waste combustion technology Articles

  • Introducing LaserGas III SP CO – a combustion analyzer for rough environments

    NEO Monitors unveils the industry’s most compact CO combustion analyzer suitable for the most demanding environments. LaserGas III CO includes measurement of CH4, H2O and temperature in one single unit designed to reduce risk. Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is ...


    By NEO Monitors AS

  • Case study - Procurement and installation of a Biogas desulphurization unit at the Chania WWTP

    A proposal based on Bioconservacion’s technology was selected as the winning bid in the public tender released in 2015, covering the design, procurement and construction of a biogas desulfurizing unit to be installed in the waste water treatment plant in Chania, Greece. With a population over 100,000, Chania is the second largest municipality in the Greek island of Crete. Its waste water ...


    By Bioconservacion SA

  • Two-Stage Combustion of High-PVC Solid Waste With HCL Recovery

    Untitled Document Abstract A waste-to-energy process based on high-PVC solid wastes is discussed. The basis is that at 200-400°C the PVC fraction decomposes ...

  • Size reduction of substitute combustibles (RDF)

    The new pilot installation of SITA Wiebe GmbH, Bielefeld/Germany, processes highly calorific commercial and industrial waste to become quality-assured substitute combustibles for cement industry and/or power plants. Basic items of this ultra-modern processing installation are two one-shaft size reduction machines of type WLK 30 Super-Jumbo of WEIMA Maschinenbau GmbH, Ilsfeld. The total output of ...


  • Why high temperature combustion of landfill gas?

    Due to the accumulation of knowledge and the tightening of environmental law, the landfill technology has increasingly become concerned with the management of trace compounds in landfill gas. With landfill gas, contamination is through sulphur, chlorine, fluorine, halogenated hydrocarbons and heavy metals. Other trace elements such as volatile organic compounds (VOC), impose environmental ...


    By Hofstetter BV

  • The resurgence of waste-to-energy and conversion technologies: Where’s the risk?

    Waste processing technologies have come a long way in the last century. The technology to extract energy from the combustion of solid waste has been in use since 1898, when the first waste-toenergy (WTE) facility was built in New York. Since that time, WTE technologies have evolved from incinerators that were simply destruction units to large-scale mass-burn combustion and refuse-derived fuel ...


    By Waste Advantage Magazine

  • Waste plastic recycling plant with high technology

    Company Profile: Waste plastic pyrolysis plant, with the superiority of low capital investment and high fuel financial price, it has become the first preferred waste disposal method in many countries.This profitable project was established every week with low labor costs and high profits. Huayin renewable energy equipment company, established in 1993,have been a leader of oil pyrolysis ...


  • Remediation of Abandoned Coal Mines Using Coal Combustion Products

    A slurry of mine water and coal combustion fluidized bed ash (FBA) was injected into an abandoned coal mine in Eastern Oklahoma in July 1997. Oil-field technology was used to inject 1.8 Gg (418 tons) of FBA through five wells in 15 hours. Alkaline minerals in the FBA neutralized acidity and imparted alkalinity to the mine water. Thus, this remediation method uses the waste from an industrial ...


  • Energy Recovery from Residual Waste by Means of Anaerobic Digestion Technologies

    ABSTRACT Anaerobic digestion (AD) is a natural process, spontaneously taking place in natural surroundings, such as marshes,bogs, paddies, or in cesspits, landfills, and dedicated digesters, used for the conversion of organic waste into a rich gas. Typical AD substrates are: manure, sewage sludge, high BOD wastewater, and – more recently - the organic fraction of Municipal Solid Waste (MSW), ...


    By ORBIT e.V.

  • Garbage to Gold: Breakthrough Technology Uses Plasma to Convert Waste to Useable Products

    A breakthrough technology that uses high-temperature thermal plasma to turn household garbage into a renewable energy source, scrap metal and mineral wool is attracting worldwide attention for Huntsville-based Plasma Waste Recycling. […]  The PWR process doesn"t involve combustion, but a gasification process that is ...


  • Plasma resource recovery technology –converting waste to energy and valuable products

    Abstract Plasma Resource Recovery (PRR) is a revolutionary technology that can treat virtually any type of waste by combining gasification with vitrification. Vitrification produces inert slag that can be used as a construction material. Gasification produces a fuel gas containing carbon monoxide (CO) and hydrogen (H2), used for cogeneration of electricity and steam. The plasma fired ...


    By PyroGenesis Canada Inc.

  • Transportation and market feasibility analysis for innovative coal combustion by-products: WoodBrik in Greenbrier County, West Virginia

    This paper outlines a transportation and market feasibility study performed in support of Western Greenbrier Co-Generation, LLC's participation in the first Department of Energy Clean Coal Initiative. Western Greenbrier Co-Generation, LLC is a unique company formed by three local city councils to support the development of clean coal technologies in Greenbrier County, West Virginia. The study ...


    By Inderscience Publishers

  • Case study - Internal combustion engines and process heat-to-power application in Czech Republic

    Breclav-Postorna, Czech Republic Hot Water Temp:  88-92°C Hot Water Flow:  10 l/s KWth Average (Thermal Input): 600-750kWth Cooling:  Cooling Tower Cold Water Temp: 18-24°C Cold Water Flow: 12-14 l/s Green Machine Gross Output: Two machines at 25-33kWe each ElectraTherm installed two Green Machines at FOSFA, a manufacturer of phosphoric acid and ...


    By ElectraTherm

  • Thermal Treatment Technologies

    Hot gas decontamination: Hot gas decontamination is a technology still in the pilot-scale of development that can be used for decontamination of explosives-contaminated masonry or metallic structures. The method involves sealing and insulating the structures, heating with hot gas stream to 260 °C (500 °F) for a prescribed period of time, volatilizing the explosive contaminants, and destroying ...

  • Utilizing Waste Heat For Power

    Continuous duty gen-sets provide base-load power generation in diverse applications around the globe. However, high fuel costs and engine maintenance are pain points felt by operators. A low-maintenance path to significant fuel savings and lower emissions is what the U.S. Department of Defense (DOD) had in mind when they approached ElectraTherm to integrate the company’s Green Machine waste ...


    By ElectraTherm

  • Waste-to-energy in Indonesia

    Brief description on Waste-to-energy technologies and particular equipment that the company has designed and manufactured. CV Wirajasa Teknik Industri is offering Waste Oil Burner and Biomass Combustion to replace conventional burners that utilize fossil fuel such as natural oil, synthetic lubricating oil, Biomass Combustion Chambers can be applied in sereal and nut drying, organic fertilizers ...


    By CV Wirajasa Teknik Industri

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • NOx Scrubbing Technology Breakthrough

    Pacific Rim Design and Development and Dupont are proud to introduce a technology breakthrough in the treatment and safe elimination of problematic nitric oxide (NO) and nitrogen dioxide (NO2 ).  There are six forms of nitrogen oxide (NOx); the drawings to the right show the two most problematic forms.  These two are of particular interest because they are identified as atmospheric ...


  • Energotechnological oil shale utilisation by means of an SHCU - a low waste and environmentally sound technological process

    This paper presents the calculated data on the emissions into the environment from the low-waste energotechnological solid heat carrier units (SHCUs) working with oil shales. A comparison of this technology with direct oil shale combustion at a power plant was carried out using the example of an Estonian power plant. The energotechnological plant (ETP) including two units SHCU-3000 with an oil ...


    By Inderscience Publishers

  • Innovative Torbed Process Reactor Technology

    The TORBED Process Reactor Technology is being commercially applied to recovery of metals, catalysts and dry scrubbing of gaseous effluents amongst many other novel uses. Recent innovations in the pasteurisation and densification of clinical wastes for recovery and high intensity waste wood combustion will be described and the results achieved discussed. New areas of application will also be ...


    By Torftech Group

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you