waste feeder Articles

  • A STIEFEL project Waste Incineration Plant (KVA) Trimmis case study

    The waste incineration plant (KVA) Trimmis is situated in the eastern part of Switzerland and is connected to the railway network. As it is the only incineration plant in this province, it serves a large area with approximately 131’000 inhabitants. The local authorities waste disposal association named GEVAG is a public body serving 43 convention communities and 97 associated municipalities ...


    By Jakob Stiefel GmbH

  • Turnkey Manufacturer & Supplier of Large scale Waste Plastic & Tire Pyrolysis Plant Machinery

    We establish large scale pyrolysis plants on turnkey basis. The total turnkey supply includes of machinery designing & simulation, equipment manufacturing, supply, installation, commissioning, technology transfer and operational training. We are one of the prominent leaders in establishing pyrolysis plants on turnkey basis.   Advantages of pyrolysis plants manufactured & ...

  • Flow measurement with PicoFlow - Case Study

    Application A waste incineration plant produces exhaust gases during the incineration process. These gases need to be cleaned. Therefore hearth furnace coke is used continuously and, if needed, lime hydrate. Both materials are stored in silos. Via a rotary valve the two materials are blown from the storage places into a conveying air fl ow and thereby reach the ...


    By ENVEA

  • Corrugator Wastewater Design Build

    Featured Wastewater Treatment Case Study Corrugator Wastewater Design Build Cost Reduction = $ Increased Profit $ A Pre-Print ...


    By Integrated Engineers Inc.

  • Food Waste Collection Companies Grow With The Flow

    On October 1, the Commonwealth of Massachusetts’ ban on landfill disposal of commercial organics from establishments generating one ton or more of food waste per week goes into effect. On the front lines of helping these businesses and institutions comply are organics haulers, many of whom have been offering their services for years. “Seven years ago, we were servicing about two dozen ...


    By BioCycle Magazine

  • Another large medical contract delivered on-time

    26 custom i8M-60 incinerators were loaded up today and were shipped to Egypt. These medical units have been fitted with pollution control systems and bespoke liquid ...


    By Inciner8 Limited

  • Case study - Ballast Phoenix at Tilbury, United Kingdom

    ASH Separation System including; 1 Chrizzy feeder 2 Conveyor belts 400 width 3 Conveyor belts 650 width 6 Conveyor belts 800 width 5 Conveyor belts 1000 width 3 Conveyor belts 1400 width 1 Screen Mogensen screen 1 Trommel 4/2000 2 Eddy current systems with vibratory feeder 2 Air separation ...

  • Common Treatment Technologies for Radionuclides in Soil, Sediment, and Sludge

    Unlike organic contaminants (and similar to metals), radionuclides cannot be destroyed or degraded; therefore, remediation technologies applicable to radionuclides involve separation, concentration/volume reduction, and/or immobilization. The most commonly used treatment technology for radionuclides in soil, sediment, and sludge is solidification/stabilization (S/S). This treatment technology is ...

  • Case study - BLC Group nv at Ronse, Belgium

    Sorting system for BLC Group nv at Ronse, Belgium Sorting System including: 1 Belt feeder system 1 Trommel Screen Design, Production and Delivery ...

  • Jumeirah Beach Residence - case study

    Jumeirah Beach Residence is the single largest residential development in the world, 40 towers comprising of 36 residential towers and 4 five star hotels spanning a built up area of 22 million sqft across 7 podiums interconnected at level 3. The towers span various heights from 28 to 55 floors and comprise 6970 apartments, 70,000 sqm of retail and leisure and 5 parking levels. Although JBR was ...


    By Envac AB

  • LiquiSorb 200 saves time and money before the rubber hits the road

    Problem In tire manufacturing there is much more to the finished product than just rubber. Tire chords, a by-product of the manufacturing process, are coated with a proprietary dip solution that acts as a flexible adhesive/bond in tires. This dip solution has an extremely high concentration of solids in water, making traditional wastewater treatment techniques less effective, extremely slow, and ...


    By CETCO Energy Services

  • Plastic to crude oil process pyrolysis plant

    Plastic to crude oil process pyrolysis plant can convert the plastic waste to energy, such as plastic pyrolysis crude oil, carbon black and combustible gas. Those products are popular in the market, and they also have a great market value. Plastic to crude oil process pyrolysis plant 1.Put raw materials into ...

  • The Advantages and Features of Mineral Powder Ball Press Machine

    What is mineral powder briquette machine? This machine can press mineral powders into pellet and can also protect the environment and bring you with profits. Yes, it is just so amazing and significant. While ensuring product quality, Fote Machinery constantly expands the advantages and features of our briquette machine ...

  • From very big to very small - Case Study

    Graf Plastics GmbH, at its Teningen plant (fig. 1) manufactures its large-volume Carat underground tanks (fig. 2) for rainwater utilization.The manufacture of the containers ranging up to 6,500 litres produces waste, which is reduced in a single phase to mill material using a WLK 30 Super-Jumbo single-shaft shredder from WEIMA Maschinenbau GmbH in Ilsfeld. Rainwater utilization becoming ...


    By WEIMA

  • Recycling aluminium explained - Case Study

    A major magnetic equipment manufacturer has successfully solved numerous Aluminium Recycling problems world wide. Master Magnets Ltd is a world leader in the field of Metal Separation applications, they are now willing to share the secrets behind their success. The recycling of aluminum generally produces significant cost savings over the production of new aluminum even when the cost of ...


    By Master Magnets Ltd

  • Five Common Problems with Raw Water Treatment and How to Avoid Them

    For industrial companies treating a raw water source for its processes, there are several issues that can surface during treatment that we see on a regular basis. We’ve broken out the five most common problems with raw water treatment and how to avoid them below. Whether you’re designing a new plant or updating existing equipment, avoiding these five common raw water ...


    By SAMCO Technologies, Inc.

  • Diversion Deposits, Grants Giving a Boost to C&D Diversion

    Waste characterization studies show a fairly high percentage of potentially recyclable construction and demolition materials going into the landfill. An innovative program in California taps into public sector incentives and private sector investments. Part II IN 1998, the city of San Jose, California conducted a waste composition study to determine what materials were still going into ...


    By BioCycle Magazine

  • Corrugating Facility Redesign Wastewater Optimization Case Study

    Paper & Pulp Industry Case Studies Corrugating Facility Wastewater Optimization Integrated Engineers, Inc. modified a corrugating facility in Southern California that required a design build ...


    By Integrated Engineers Inc.

  • Case study - Nottinghamshire Recycling

    DUO Equipment delivered and installed a new full washing and water management plant for Nottinghamshire Recycling Ltd (NRL). Based in Worksop, Nottinghamshire, NRL is a sustainable waste solution provider processing C & D waste, green waste, wood and recycled aggregates. The new washing and water management plant (which includes a Gennaretti centrifuge system) will provide NRL with the ...


    By DUO (Europe) plc

  • Large volumes compressed into small volumes saves costs case study

    Vöhringer GmbH with its 120 staff and ultramodern machine park in Trochtelfingen each day processes up to 40,000 m2 of sheeting. This is mainly used for manufacturing specialist furniture parts up to complete furniture sets – especially for caravans and mobile homes but also for exhibition stand construction, for doors and the furniture industry. Chippings and dust accumulating during ...


    By WEIMA

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you