogenated VOCs in air emissions/off-gases are carbon adsorption, catalytic oxidation, and thermal oxidation. Carbon adsorption is a remediation technology in which pollutants are removed from air by physical adsorption onto the carbon grain. Carbon is 'activated' for this purpose by processing the carbon to create porous particles with a ...

  • Selected Literature from Johnson Matthey`s Environmental Catalysts and Technologies Division

    SSEC Literature: High Temperature SCR Zeolite Catalyst for NOx Control / SCR Catalyst for NOx Control Stationary Lean Burn Engines / SCR Systems for NOx Control Stationary Lean Burn Engines / Gas Turbine Oxidation Catalyst for the control of CO and VOCs / Oxidation Catalysts for the Control of CO, VOC, HC / BanditoTM - Modular Catalytic Converter for the Control of NOx, CO and THC / Band-ItTM - ...

  • Achieving Air Pollution Control with Catalytic or Thermal Oxidizers

    As the full effect of 1990’s Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many manufacturing operations have become subject to stricter local, state and federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground-level ozone (or smog). The CAA ...


    By The CMM Group, LLC

  • Air Pollution Control Specs

    As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...


    By The CMM Group, LLC

  • Honeycat cleans up VOC emissions from textile coating process - Case Study

    Product: Honeycat, Catalytic Oxidation System Application: Textile, Resin coating Customer: Permali, Ltd Site: Gloucester, UK Flowrate: 15,000, Nm3 hr-1 VOCs: Methyl,Cellosolve, Acetone, MEK & IMS Concentration: 0,to 8 ...


    By AirProtekt Limited

  • Understanding Air Pollution Control System Design Specifications

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many different companies will be required to install new or additional air pollution control equipment.  With well over twenty-five years of proven success in a variety of industries, thermal and catalytic oxidation has become a popular method for controlling volatile organic compound (VOC) ...


    By The CMM Group, LLC

  • Air Pollution Control in the Printing and Web Coating Industries

    For many U.S. companies in the printing and web coating business, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new.  In these industries, depending upon their location, companies have been installing APCS since the early 1970's.  However, for some companies the clock is still ticking regarding their compliance with local, state and federal ...


    By The CMM Group, LLC

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • Expert Interview: Pushing Air Pollution Control Technology Forward

    Catalytic Products International has a rich history of innovation and expertise in the field of air pollution control technology, as well as a goal of providing our customers with the knowledge that will help them meet their air pollution control needs. As part of our ongoing series of blogs in which we interview members of ...

  • Case study - Coating/hot foil stamping

    Location: New Jersey Equipment: Catalytic Recuperative Oxidizer 12,000 scfm capacity (1994 vintage) Installed: Fall 2003 Problem: Start-up company needed emission control with low capital and operating costs. Problem Details: The founders of this start-up had extensive experience with foil coating, as ...


    By Kono Kogs, Inc.

  • Identifying Your Ideal Air Pollution Control Technology, Scenario 3

    In our recent blog, "What's the Best Air Pollution Control Technology for My Process?",  we examined the many factors that can impact a facility's choice of air pollution control equipment. When they are ...

  • CPI Installs Catalytic Oxidizer at Pharmaceutical Mfg Company

    Catalytic Products International (CPI) recently completed the installation of a new VECTOR Series Catalytic Oxidizer (CatOx) at a Western USA manufacturer of pharmaceutical products for the abatement of Volatile Organic Compounds (VOCs).  ...

  • Air pollution regulations drive deployment of flexible abatement solutions - Case Study

    To address the growing complexity of air pollution regulations, which have to address a multi-tiered array of local authority, national and international requirements, AirProtekt of Cambridge is offering a total package air pollution service that embraces process assessment, project design, supply of the air pollution equipment, installation and commissioning. Modern Air pollution regulations ...


    By AirProtekt Limited

  • Case study - Bakery ethanol

    Overview A bread and bun bakery was faced with installing air pollution control equipment to control the volatile organic compounds (VOCs) emitted during their baking process. The local regulatory agency requires bakeries that generate over 25 tons of ethanol per year to reduce emissions by 95% by installing control devices on their ovens. The airstream that needed to be treated included ...

  • What`s the Best Air Pollution Control Technology for My Process?

    Air pollution control equipment is not something that business owners address by saying, “Let’s do the right thing for the environment and install an oxidizer!” In fact, the scenario is more likely to be “We need to increase productivity (always a good thing!), but that will put us over our annual emissions limits. Do we know what we will need? Where do we start? Who can ...

  • Case study - Printed circuit board emissions

    Overview One of the world's largest printed circuit board (PCB) manufacturers was required to install air pollution abatement equipment to control the VOCs emitted during their soldering ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you