voc gas dilution system Articles

  • Minimizing Operating Costs in VOC Abatement Equipment

    Untitled Document As governmental regulations of environmental emissions become more restrictive, the average concentration of Volatile Organic Compounds (VOC's) has decreased as more ...

  • The NILU tracer gas technique

    A tracer gas technique has been developed by the Norwegian Institute for Air Research (NILU) to study emission rates, dilution and diffusion of gases. The technique has been applied in several countries to quantify diffuse VOC leakages from refineries, petrochemical plants and oil production platforms.  The tracer gas techniqueThe dual tracer gas system developed by NILU has been applied in ...

  • Off-Gas Treatment Technologies for Soil Vapor Extraction Systems: State of the Practice

    Untitled Document EXECUTIVE SUMMARY This document provides state-of-the-practice information on off-gas treatment technologies for soil vapor extraction ...

  • Solvent Recovery System Keeps Presses Rolling at World`s Largest Gravure Printing Plant

    When QUAD/GRAPHICS Inc. entered the publication gravure printing market, it followed the axiom of Daniel Burnham, the 19th century architect and urban planner, to 'make no small plans.' In 1985, the Pewaukee, Wis.-based printing company purchased two 96-inch web, eight-color, high-speed presses and installed them at its new printing plant in Lomira, Wis., near Milwaukee. Conventional wisdom at ...

  • Case study - Pharmacuetical Company chooses the QUADRANT NRV Thermal Oxidizer

    Faced with meeting the needs of their Pharma Industry MACT Standards, one Fortune 100 Pharmaceutical Manufacturer called on Catalytic Products International, Inc. The challenge for Catalytic Products International was to design a system that was able to process the ultra-high LEL (high concentration of VOC’s) and deal with corrosive acids produced in the process off gas and the ...

  • Product Spotlight: Regenerative Thermal Oxidizer case study

    Oxidizer case histories in the pharmaceutical industry The pharmaceutical industry faces unique challenges in complying with environmental pollution and emission control regulations. Three pharmaceutical process case studies are examined: fluidized bed drying, tablet coating and reaction vessels, and batch operations. Recently, a contract drug manufacturing company faced violation ...

  • Controlling Pharmaceutical Coating & Drying Process Emissions

    Capturing and destroying harmful emissions from pharmaceutical processes can be challenging. It’s not because the volatile organic compounds (VOCs) are difficult to destroy using catalytic or thermal techniques. It’s because their concentrations can be so high. These process streams raise safety concerns, both when they’re collected in vents and when they reach the final ...

  • Clearing the air: the use of bio-oxidation for industrial air emissions control

    The wood products industry began rather ardous road to emissions control in the early 1990s with the first installation of a thermal oxidizer (an RTO) at a California MDF facility, for volatile organic compound (VOC) control. During the ensuing years, virtually every panel board facility has had to control emissions of VOCs, and up until the last few years, always with some sort of thermal ...


  • Case study - Petro-Chemical Processor meets National Emission Standards for Hazardous Air Pollutants

    A multitude of chemical and petroleum processing facilities across the country are now faced with having to meet new National Emission Standards for Miscellaneous Organic Chemical Manufacturing. One specific NESHAP is 40 CFR part 63, subpart FFFF. A facility must be a major source of HAP emissions Process units that: Produce organic chemicals that are not subject to other MACT ...

  • Petro-chemical processor meets national emission standards for hazardous air pollutants

    A multitude of chemical and petroleum processing facilities across the country are now faced with having to meet new National Emission Standards for Miscellaneous Organic Chemical Manufacturing. One specific NESHAP is 40 CFR part 63, subpart FFFF. The applicability of meeting this NESHAP is: A facility must be a major source of HAP emissions Process units that: Produce organic chemicals that are ...

  • Case study: MDI production plant

    Overview A major chemical manufacturer required a pollution control system to destroy 99.9% of the halogenated volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) emitted during the MDI manufacturing process. MDI is a chemical commodity used as a lightweight insulating material for ice chests and coolers as well as for sound and collision insulation in automobile ...

  • US EPA airmOzone TESTS

    The US EPA leads Photochemical Assessment Monitoring Stations programs (PAMS) for more than 15 years and many equipments used at PAMS sites are old and need to be replaced. That is why US EPA has conducted a material review of fully automatic GC units able to by analyze the 56 VOC ozone precursors of the PAMS list. They planned to perform an evaluation in two steps : - Laboratory evaluation of ...


    By Chromatotec Group

  • Cellulosic biofuel plant

    Cellulosic Biofuels meets National Emission Standards for Hazardous Air Pollutants A multitude of new cellulosic bio-fuel processing facilities across the country are now faced with having to meet new National Emission Standards for Miscellaneous Organic Chemical Manufacturing. One specific NESHAP is 40 CFR part 63, subpart FFFF. The applicability of meeting this NESHAP is: A facility must be a ...

  • Cellulosic biofuels meets national emission standards for hazardous air pollutants

    Cellulosic Biofuels meets National Emission Standards for Hazardous Air Pollutants A multitude of new cellulosic bio-fuel processing facilities across the country are now faced with having to meet new National Emission Standards for Miscellaneous Organic Chemical Manufacturing. One specific NESHAP is 40 CFR part 63, subpart FFFF. The applicability of meeting this NESHAP is: A facility must be a ...

  • EPA - China case study

    The first online air quality monitoring network for a 27 km2 industrial area The monitored area Situated south of Shanghai, in Zhejiang province Heavily industrialized area Main activity: fine chemicals 10 plants under surveillance, under the authority of the Chinese governmental agency for environmental protection (EPA) ...


    By Alpha MOS Environment

  • Case study - Reactor vent emission control

    OVERVIEW Many chemical and petroleum companies use batch reactors to make their products.  These reactors typically have vents which are opened and closed during emptying, filling, mixing, heating or cooling and other steps of the production process.  The gases coming from these vents must be controlled under most government regulations.  Generally speaking, the ...

  • Case study - Destruction of inert process emissions

    Many chemical companies use batch reactors to make their products.  These reactors typically have vents which are opened and closed during emptying, filling, mixing, heating or cooling and other steps of the production process.  The gases coming from these vents must be controlled under most government regulations.  Generally speaking, the emissions produced are inert (little or no ...

  • TVOC measurement for LEED/green building evaluation

    Total Volatile Organic Compounds (TVOC) may be evaluated when building designers/managers are pursuing the Leadership in Energy and Environmental Design Green Building Rating System for New Construction (LEED-NC) EQ Credit 3.2. The latest LEED-NC guidance document specifies that the maximum allowed concentration of TVOC measured in a building (post construction, pre-occupancy) is 500 µg/m3; the ...


  • How Can TO-15 Help You Solve Your Next IAQ Problem?

    Untitled Document Have you ever been asked to investigate unpleasant odors in a home or at the workplace? Are occupants developing headaches or a feeling of nausea? ...


    By EMSL Analytical, Inc.

  • Odor Control Advances at Composting Facility

    The Rockland County (New York) Cocomposting Facility began operations in February, 1999, processing biosolids from the five publicly owned treatment works (POTWs) in the county. The Rockland County Solid Waste Management Authority (RCSWMA) owns the facility, but contracted with Waste Management of New York to design, build and operate (DBO) the 110 wet tons/day agitated bin composting facility ...


    By BioCycle Magazine

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you