volatile organic compound thermal destruct Articles

  • Heat-enhanced bioremediation and destruction - Case Study

    Introduction In situ thermal treatment through Electrical Resistance Heating (ERH) is a proven robust technology for the treatment of volatile organic compound (VOC) source zones. ERH effectively treats the subsurface by volatilizing dense non-aqueous phase liquid (DNAPL) and VOCs, recovering the vapor, and treating the vapor by conventional technologies such as granular activated carbon ...


    By TRS Group, Inc.

  • Thermal Desorption

    Untitled Document Introduction: ...

  • Case study - Destruction of inert process emissions

    Many chemical companies use batch reactors to make their products.  These reactors typically have vents which are opened and closed during emptying, filling, mixing, heating or cooling and other steps of the production process.  The gases coming from these vents must be controlled under most government regulations.  Generally speaking, the emissions produced are inert (little or no ...

  • Regenerative Thermal Oxidizer

    PRINCIPLES OF COMBUSTIONThermal oxidation technology has proven to be industry choice for destroying Volatile Organic Compounds (VOCs). The process of combustion is the most commonly used method to control emission of organic compounds.  Combustion type systems are always simple systems capable of having very high destruction efficiency.  ...


    By Epcon Industrial Systems, LP

  • A Comprehensive Review Of Regenerative Thermal Oxidizers

    Within industry today, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new. In response to Congressional guidelines passed in the 1970’s, a number of companies with VOC emissions have been operating air pollution control systems of one type or another for 25 years or more. These guidelines have been revised and added to as the years progressed, making it ...


    By The CMM Group, LLC

  • Thermal deoilers - Thermal deoiling of evaporator coils for air conditioners

    The Problem A major Air Conditioning company was mandated to have an alternate technology for degreasing evaporator fins. They had, until recently, been deoiling metal parts in a conveyorized solvent based vapor degreasing line, but the state environmental agency mandated that the line be shut down on a certain date due to the excessive water and air pollution it generated. The company ...


    By Epcon Industrial Systems, LP

  • Thermal deoilers - Thermal deoiling replaces liquid based degreasing

    The Problem A major Automotive company was mandated to have an alternate technology for degreasing evaporator fins. They had, until recently, been deoiling metal parts in a conveyorized solvent based vapor degreasing line, but the state environmental agency mandated that the line be shut down on a certain date due to the excessive water and air pollution it generated. The company had ...


    By Epcon Industrial Systems, LP

  • Achieving Air Pollution Control with Catalytic or Thermal Oxidizers

    As the full effect of 1990’s Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many manufacturing operations have become subject to stricter local, state and federal clean air regulations. Both VOC (volatile organic compound) and HAP (hazardous air pollutant) emissions are strictly regulated since they lead to the formation of ground-level ozone (or smog). The CAA ...


    By The CMM Group, LLC

  • Product Spotlight: Regenerative Thermal Oxidizer case study

    Oxidizer case histories in the pharmaceutical industry The pharmaceutical industry faces unique challenges in complying with environmental pollution and emission control regulations. Three pharmaceutical process case studies are examined: fluidized bed drying, tablet coating and reaction vessels, and batch operations. Recently, a contract drug manufacturing company faced violation ...

  • Regenerative Thermal Oxidizers…What You Should Know.

    Within industry today, the use of an Air Pollution Control System (APCS) to control harmful air pollutants is not new.  In response to Congressional guidelines passed in the 1970’s, a number of companies with VOC emissions have been operating air pollution control systems of one type or another for 25 years or more.  These guidelines have been revised and added to as the years ...


    By The CMM Group, LLC

  • Air Pollution Control Using Catalytic, Regenerative or Recuperative Systems

    For companies in a variety of industries, the clock is ticking regarding their compliance with local, state and federal clean air requirements. The need to provide adequate emission controls still looms on the horizon as these companies explore the various equipment and technology options available to them. While the guidelines regarding air pollution control are consistent by industry, a ...


    By The CMM Group, LLC

  • Tacoma, WA - ESTCP Fort Lewis heat enhanced bio - Case Study

    Heat Enhanced Bioremediation and Destruction Introduction In situ thermal treatment through Electrical Resistance Heating (ERH) is a proven robust technology for the treatment of volatile organic compound (VOC) source zones. ERH effectively treats the subsurface by volatilizing dense non-aqueous phase liquid (DNAPL) and VOCs, recovering the vapor, and ...


    By TRS Group, Inc.

  • Total Enclosures Capture 100% of a Facility`s Air Pollution

    Over the past decade the use of total enclosures to demonstrate and/or maintain capture of printing press emissions has become very popular within both the flexographic and rotogravure printing industries.  Operating a printing press within a properly designed and approved total enclosure assures virtually 100% capture of the volatile organic compounds (VOCs) and/or hazardous air pollutants ...


    By The CMM Group, LLC

  • Hi Tech company selects PSSI oxidizer - innovative solar panel manufacturer selects PSSI recuperative catalytic oxidizer

    Background PSSI was initially contacted to provide an innovative company with support to determine which air pollution control technology was most appropriate for their new product line used in the production of solar panels.  The product had been under development for many years and was now ready for commercial manufacturing.  PSSI worked closely with the company to understand their processes ...


    By Pollution Systems

  • Cost-Effective Activated Carbon Adsorption System Addresses VOC Emissions for Circuit Board Manufacturer

    PHOTOCIRCUITS manufactures printed circuit boards, primarily for automotive use in motor vehicle dashboards and personal computers with manufacturing facilities in Glen Cove, NY and Peachtree City, GA.  Photocircuits is the largest industrial company in Glen Cove and one of the largest manufacturers of printed circuit boards. As its facilities and output grew, Photocircuits continued its ...


  • Case study - Stainless steel RTOs for ethanol emissions and odors

    Overview A 42 million gallon expansion at an ethanol production plant in Nebraska was certain to put the dry mill out of emission compliance for Hazardous Air Pollutants (HAPs), Volatile Organic Compounds (VOCs), carbon monoxide (CO), nitrogen oxides (NOx), and particulate matter (PM), all regulated by the EPA. Ethanol production facilities in the United States are permitted to operate ...

  • Off-Gas Treatment Technologies for Soil Vapor Extraction Systems: State of the Practice

    Untitled Document EXECUTIVE SUMMARY This document provides state-of-the-practice information on off-gas treatment technologies for soil vapor extraction ...

  • Clearing the air: the use of bio-oxidation for industrial air emissions control

    The wood products industry began rather ardous road to emissions control in the early 1990s with the first installation of a thermal oxidizer (an RTO) at a California MDF facility, for volatile organic compound (VOC) control. During the ensuing years, virtually every panel board facility has had to control emissions of VOCs, and up until the last few years, always with some sort of thermal ...


  • Case study - Plastic components painting

    Overview A plastic injection molding company in Wisconsin is known as a world-class leader in the industry for their secondary decorating and assembly capabilities. One of their eleven facilities not only performs plastic injection molding but also provides the organization with decorating capabilities such as painting, laser etching, laser marking, pad printing and assembly of ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you