waste combustion Articles

  • Combustion Of Heavy Fuels And Liquid Wastes

    This paper describes the design and operating conditions of liquid and gas combustors for heavy fuels and liquid wastes. Lower fuel prices can be achieved by switching from light oil to heavy ones, or combining with unconventional waste fuels. Unconventional waste fuels such as energetic off gases and organic liquid waste require especially designed combustion equipment like a special combustor ...

  • Recovery Of Metals Using Combustion

    Process industries generate a number of hazardous waste streams containing metals bound with organic components. These metals can be quite valuable if they can be separated from the organic components and recovered. Four projects are discussed. ...

  • Low emission combustion of Oilgas

    Type     HOFGAS®- IFM4c/2300/150 Commissioning     June 2001 Site     Cistierna (ES) Situation Enervisa SA in Cistierna own a plant for the recycling of old oils. The oil is evaporated and condensed into high-grade fuel. The reclaimed fuel is used in diesel engines for production of electricity as well as in burners for the ...


    By Hofstetter BV

  • Waste to energy – processing waste with a high thermal value to substitute combustibles

    With the taking effect of the TASi (Technical Regulations on Estate Waste) in 2005, non-treated waste must no longer be disposed of and deposited. Commercial and industrial residues with a high thermal value such as rejects from paper industry, punchings from rubber and plastics, and other mono-fractions which are characterized by homogeneity and constant combustible properties through mechanical ...


  • Understanding the dangers of combustible dust

    Paper shredding is growing into a big business. Recycling and the green movement certainly planted the seeds, but regulators have added the fertilizer. Industry-changing laws have been passed to govern document security in accounting, healthcare and banking, and shredders of many varieties are becoming the tools of those trades.Five or six years ago Warde Comeaux knew only a few people who ...

  • Compatibility of Compacted Soils with Municipal Waste Combustion Ash Leachates

    Hydraulic conductivity values for three compacted soils were used as indices of compatibility of the soils with two municipal waste combustion (MWC) ash leachates. Specimens of the three soils were compacted to 90% of proctor compaction (ASTM D 693) in double-ring permeameters and permeated first with water (0.005 N CaSO4) and then with MWC ash leachate. The hydraulic conductivity values of the ...


    By ASTM International

  • Two-Stage Combustion of High-PVC Solid Waste With HCL Recovery

    Untitled Document Abstract A waste-to-energy process based on high-PVC solid wastes is discussed. The basis is that at 200-400°C the PVC fraction decomposes ...

  • Size reduction of substitute combustibles (RDF)

    The new pilot installation of SITA Wiebe GmbH, Bielefeld/Germany, processes highly calorific commercial and industrial waste to become quality-assured substitute combustibles for cement industry and/or power plants. Basic items of this ultra-modern processing installation are two one-shaft size reduction machines of type WLK 30 Super-Jumbo of WEIMA Maschinenbau GmbH, Ilsfeld. The total output of ...


  • Horizontal Mixers for Secondary Combustibles - Case Study

    The manufacture of secondary combustibles from household waste, industrial waste and special waste in accordance with statutory requirements is to be a huge challenge for system suppliers in the coming years. Currently, at times, extremely differing substances are treated in such a way that they can be loaded into conventional furnaces. The most important requirement is the detailed control over ...


    By AVA GmbH u. Co. KG

  • Why high temperature combustion of landfill gas?

    Due to the accumulation of knowledge and the tightening of environmental law, the landfill technology has increasingly become concerned with the management of trace compounds in landfill gas. With landfill gas, contamination is through sulphur, chlorine, fluorine, halogenated hydrocarbons and heavy metals. Other trace elements such as volatile organic compounds (VOC), impose environmental ...


    By Hofstetter BV

  • Corrosion Problems Arisen from the Use of Alternative Combustibles

    Introduction Metal Corrosion has been a subject of growing important in cement furnaces during the past few years. This development is mainly a result of the tendency to use alternative fuels with ...


    By Castolin Eutectic

  • Variables Affecting Emissions of PCDD/Fs from Uncontrolled Combustion of Household Waste in Barrels

    ABSTRACT The uncontrolled burning of household waste in barrels has recently been implicated as a major source of airborne emissions of polychlorinated dibenzo-p-dioxins and polychlorinated ...


    By Arcadis

  • Gaseous emissions during concurrent combustion of biomass and non-recyclable municipal solid waste

    Abstract Background: Biomass and municipal solid waste offer sustainable sources of energy; for example to meet heat and electricity demand in the form of combined cooling, heat and power. Combustion of biomass has a lesser impact than solid fossil fuels (e.g. coal) upon gas pollutant emissions, whilst energy recovery from municipal solid waste is a beneficial component of an integrated, ...


    By Protea Limited

  • Remediation of Abandoned Coal Mines Using Coal Combustion Products

    A slurry of mine water and coal combustion fluidized bed ash (FBA) was injected into an abandoned coal mine in Eastern Oklahoma in July 1997. Oil-field technology was used to inject 1.8 Gg (418 tons) of FBA through five wells in 15 hours. Alkaline minerals in the FBA neutralized acidity and imparted alkalinity to the mine water. Thus, this remediation method uses the waste from an industrial ...


  • EPA proposes revisions to GHG mandatory reporting rule for stationary combustion sources

    This summer, EPA proposed several updates and amendments to the GHG Mandatory Reporting Rule (40 CFR Part 98). This activity is consistent with EPA’s stated intention to issue amendments and re-propose subparts (i.e., those subparts that were initially reserved upon finalization of the rule last October) by the end of 2010. EPA’s published revisions in the Federal Register on June 15, ...


    By Trinity Consultants

  • Introducing LaserGas III SP CO – a combustion analyzer for rough environments

    NEO Monitors unveils the industry’s most compact CO combustion analyzer suitable for the most demanding environments. LaserGas III CO includes measurement of CH4, H2O and temperature in one single unit designed to reduce risk. Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is ...


    By NEO Monitors AS

  • Municipal waste management & handling

    Several MSW management practices, such as source reduction, recycling, and composting, prevent or divert materials from the wastestream. Source reduction involves altering the design, manufacture, or use of products and materials to reduce the amount and toxicity of what gets thrown away. Recycling diverts items, such as paper, glass, plastic, and metals, from the wastestream. These materials are ...


    By Jindal power ltd.

  • Defining solid waste

    Simultaneous to the publication of the final National Emission Standards for Hazardous Air Pollutants for Boilers (the Boiler NESHAP) and the Commercial and Industrial Solid Waste Incinerator (CISWI) Rules, EPA issued a new regulation that for the first time defines what materials are a non-hazardous solid waste when combusted. This rule, Solid Wastes Used as Fuels or Ingredients in Combustion ...


    By Trinity Consultants

  • Waste-to-energy in Indonesia

    Brief description on Waste-to-energy technologies and particular equipment that the company has designed and manufactured. CV Wirajasa Teknik Industri is offering Waste Oil Burner and Biomass Combustion to replace conventional burners that utilize fossil fuel such as natural oil, synthetic lubricating oil, Biomass Combustion Chambers can be applied in sereal and nut drying, organic fertilizers ...


    By CV Wirajasa Teknik Industri

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you