waste battery metal Articles

  • Heavy Metals in Waste

    Untitled Document Summary and discussion The aim of this report has been to demonstrate the existing knowledge regardng the harmful effects of heavy metals, the ...

  • Leak Detector Lithium Ion Battery

    Lithium ion batteries have been in the news quite a lot recently, and not all of it has been positive. There have been numerous incidents of different products from airplanes to hoverboards to mobile phones catching fire during charging or operation.  These problems occur when there has been damage to the cells’ structure or to the protective circuit.  The protective circuit ...


    By Restek Corporation

  • Foundry by products and casting waste

    There are lots of waste elements generated by the casting process, creating a waste stream that requires specific handling in order to minimise the risk of land contamination, both through the handling process and the storage and disposal of raw materials ...


    By Inciner8 Limited

  • UE: risk of shortage for 8 rare earth metals

    In a report published on November 4th, the European Joint Research Centre (JRC) has warned of the "risk of shortage" in 2020-2030 of eight strategic metals used in low carbon energy technologies identified in the European SET Plan adopted in 2008. This report continues the work done in a previous study of the JRC from 2011. It is also based on the scenarios presented in 2011 in the roadmap of ...


    By Stanford Magnets

  • Toxins Found in E-Waste

    One of the worst effects of a skyrocketing, global e-waste crisis is the risk of toxic contamination for the environment and communities. In fact, delving into the many chemical and heavy metal materials that make up most electronic devices, it seems that toxins and electronics go hand in hand. Though many manufacturers of electronic devices are finding innovative ways to work around toxins found ...

  • Europe ‘s E-waste Failure – Only a Third of Electronic Waste Managed Correctly

    Mismanagement of discarded electronics within Europe involves a volume 10 times that of e-waste shipped to foreign shores in undocumented exports, according to a comprehensive 2-year investigation into the functioning of the used and waste electronics market. The European Union-funded project, Countering WEEE (waste electrical and electronic equipment) Illegal Trade (CWIT), was undertaken by ...


    By GLOBE SERIES

  • Dioxines and furanes - Case Study

    Example: Scrap copper recycling, cobalt for battery production Similar tasks: Metal recycling, roast processes, thermal waste disposal When recycling metals - as in scrap copper recycling (mostly cable material) - toxic waste gases often occur. The raw materials to be recycled are injected in a shaft kiln that emits dust, organic contaminants, carbon monoxide, dioxins as well as furans. A ...

  • Case study - Saubermacher – Austria - Processing plant for waste electrical and electronic equipment (WEEE)

    Customer Founded in the 1979 as a small family- owned company, Saubermacher has developed into a group with around 3,800 employees and 75 locations with holdings in Austria, Slovenia, Hungary, the Czech Republic and Romania. On 10th November 2010, the ecycling- park in Unterpremstätten was taken into operation, as the first electro-waste processing plant in the ...

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that were once abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain subs tances ...


    By Oil Skimmers, Inc.

  • Assessment of Zn, Cu, Pb and Ni contamination in wetland soils and plants in the lake basin

    The impact of waste disposal on trace metal contamination was investigated in eleven wetlands in the Lake Victoria Basin. Samples of soil, water and plants were analysed for total Zn, Cu, Pb and Ni concentrations using flame atomic absorption spectrophotometry. The trace metal concentrations in soil were the highest in Katanga wetland with the highest mean concentrations of 387.5±86.5 mg/kg Zn, ...

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that once were abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain substances ...


    By Oil Skimmers, Inc.

  • Is it time to recycle more nickel?

    Now you might think me a little sad, but I have to confess that as a metallurgist, I always find it interesting just how closely the history of mankind is linked to advances in metal working. The first evidence of metal working in Europe dates from around 5500 BC with the extraction of copper, lead and precious metals and this was followed by the working of bronze from around 4000 BC, both of ...

  • Lead and Polypropylene Materials from Car Batteries - Case Study

    Recycling areas: Various scrap Company name: MPI Recycling (MPI Reciklaža Metalurgija, plastika inženiring d.o.o.) Located: Črna na Koroškem, Slovenia Founded: 1990 Employees: 86 TAB is a Slovenian producer of lead acid flooded, VRLA AGM and VRLA Gel ...


    By Eldan Recycling A/S

  • The Newton, IA Landfill: A Smooth Operation

    The Newton, IA landfill sta rted out as an old strip mine in 1945. When it first was created, trash was dumped at the site and whenever it was needed, the garbage was set on fire and pushed into the old strip mine. As the rules have changed throughout the years, the dump was transitioned into a sanitary landfill in the late 1960s. However, at that time the trash would still pile up and would not ...


    By Waste Advantage Magazine

  • We Created the Technosphere, but is it the Birth Place of the Circular Economy

    Human activity has created the ‘technosphere’, a landscape which is composed of the materials we have developed, created and thrown away. Far from being a miserable landscape that may initially come to mind, like the desolate garbage filled scene in WALL-E, it could actually be the basis on which we can create a more sustainable way of managing our resources. Just like we have ...

  • Using a direct method to characterize and measure flows of municipal solid waste in the United States

    ABSTRACTAlthough there are a myriad of sources of municipal solid waste (MSW) data in the United States, much of thesedata are not transparent and are also extremely difficult to find. In addition, the two major methods of quantifyingnational MSW flows—the BioCycle State of Garbage in America and the U.S. Environmental Protection Agency (EPA)/Franklin Associates’ MSW “Facts and Figures” ...

  • How can lead be so crucial, but also so toxic?

    Why is everyone talking about lead? Not long ago, like so many historic buildings in the UK, a local parish church near to where I live had the lead stolen from its roof.  Sadly, this is not so unusual and all the more distressing in this case, both because it holds special memories as the church where my wife and I were married, and also because the lead was stolen during heavy ...

  • Lead and Zinc Smelting Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Properties and Behavior of Inorganics in Contaminated Soil

    Often, specific technologies may be ruled out, or the list of potential technologies may be immediately narrowed, on the basis of the presence or absence of one or more of the chemical groups. The relative amounts of each may tend to favor certain technologies. Metals may be found in the elemental form, but more often they are found as salts mixed in the soil. At the present time, treatment ...

  • Common Treatment Technologies for Inorganics in Soil, Sediment, and Sludge

    The most commonly used treatment technologies for inorganics in soil, sediment, and sludge include solidification/stabilization (S/S), excavation and off-site disposal, and acid extraction. These treatment technologies are described briefly below. Solidification processes produce monolithic blocks of waste with high structural integrity. The contaminants do not necessarily interact chemically ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you