waste disposal system Articles

  • Waste Disposal

    Introduction The final step in the waste management process is waste disposal, the permanent isolation of waste. Some wastes can be managed and disposed safely with existing facilities and proven methods. Other Department of Energy (DOE) wastes require more complex disposal facilities. DOE has conducted extensive research into alternative waste disposal methods and has concluded that deep ...

  • Packaged Polymer Injection Dewatering System - Case Studies

    Case Study Number 1 Industry: Oil & Gas, Mining and Civil Waste Management Application: Treatment of Waste Drilling Fluids for Recycling Location: Brisbane, Australia Configuration: 20’ Explosion Proof HMI Dewatering System with VFD Driven EE-1448HD Centrifuge. Objective: Wastewater Treatment Sludge Dewatering in Order to Facilitate Landfill ...


    By Elgin Separation Solutions

  • Reverse Osmosis and Nanofiltration Membrane Filtration Systems: Common Problems and How to Fix Them

    Reverse osmosis (RO) and nanofiltration (NF) are membrane filtration technologies that are designed to remove solute ions and molecules from a pretreated liquid stream. Well-designed RO/NF units are compact and demand relatively little maintenance, making them an attractive alternative to conventional treatment trains. Even despite the merits of today’s efficient RO/NF technologies, it pays ...


    By SAMCO Technologies, Inc.

  • How Do You Choose the Best Reverse Osmosis and Nanofiltration Membrane System for an Industrial Facility?

    As global demands for clean water increase, more and more industrial facilities are looking toward membrane filtration solutions, such as reverse osmosis (RO) and nanofiltration (NF), to help manage intake, process, and waste water treatment. Using membrane filtration can help your facility reuse wastewater and virtually eliminate discharge fees, and depending on the industry or required use, it ...


    By SAMCO Technologies, Inc.

  • Fluid Waste Management and Disposal Practices

    Prior to the early 80s and the introduction of AIDS into our society, infection control practices were designed almost exclusively to protect the patient from developing a nosocomial infection - an infection acquired after admission to the hospital. Protocols were focused on protecting the patient, with little or no ...


  • Fluid waste management and disposal practices

    Prior to the early 80s and the introduction of AIDS into our society, infection control practices were designed almost exclusively to protect the patient from developing a nosocomial infection an infection acquired after admission to the hospital. Protocols were focused on protecting the patient, with little or no emphasis on the health care workers potential to become infected. Hepatitis B has ...

  • WEISS provides for the heat - and disposes of the waste case study

    The very first time PLIMOB learnt about Weiss was in 1995 at which time contacts at IKEA told about combustion plants from WEISS. IKEA is the most important customer for PLIMOB so the management listened to the recommendations. PLIMOB is producing wood furniture; large quantities of wood chips and sawdust are a spin-off effect from their production. Traditionally wood-working industries – ...


    By WEISS A/S

  • Muncher prototype providing greener option for waste disposal

    Revolutionizing the way companies and facilities dispose of everyday waste and materials, Nevada-based company Ecologico-Logic is unveiling and demonstrating its machine prototype, the Muncher, as an environmentally friendly alternative to waste disposal.   Ecologico-Logic consists of seven individuals with strong backgrounds in business, manufacturing, mechanical ...


    By Eco Sphere Sciences, Inc.

  • Societal risk communication and nuclear waste disposal

    How to deal with health and environmental protection is one of the most difficult and challenging modern policy issues. Accurate and balanced public understanding and perception of risk is essential for the development of technologies and the protection of public health and environment. Misconceived views of various environmental risks could result in our limited resources being improperly ...


    By Inderscience Publishers

  • Energy efficient waste disposal solution - Case Study

    Piled higher It’s 6.20 metres high, weighs 40 tonnes and has a pressing power of 1,200 kilonewton (kN): the fully automated VK 12018 R channel baling press from HSM in Frickingen for pressing paper, cardboard and cardboard boxes has been in use by the disposal company SITA in Hochheim for around three months. There are fewer bales thanks to the enormous pressing pressure and the large ...


    By HSM GmbH + Co. KG

  • Arsenic waste from water treatment systems: characteristics, treatments and its disposal

    As with other water treatment systems, arsenic treatment creates not only quality water but arsenic waste as well. Management of arsenic waste is now becoming a major public concern due to its harmful effects on the surrounding environment, including serious health problems such as skin cancers and various internal carcinomas. The main aim of this paper is to review: (i) the characteristics of ...


    By IWA Publishing

  • Sludge Treatment and Disposal Technologies

    Most wastewater treatment processes produce a by-product that purifies wastewater before it is released into local waterways. This by-product is named as sludge. Typically in solid, semi-solid or liquid state, it is in fact an amalgamation of all the liquid wastes that are discharged by domestic houses, commercial properties, industry, and/or agriculture after aerobic biological treatment. ...


    By IWA Publishing

  • The National Transuranic Waste Program: Preparing Waste for Disposal at WIPP

    ABSTRACT The National Transuranic Waste Program (NTWP) is the Department of Energy’s (DOE's) program for managing all transuranic (TRU) waste under DOE’s purview. Much of this waste is eligible for disposal at the Waste Isolation Pilot Plant (WIPP); a portion is not. The NTWP integrates TRU-waste system requirements so that all DOE TRU waste is effectively managed from generation to disposal, ...


    By Weston Solutions, Inc

  • The Trouble with Asbestos Disposal

    Hailed as a miracle mineral because of its superior fire resistance and tensile strength, asbestos was installed abundantly into our built environment for over 200 years. However, once it was established that this undeniably useful resource was a dangerous carcinogen, Australia and many other countries enacted strict regulations for handling asbestos and asbestos containing material (ACM). There ...


    By ABCOV Companies

  • Paper and Cardboard - Recovery or Disposal?

    To provide a solid basis for policies and policymakingin the field of waste management, the environmental and economic impacts causedby different waste treatment options should be examined. In recent years, a large number of studies comparing recycling with recovery or final disposal have been published, which are based on life cycle assessment (LCA) and cost-benefit analysis (CBA). To the ...

  • Case Study: MSW Disposal System Adds Gasifier

    Unit Will Help Community with Odor Control And Provide High-Carbon Biochar For Revenue A third municipal deployment of PHG Energy’s gasification technology has been approved by Sevier Solid Waste, Inc. The East Tennessee regional authority operates an industry-recognized and innovative garbage composting plant processing more than 100,000 tons annually from the Sevierville, ...


    By PHG Energy, LLC

  • Comparison of monitoring programmes of ultimate disposal facilities for radioactive waste and carbon dioxide

    Reliable and cost–effective monitoring is an important part of making geological repositories safe, effective, and acceptable for radioactive waste disposal and carbon dioxide (CO2) storage. The major objectives of monitoring should include the evolution of disposal systems compared to the baseline data of the undisturbed site, as well as the validation of the assumptions and ...


    By Inderscience Publishers

  • High technology comes to Hazardous waste disposal – Case Study

    Skyrocketing hazardous waste disposal costs for the USC/ Division, of C.R. Bard, Inc., Billerica, Massachusetts led them to a high technology solution. USC/, a medical products manufacturer that develops and produces angioplasty catheters, had seen its solid hazardous waste disposal costs rise to almost $500 per 55- ga/lon drum, excluding costs associated with inplant storage, handling, and ...


    By Waste Control Systems Inc

  • Chemical Reaction for Disposal of Waste Nitrogen Fluoride From Manufacturing Process of Semiconductors

    New technology to make trifluoro-nitrogen (NF3) gas harmless has been developed and a new concept on the removing toxic gas to be used in the process of manufacturing semiconductors is established. The NF3 gas is a toxic and special type of gas that is used in the process of manufacturing semiconductors and its specific application includes the dry etching of semiconductors, cleaning of CVD ...


  • Knowledge management for radioactive waste disposal: moving from theory to practice

    The exponential growth in the knowledge base for radioactive waste management is a cause for concern in many national programmes. In Japan, this problem is exacerbated by a volunteering approach to siting of a deep geological repository, which requires particular flexibility in the tailoring of site characterisation plans, repository concepts and associated Performance Assessments (PAs). ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you