wall-mounted water sampler Articles

  • McClellan AFB comparison of 6 no-purge groundwater samplers

    This report describes the activities and results of a field demonstration of six different diffusion and grab groundwater sampling devices at the former McClellan Air Force Base (McClellan), located in Sacramento, California. Analytical results from these samplers are compared to ‘baseline’ analytical results from samples collected using conventional (low-flow and three-casing-volume purge) ...


    By EON Products Inc.

  • A new no-purge, non-displacement groundwater sampler

    What Is It? The HydraSleeve sampler is designed to collect representative water samples from monitoring wells without purging. The disposable sampler collects a discreet sample from only the 'fresh formation' water in the screened interval of the well. It is fast, inexpensive, simple to use, generates no purge water and collects a sample suitable for all analytical parameters. Why It Works The ...


    By EON Products Inc.

  • LIMS and the Automation of the Water Lab

    (Reproduced by permission from Laboratorium Magazine) Europe’s most modern water lab is located in Leeuwarden, in the Netherlands. Vitens made a big splash when it brought this modern building, with its transparent design, into operation in January 2005. Many colleagues from Dutch and foreign labs are eager to visit this installation, where water control samples are routed automatically with the ...


    By STARLIMS Corporation

  • Low-Flow (Minimal Drawdown) Ground-Water Sampling Procedures

    Untitled Document Background The Regional Superfund Ground Water Forum is a group of ground-water ...


    By Solinst Canada Ltd.

  • Fast, Sensitive, and Cost-effective ICPE Spectrometry Analysis of Trace Metals in Water by EPA Method 200.7

    Introduction The Shimadzu ICPE-9820 multi-type ICP atomic emission spectrometer is the ideal instrument for running EPA Method 200.7. The ICPE-9820 permits simultaneous analysis of all elements, at all wavelengths, allowing high-throughput analysis with little need for dilution. The large 1-inch CCD detector with over 1 million pixels measures 110,000 wavelengths. Overflow channels ...

  • Strengthening the Weakest Link

    A leading international wastewater instrumentation manufacturer is now using peristaltic pumps from Verderflex as part of the wastewater sampler systems it manufactures. The pumps provide reliable and accurate performance which helps the Hydrocell sampler systems produced by Halifax-based Smart Storm to measure the volume and toxicity of wastewater effluent. As a leading provider of water ...


    By Modern Pumping Today

  • Ambient Air Sampling Methods

    Pollutants are nothing but any substance that may present in an atmosphere in such a concentration that it may harmful to surrounding, living organism or human being. Sampling and analysis of air pollutants is known as Air quality monitoring and it is major part of environmental monitoring. There are many advanced types of ambient air Sampling methods. we will learn here only which are most ...


    By Perfect Pollucon Services

  • Standard Chlorine of Delaware Remediation

    By designing a 70-foot deep barrier wall, Black & Veatch was able to cut off contaminant source areas from a creek near New Castle, Delaware. The groundwater treatment system that Black & Veatch designed prevents site contamination from reaching the underlying drinking water aquifer. The Standard Chlorine of Delaware Site is a 65 acre area including an abandoned chlorobenzene ...


    By Black & Veatch Corporation

  • Stormwater Solids Reduction for NPDES Permits

    Finally obtaining a National Pollution Discharge Elimination System (NPDES) Permit is often a relief but is by far not the end of the story. Meeting the requirements of that permit often proves to be quite difficult and stiff fines are freely doled out to those who fail to meet regulatory limits. For one Midwest jet propulsion manufacturing facility, the issue of total daily solids discharge ...

  • Sick-building syndrome and building-related illness

    Significant health problems linked to very poor indoor air qualityIndoor Air Quality (IAQ) deals with the content of interior air that could affect health and comfort of building occupants. The IAQ may be compromised by microbial contaminants (mold, bacteria), chemicals (such as carbon monoxide, radon), allergens, or any mass or energy stressor are more prevalent than anyone could have predicted. ...

  • IAQ investigators often overlook Bacteria as the Root Cause of Occupant Complaints

    Untitled Document Many investigators have been dealing with mold issues the last few years and may have been overlooking bacteria as the underlying microbial problem. Bacteria ...


    By EMSL Analytical, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you