waste disposal industry Articles

  • Industrial Wastewater Treatment - Paint/Pigment Dye Industry

    Innovation in Industrial Wastewater Treatment - Sustainable Water Reuse Strategies Applied to the Paint/Pigment Dye Industry Introduction The paint/pigment industry is a large consumer of process and wash water to be used in various water based paint pigment products. The water usage for this industry is estimated at 75-85 million gallons per day, with ...

  • Waste disposal

    A Denbighshire-based waste management consultancy that assists companies in the removal of recyclables from their waste streams was recommended to use NetRegs. Stephen Wilson, Environmental Cost Savings Director of Seven Ways Environmental Services, said: “We offer companies a total waste management solution by reducing the environmental impact of the waste they produce. “We have recently ...


    By NetRegs

  • Industrial Solid Waste Disposal in China

    Abstract This paper investigates the current situation of industrial solid waste disposal in China. Recent Chinese literature about industrial solid waste disposal in China has been revieved and data are analysed on the amount of industrial solid waste production and disposal in Wuhan City in 1992. The results show a rapid increase in the total amount of industrial solid wastes in China: It was ...


  • Fighting soil contamination with XRF

    Soil contamination Complying with new environmental regulations is a fast growing concern for companies and local officials tasked with ensuring that industries reduce pollution and clean up after themselves. It’s a particularly challenging issue when it comes to soil contamination It’s not always easy to detect as it silently contaminates crops and the ground water supply. XRF ...

  • Fluid waste management and disposal practices

    Prior to the early 80s and the introduction of AIDS into our society, infection control practices were designed almost exclusively to protect the patient from developing a nosocomial infection an infection acquired after admission to the hospital. Protocols were focused on protecting the patient, with little or no emphasis on the health care workers potential to become infected. Hepatitis B has ...

  • Fluid waste management and disposal practices - industrial hygiene news

    Prior to the early 80s and the introduction of AIDS into our society, infection control practices were designed almost exclusively to protect the patient from developing a nosocomial infection - an infection acquired after admission to the hospital. Protocols were focused on protecting the patient, with little or no emphasis on the health care worker’s potential to become infected. ...


  • Societal risk communication and nuclear waste disposal

    How to deal with health and environmental protection is one of the most difficult and challenging modern policy issues. Accurate and balanced public understanding and perception of risk is essential for the development of technologies and the protection of public health and environment. Misconceived views of various environmental risks could result in our limited resources being improperly ...


    By Inderscience Publishers

  • What are the problems facing London due to waste disposal?

    This summer, Sadiq Khan, the Mayor of London, published a draft London Environment Strategy for public consultation. The strategy outlines his plans to tackle the London waste disposal concerns. When it comes to London waste disposal, Khan’s ambition is that: “by ...

  • Energy efficient waste disposal solution - Case Study

    Piled higher It’s 6.20 metres high, weighs 40 tonnes and has a pressing power of 1,200 kilonewton (kN): the fully automated VK 12018 R channel baling press from HSM in Frickingen for pressing paper, cardboard and cardboard boxes has been in use by the disposal company SITA in Hochheim for around three months. There are fewer bales thanks to the enormous pressing pressure and the large ...


    By HSM GmbH + Co. KG

  • WEISS provides for the heat - and disposes of the waste case study

    The very first time PLIMOB learnt about Weiss was in 1995 at which time contacts at IKEA told about combustion plants from WEISS. IKEA is the most important customer for PLIMOB so the management listened to the recommendations. PLIMOB is producing wood furniture; large quantities of wood chips and sawdust are a spin-off effect from their production. Traditionally wood-working industries – ...


    By Weiss A/S

  • MB Crusher to slash cost of waste disposal

    Disposal of demolition or construction waste is a common cost element facing many contractors, particularly in our major cities where significant landfill charges are applicable. It’s not only landfill charges that cost. When truck fuel, road tolls, operator time and project downtime are considered, the costs really add up. Disposal of small lots can also be annoying as these stockpiles ...


    By MB Crusher

  • EU Confirms Disposal Ranking for Waste Burning

    The European Commission has confirmed that, following a European court of justice ruling delivered in February, energy recovery from dedicated waste incinerators can no longer be counted towards waste recovery targets under the EU packaging directive. By extension, the same should logically apply also to the end-of-life vehicles (ELV) and waste electrical and electronic equipment (Weee) ...

  • Distillery Wastewater Treatment and Disposal

    Untitled Document ABSTRACT 1. One of the most important environmental problems faced by the world is management of wastes. Industrial processes create a variety ...


  • Sludge Treatment and Disposal Technologies

    Most wastewater treatment processes produce a by-product that purifies wastewater before it is released into local waterways. This by-product is named as sludge. Typically in solid, semi-solid or liquid state, it is in fact an amalgamation of all the liquid wastes that are discharged by domestic houses, commercial properties, industry, and/or agriculture after aerobic biological treatment. ...


    By IWA Publishing

  • The Trouble with Asbestos Disposal

    Hailed as a miracle mineral because of its superior fire resistance and tensile strength, asbestos was installed abundantly into our built environment for over 200 years. However, once it was established that this undeniably useful resource was a dangerous carcinogen, Australia and many other countries enacted strict regulations for handling asbestos and asbestos containing material (ACM). There ...


    By ABCOV Companies , LLC

  • Continuous Real Time Water Monitoring for Radiation Safety Terrorist Attack, Improper Disposal of Industrial Waste, Accidental Discharge

    Safe drinking water is essential to life on earth. Unfortunately, this vast infrastructure suffers from critical vulnerability. Keeping America safe with continuous real time water monitoring is a vital goal and is currently being addressed for biological and chemical risks. For monitoring of radionuclides in drinking water as recommended in the Safe Drinking Water Act 8, the Clean Water Act 9, ...


    By Technical Associates

  • CETCO scores a perfect 10 with RM-10 - eliminating hazardous waste disposal

    CETCO Oilfield Services’ Industrial Wastewater Treatment Division has over 30 years experience in treating industrial wastewater, helping clients meet compliance requirements and reduce costs. Additionally, CETCO Oilfield Services’ RM-10® flocculant has been successfully applied in the aerospace sector, turning a previously hazardous waste product into a delisted sludge. The aerospace facility ...


    By CETCO Energy Services

  • How to make your waste disposal process pay for itself

    Incineration waste to energy means you can get FREE HEAT! It’s true to say that the first priority of any of the industrial waste incinerators we design and manufacture is to provide an efficient, cost-effective, environmentally responsible and legally compliant waste disposal system. ...

  • Deep in the Dumps? How municipalities can avert a waste disposal crisis

    Municipalities across Canada are looking for economical and environmental methods to improve their waste management diversion methods. Some are scrambling to assess and extend landfill disposal capacity and others are trying to dramatically increase their diversion rates. Many are initiating a combination of strategies. Canada's largest city has arguably received the most attention with regard to ...

  • High technology comes to Hazardous waste disposal – Case Study

    Skyrocketing hazardous waste disposal costs for the USC/ Division, of C.R. Bard, Inc., Billerica, Massachusetts led them to a high technology solution. USC/, a medical products manufacturer that develops and produces angioplasty catheters, had seen its solid hazardous waste disposal costs rise to almost $500 per 55- ga/lon drum, excluding costs associated with inplant storage, handling, and ...


    By Waste Control Systems Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you