waste bale Articles

  • Paper resizing for baling

    The Wesendrup-AVU-Recycling GmbH & Co., Wetter/Germany, operate a processing plant for waste paper where residual substances from newspaper facilities and companies in the paper-converting industry are pressed into uniform bales and conditioned for the further processing. The heart and essential item of this ultra-modern processing plant is the single-rotor shredder type WLK 18 Super-Jumbo of ...


  • Baling Machines – Vertical Balers

    Baling machines are used by manufacturers / industry the world over to handle recyclable waste (this is the main difference between a baling machine and a trash compactor – a baler is for recyclables, and a compactor is for trash.) To meet the needs of various industries, two basic baling machine designs are generally used – horizontal balers, and vertical balers. In this article, we’ll give a ...


    By SINOBALER

  • Baling saves time and makes money

    Somerset West is situated approximately 50 km east of Cape Town in South Africa. The town has 30,000 inhabitants, some of which shop at one of the town’s SPAR supermarkets, where more than 700 customers fill their baskets with groceries every day. As a result, the supermarket generates ca. 100-130 kg. of cardboard, paper and plastic waste a day and until recently, handling it all was ...


    By Bramidan Balers

  • Baling of RDF/SRF - Case Study

    Refuse Derived Fuel (RDF) and Solid Recovered Fuel (SRF) plants are common in Europe to meet the European demands for sustainable waste handling. RDF/SRF process facilities combined with the Flexus Balasystem round baling system is the best solution to efficiently store and transport the generated RDF/SRF. The material is compressed and wrapped into easily handled round bales, that can be stored ...


    By Flexus Balasystem AB

  • Baling machines increasingly becoming an important part of industry

    Baling machines have taken on an increased role as the business world moves towards a more environmentally-friendly way of doing things, and “recycling” becomes the norm. In short, materials that were once waste in decades past are now reusable. In addition to such, recyclable materials carry a definitive dollar value, making the efficient handling of these materials increasingly important. ...


    By SINOBALER

  • The economic solution for baling large and bulky materials

    Easy baling of extra large cardboard ...


    By HSM GmbH + Co. KG

  • Easy baling of extra large cardboard - Case Study

    Whenever genuine spare parts are needed for the vehicles made by large automobile manufacturers, the Rudolph Logistik Group in Baunatal, near Kassel/Germany, ensures they are available. Their spare parts logistics is an ingenious operation! This is now also true of the way they deal with the huge amount of waste cardboard generated. The contract logistics specialists found an optimal disposal ...


    By HSM GmbH + Co. KG

  • What a waste!

    Having worked on putting into place effective waste management systems in the middle of the Sahara desert, once again I am left in despair at poor precedents in the UK.I did the Great North Run this year, and was amazed at the amount of rubbish that was left for the local council to collect. I also attended the RWM waste and recycling show in Birmingham to promote zero waste, and how to achieve ...


    By Ive Design

  • Turning metal wires from pulp bales into profit with TANA Shark

    Metal wires from paper pulp bales are high in value but very hard to shred and clean for selling purposes. Usually the metal wires are stuck with plastics and some remains of the pulping process. This particular type of waste is almost impossible to separate, says a landfill operator in France. Normally the only possibility to handle this type of waste is to dump it at a landfill. This is due ...


    By Tana Oy

  • Tackling waste in the sands of the Sahara

    When gas was discovered in the mid Sahara areas of North Africa in the 1990s Andy Ive was asked by BP to help set up the water and waste infrastructure for what amounted to four small towns 600 km into the desert. No local infrastructure at all existed for the waste and water to be produced by 2-3000 workers. IVE overcame sandstorms, extreme heat, poisonous snakes and patented a novel solution to ...


    By Ive Design

  • HSM vertical baling press provides order and cleanliness at the ROBINSON Club Daidalos on the island of Kos - Case Study

    The ROBINSON Club DAIDALOS on the Greek island of Kos is a magical location. Regardless of whether you are looking out from the balcony of a room or from the bar: the view of the Aegean Sea and the offshore islands puts hotel guests under a spell at any time of day. The hospitality of the staff and the unbelievably great sports and leisure activities make this club unique. Of course, guests know ...


    By HSM GmbH + Co. KG

  • Waste paper handling – chuck the gaylord

    THE NICEST thing about Gaylord boxes...well, there are many. They cost next to nothing. Relative to the other beasts in your shop, they take up hardly any room. You don’t have to plug them in, so they don’t boost your electric bill. Yes, it’s high time the Gaylord got its due. Besides, in an economy like the one we’re still experiencing—and considering the George Washington hand-holding that’s ...


  • Case Notes: Resources, recycling and waste

    The regulation of waste is a notoriously complex and confusing area of environmental law.1 Even pinning down the precise meaning of waste under the Waste Framework Directive2 continues to prove difficult, and the mass of litigation and commentary to which this most basic question has given rise is well known. The decision of the European Court of Justice (ECJ) in Mayer Parry, a reference from the ...


  • Energy efficient waste disposal solution - Case Study

    Piled higher It’s 6.20 metres high, weighs 40 tonnes and has a pressing power of 1,200 kilonewton (kN): the fully automated VK 12018 R channel baling press from HSM in Frickingen for pressing paper, cardboard and cardboard boxes has been in use by the disposal company SITA in Hochheim for around three months. There are fewer bales thanks to the enormous pressing pressure and the large ...


    By HSM GmbH + Co. KG

  • Selecting the Right Baler for Solid Waste Management

    Balers are equipment which helps in managing solid waste effectively. What balers do is basically compress the solid waste into bales so that the solid waste can be effectively stored, managed and transported. Besides cutting down the cost of waste collection, management and transportation, balers also save you lot of time. There are various types of ...

  • Waste Transfer Station Odours - Case Study

    Application Greenstar Ltd. who operate the large waste transfer station at Ballyogan needed to ensure working conditions inside the building were acceptable to the workforce and that the surrounding area did not suffer from odourous emissions. An early part of the design process called for an efficient extraction system to draw air from the Reception Hall and the Baling Hall to meet these ...

  • Cutting hazardous waste costs and liability case study

    The AH-64A Apache Combat helicopter, a prominent fixture in Operation Desert Storm, is manufactured by McDonnell Douglas Helicopter Systems of Mesa, Arizona, using the latest and most technologically advanced methods and techniques. However, outdated technology and equipment were being used in the management and minimization of the company's hazardous waste. The manufacturing processes at the ...


    By Waste Control Systems Inc

  • New shredder boosts BPR’s destruction of confidential waste

    Waste management experts BPR Group has invested in a leading-edge shredder to improve the scope and security of its confidential paper destruction service. The company has installed the renowned UNTHA RS100 shredder at its Rainham facility in Greater London, enabling BPR to bring its shredding operation in-house rather than contract it out to a third party. BPR is now generating revenues of more ...


    By UNTHA UK LTD

  • Reliable production support and fully automatic waste disposal - Case Study

    GWP Packaging is part of GWP Group Ltd, one of the leading and most versatile providers of packaging solutions in Great Britain. Customerspecific product and transport packaging made of corrugated cardboard is developed and produced in its sphere of business. Innovative thinking is the central factor behind the work of the packaging specialist from Cricklade, Wiltshire. The most recent ...


    By HSM GmbH + Co. KG

  • Introducing Riverside`s newest horizontal waste baler - the HZ50T

    As interest in Riverside Waste Machinery's newest waste baler heats up, managing director Jonathan Oldfield tells us a little more about this latest addition to the fleet... Q: What is your product/technology? Riverside Waste Machinery’s RWM HZ 50T semi-automatic horizontal baler. Q: How does it work? When materials are fed into the hopper, ...


    By Riverside Waste Machinery

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you