waste combustion system Articles

  • 10 Reasons why you should continuously monitor low temperature and liquid chemical sterilants for worker safety

    1. Sterilant chemicals are highly toxic Low temperature and liquid chemical sterilants are designed to kill all microorganisms including resistant spores and if they were not toxic, they would not be effective in sufficiently high concentration to destroy all microbial life including the chemically resistant sporicidal forms of certain ...


    By ChemDAQ, Inc.

  • Understanding the dangers of combustible dust

    Paper shredding is growing into a big business. Recycling and the green movement certainly planted the seeds, but regulators have added the fertilizer. Industry-changing laws have been passed to govern document security in accounting, healthcare and banking, and shredders of many varieties are becoming the tools of those trades.Five or six years ago Warde Comeaux knew only a few people who ...

  • Two-Stage Combustion of High-PVC Solid Waste With HCL Recovery

    Untitled Document Abstract A waste-to-energy process based on high-PVC solid wastes is discussed. The basis is that at 200-400°C the PVC fraction decomposes ...

  • Size reduction of substitute combustibles (RDF)

    The new pilot installation of SITA Wiebe GmbH, Bielefeld/Germany, processes highly calorific commercial and industrial waste to become quality-assured substitute combustibles for cement industry and/or power plants. Basic items of this ultra-modern processing installation are two one-shaft size reduction machines of type WLK 30 Super-Jumbo of WEIMA Maschinenbau GmbH, Ilsfeld. The total output of ...


  • Horizontal Mixers for Secondary Combustibles - Case Study

    The manufacture of secondary combustibles from household waste, industrial waste and special waste in accordance with statutory requirements is to be a huge challenge for system suppliers in the coming years. Currently, at times, extremely differing substances are treated in such a way that they can be loaded into conventional furnaces. The most important requirement is the detailed control over ...


    By AVA - Huep GmbH u. Co. KG

  • Corrosion Problems Arisen from the Use of Alternative Combustibles

    Introduction Metal Corrosion has been a subject of growing important in cement furnaces during the past few years. This development is mainly a result of the tendency to use alternative fuels with ...


    By Castolin Eutectic

  • Why high temperature combustion of landfill gas?

    Due to the accumulation of knowledge and the tightening of environmental law, the landfill technology has increasingly become concerned with the management of trace compounds in landfill gas. With landfill gas, contamination is through sulphur, chlorine, fluorine, halogenated hydrocarbons and heavy metals. Other trace elements such as volatile organic compounds (VOC), impose environmental ...


    By Hofstetter BV

  • Introducing LaserGas III SP CO – a combustion analyzer for rough environments

    NEO Monitors unveils the industry’s most compact CO combustion analyzer suitable for the most demanding environments. LaserGas III CO includes measurement of CH4, H2O and temperature in one single unit designed to reduce risk. Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is ...


    By NEO Monitors AS

  • STEP - System for Solid and Liquid Waste Put to the Test

    Wendy Laursen details the System for Environmental Protection (STEP) system which is being installed inside a twenty-foot ISO container to be trialled onbard the Canadian Coast Guard vessel, Pierre Radisson.   The STEP container houses Terragon's single-drum Micro-Auto Gasifciation System (MAGS) and Wastewater Electrochemical Treatment Technology (WETT).  MAGS aims to ...

  • Case study - Internal combustion engines and process heat-to-power application in Czech Republic

    Breclav-Postorna, Czech Republic Hot Water Temp:  88-92°C Hot Water Flow:  10 l/s KWth Average (Thermal Input): 600-750kWth Cooling:  Cooling Tower Cold Water Temp: 18-24°C Cold Water Flow: 12-14 l/s Green Machine Gross Output: Two machines at 25-33kWe each ElectraTherm installed two Green Machines at FOSFA, a manufacturer of phosphoric acid and ...


    By ElectraTherm

  • Municipal waste management & handling

    Several MSW management practices, such as source reduction, recycling, and composting, prevent or divert materials from the wastestream. Source reduction involves altering the design, manufacture, or use of products and materials to reduce the amount and toxicity of what gets thrown away. Recycling diverts items, such as paper, glass, plastic, and metals, from the wastestream. These materials are ...


    By Jindal power ltd.

  • Defining solid waste

    Simultaneous to the publication of the final National Emission Standards for Hazardous Air Pollutants for Boilers (the Boiler NESHAP) and the Commercial and Industrial Solid Waste Incinerator (CISWI) Rules, EPA issued a new regulation that for the first time defines what materials are a non-hazardous solid waste when combusted. This rule, Solid Wastes Used as Fuels or Ingredients in Combustion ...


    By Trinity Consultants

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Plasma Arc Waste Destruction System (PAWDS) - A novel approach to waste elimination aboard ships

    The Plasma Arc Waste Destruction System (PAWDS) uses plasma energy, with temperatures over 5,000 oC, to rapidly and efficiently destroy combustible waste aboard ships. PAWDS has proven itself to be a viable alternative to traditional incinerators. In September 2003, Carnival Cruise Lines were the first to install a PAWDS aboard their 2,056 passenger (plus 1,000 crew members) capacity, M/S ...


    By PyroGenesis Canada Inc.

  • Effect of co-managing organic waste using municipal wastewater and solid waste treatment systems in megacities

    A model was developed to calculate the mass and heat balances of wastewater and municipal solid waste treatment plants when these plants operate either separately or together with a mutual dependence on mass and energy. Then the energy consumption, life cycle costs (LCCs), greenhouse gas (GHG) emissions and effluent quality were evaluated under various scenarios to identify the most effective ...


    By IWA Publishing

  • The Waste Minimation National Plan

    Executive Summary The U.S. Environmental Protection Agency (EPA) is committed to making pollution prevention the guiding principle of the Agency's environmental efforts. The 1984 Amendments to the Resource Conservation and Recovery Act and the 1990 Pollution Prevention Act set in policy the preference for source reduction over waste management. EPA is reaffirming this commitment. With the release ...


  • Heavy Metals in Waste

    Untitled Document Summary and discussion The aim of this report has been to demonstrate the existing knowledge regardng the harmful effects of heavy metals, the ...

  • The Newest Waste tirePyrolysis Plant

    Tires Recycling Machine, waste tire recycling machine, tire recycling equipment is mainly used to extract fuel oil from rubber and plastic.   Raw Materials you can use:  Tires, soles, cable skin, all kinds of rubbers and so on. You can put any thing into the machine to extract fuel oil, as long as the content ...

  • Management of Hazardous Wastes

    ' Management of hazardous waste is a growing concern in many countries. The long-term impacts and costs of improper disposal can be very high and the emphasis must be on prevention. A comprehensive management system should include (i) policies, institutions and effective regulations and (ii) adequate and acceptable disposal facilities (either public or private). This note outlines the key ...


    By The World Bank

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you