VOC control equipment Articles

  • Control VOC`s in Refinery Wastewater

    Oil and water do not mix, like many of life’s one-liners this statement is basically true but not the whole story. Many hydrocarbon liquids, particularly aromatics, have significant solubilities in water: Benzene 1800 PPMVToluene 470Ethyl Benzene 150Xylenes 150 Petroleum refineries do not like salts in their feedstock since these corrode and foul process equipment. The first refining step is ...


    By AMCEC Inc.

  • Minimizing Operating Costs in VOC Abatement Equipment

    Untitled Document As governmental regulations of environmental emissions become more restrictive, the average concentration of Volatile Organic Compounds (VOC's) has decreased as more ...

  • Maintenance solutions for air pollution control equipment

    Manufacturing facilities are constantly under pressure to meet production forecasts at the lowest possible cost. These two goals; production output and cost control, can be difficult to obtain consistently in any manufacturing operation. Additional frustration to meet these goals can be exaggerated in today’s lean manufacturing climates that have trimmed budgets and reduced workforce. ...

  • Manufactured Gas Plant - Odor and VOC Control

    Products & Equipment Used: AC-645 Long Duration Foam AC-904 Long Duration Foam Pneumatic Foam Unit 400/25 Application Summary: Rusmar Long Duration Foam products have been used at numerous manufactured gas plant facilities. Often, tanks containing coal tar were filled with soil and other debris from the site before being ...


    By Rusmar Inc.

  • Hazardous Landfill Excavation - VOC Control, Vertical Surface

    Products & Equipment Used: Pneumatic Foam Unit 1600/40 AC-912 Long Duration Foam Application summary: Management at the Adams Center (IN) Commercial Hazardous Waste Landfill detected contaminants in their secondary leachate containment system, indicating a leak in the liner system. They decided to excavate the immediate area in order to ...


    By Rusmar Inc.

  • VOC Oxidizers: Where to begin?

    If you are wanting to solve a VOC (volatile organic compound) air pollution problem, how do you begin?  What type of solution is best suited for the application?  What are the various types of thermal oxidizers and how do they differ in design? RTO, Recuperative TO, Direct fired TO, carbon systems, or concentrators -- which should be used for an application in a chemical plant, refinery, an ...


    By Nacah Tech LLC

  • Solutions for Coating VOC & HAP Abatement

    Overview Our planet is getting warmer. At what rate it is occurring or how much human activity has to do with the increasing temperatures is a heated debate. One thing we do know for sure is that Carbon Dioxide (CO2) is a contributing factor in global warming and humans are responsible for a large portion of these emissions. These days, many individuals and businesses alike are trying to ...

  • Common Treatment Technologies for Nonhalogenated VOCs

    Soil vapor extraction (SVE), thermal desorption, and incineration are the presumptive remedies for Superfund sites with nonhalogenated VOC-contaminated soil. Because a presumptive remedy is a technology that EPA believes, based upon its past experience, generally will be the most appropriate remedy for a specified type of site, the presumptive remedy approach will accelerate site-specific ...

  • Silicone converter succeeds with custom air pollution control equipment - Case study

    Many industries utilize silicone as an ingredient in their manufactured product. Silicone enhances the attributes of the product or helps to improve production characteristics. Whatever the reason may be, users of solvent borne silicone's all face very troubling issues when it comes to the selection of the right air pollution control system. Among the air pollution control choices available to ...

  • Overview of Emission Control Technologies

    Chapter 8. Emission Control Technology 8.4 Thermal Oxidation 8.4.1 INTRODUCTION The objective of this section is to present various VOC thermal oxidation technologies, their strength and weaknesses and the elements required to determine what is the preferred technology for a given application. In 1970 the environmental authorities started to identify various industries which had ...

  • Controlling Pharmaceutical Coating & Drying Process Emissions

    Capturing and destroying harmful emissions from pharmaceutical processes can be challenging. It’s not because the volatile organic compounds (VOCs) are difficult to destroy using catalytic or thermal techniques. It’s because their concentrations can be so high. These process streams raise safety concerns, both when they’re collected in vents and when they reach the final ...

  • Metal Coating Emission Control

    The use of regenerative thermal oxidizers is expanding into applications where they wouldn’t have been considered years ago, says Mike Scholz As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking ...

  • Controlling Hazardous Air Emissions With A Catalytic Oxidizer

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment. With well over twenty years of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • Air Pollution Control Specs

    As the full effect of the federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With more than 25 years of proven success in a variety of industries, catalytic and thermal oxidation has become a popular method for controlling volatile organic compound (VOC) and hazardous air ...


    By The CMM Group, LLC

  • Achieving Air Pollution Control with Catalytic or Thermal Oxidizers

    As the full effect of 1990’s Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many manufacturing operations have become subject to stricter local, state and federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground-level ozone (or smog). The CAA ...


    By The CMM Group, LLC

  • Achieving Air Pollution Control With Catalytic Or Thermal Oxidizers

    As the full effect of the Federal Clean Air Act (CAA) Amendments passed by Congress in 1990 continue to impact today's industry, many manufacturing operations have become subject to stricter local, State and Federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground level ozone ...


    By The CMM Group, LLC

  • Modest Growth for Air Pollution Control Market

    The Clean Air Act amendments of 1990 created a wave of optimism in the air pollution control (APC) business. The subsequent decade, however, resulted in backwash of disappointment for APC companies as the market for stationary source equipment declined from 1-4% per year from 1993-1998. Growth returned to the APC market, however, with 1999 and 2000 characterized as 'good' years by the Institute ...

  • What`s the Best Air Pollution Control Technology for My Process?

    Air pollution control equipment is not something that business owners address by saying, “Let’s do the right thing for the environment and install an oxidizer!” In fact, the scenario is more likely to be “We need to increase productivity (always a good thing!), but that will put us over our annual emissions limits. Do we know what we will need? Where do we start? Who can ...

  • CO2 vs. VOC Sensors for IAQ - What`s the Difference

    People sometimes ask about the differences between VOC (Volatile Organic Compounds) sensors and CO2 sensors. While both can be used to measure indoor air quality (IAQ), these sensors are not interchangeable. They measure very different things. CO2 sensing technology by IR (infrared) is stable and is not subject to the short-term, random drift found in air quality sensors. Most IR carbon ...


    By CO2 Meter, Inc.

  • Air Pollution Control in the Flexographic Printing Industry

    A basic review of technologies used, and selection criteria to consider, to successfully control the VOC/HAP emissions exhausted from flexographic printing presses. Within the flexographic printing industry, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new. Today, because of business expansion, modifications to plant operations, or changes in ...


    By The CMM Group, LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you