waste gas automated monitoring Articles

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • Online Odors Monitoring in Waste Water Treatment Plants

    Odors are very distinct air contaminants as they generate nuisances (see note at the end). The factors playing a role in the determination of odor annoyance are : odor concentration and intensity, frequency, appreciation, duration, synergy and location. Chromatotec proposes an automated solution to well identify the origin and the level of odors. Technology Description We offer a ...


    By Chromatotec Group

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Unmanned remote and wireless CDM monitoring case study

    Remote and wireless monitoring technology to meet CDM requirements is in its infancy in Europe. Carbon trading is driving it globally, especially in North and South America. That experience and technology is now finding a demand in Europe and Asia in landfill, biogas from food and animal waste in digesters and water treatment sludge digestion. Methane recovery from landfill and anaerobic ...


    By Geotech

  • CDM monitoring & reporting for carbon credits case study

    Abridged from a Wastecon 2008 Presentation and Paper by Mitchal L. Cassel LANDTEC, Colton, California The project sites The project is in Brazil and obtains certified emission reductions (CER) or carbon credits for a large scale, waste handling and disposal, clean development mechanism (CDM) project. Methane emissions are being reduced through collection and destruction of ...


    By Geotech

  • Case study - JJO wood waste – biomass

    A UK leading producer of kitchens and bathroom furniture invest in the future of no costs for the disposal of wood waste and no oil or gas bills for heating of the total company site premises. J J O PLC – manufacturer of Colonial Kitchens, Colonial Bedrooms, eco Kitchens and eco Bathrooms. Founded over 100 years ago and now the leading supplier to many of the best outlets within the ...


    By Mawera (UK) Ltd

  • New laser-based dust emission monitoring system

    Abstract A new generation of continuous particulate matter concentration monitoring instruments is presented, covering a measuring range of 0 to 1000 mg/m3. The laser-based scattered light instrument gives an improved stability as well as excellent resolution in the low range. This enables high concentration measurement as well as especially low emission monitoring down to 0.01 mg/m3 with a ...


    By Sigrist-Photometer AG

  • Rainbow Environmental Services aims for Zero Waste with CP Group and Siemens

    Chase Clark wants to be a recycler with Rainbow Environmental Services when he grows up. The three-year-old boy loves nothing more than watching the collection trucks roll out of Rainbow’s Huntington Beach, California Material Recovery Facility (MRF) early in the morning. “Most of the drivers have gotten to know Chase, and they’ll honk their horns and wave on their way out for ...


    By CP Manufacturing, Inc.

  • Questions and answers on the Commission Communication `Towards a Circular Economy` and the Waste Targets Review

    What is a circular economy? A circular economy preserves the value added in products for as long as possible and virtually eliminates waste. It retains the resources within the economy when a product has reached the end of its life, so that they remain in productive use and create further value. It may involve: Increasing the time products deliver their service before ...

  • California Global Warming Solutions Act (AB 32): Early actions for refrigerant gas management

    How to stay ahead and address the early action requirements for Stationary Equipment Refrigerant Management to be included in updates to AB 32. The California Global Warming Solutions Act (AB 32), first passed in 2006 with additional early actions taking effect in 2010, is a broad and comprehensive directive with the goal of reducing greenhouse gasses (GHGs) by approximately 25% by the year ...


    By Verisae

  • Gas blending process adopts CVA for improved accuracy, economy and environmental performance - Case Study

    Overview Rotork’s innovative CVA electric control valve actuator technology has successfully delivered an improvement in performance with reduced operating costs for the vital gas blending process on a European natural gas distribution network. The Reason Fluxys is the independent operator of the natural gas storage and transmission system in ...


    By Rotork

  • Case study - Biogen Greenfinch Westwood

    Non-stop clean power generation uses smart machines and state-of-the-art technology to help keep running. Keep it simple - and to keep it profitable, keep CHP engines running. That's just part of the formula for success at the BiogenGreenfinch-designed and run Westwood anaerobic digestion (AD) plant in Northamptonshire. Built and funded by parent company Bedfordia Group plc this £10 ...


    By Geotech

  • Biomass fired thermal oil heater case study

    This 12 MWth output Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in December 2006. The system has a capacity of 12 MW thermal output producing up to 10MWth of 300°C 10 Barg pressure hot oil, up to 10 tonnes per hour of steam and 2 MWth of 200°C hot air. This is all achieved from one grate heating three separate heat exchanges. The ...


    By Biomass Power Limited (BPL)

  • 4.5 MWe Refuse Derived Fuel to Energy Plant Case Study

    This 4.5 MWe Biomass Power Plant is one of the turnkey products of Biomass Power. The plant has a capacity of 24 MW thermal and rated at 4.5 MWe producing 35,476MWh of green electricity per year, 100% of which is exported to the grid. The fuel used is segregated biomass from a commercial and industrial waste collection business. The fuel is produced by removing some of the recyclable material ...


    By Biomass Power Limited (BPL)

  • Case study - Green Machine uses biomass to put power back on the grid

    St. Helena Island, South Carolina Gross Power Output: up to 43kWe Thermal Heat Input: 200 - 500kWt Hot Water Input Range: 160 - 235°F Hot Water Flow: 150 GPM     Cold Water Input: 68°F Cold Water Flow: 150 GPM In fall 2010, American Capital Resources Company installed ElectraTherm’s heat-to-power Green Machine, for generating power from ...


    By ElectraTherm

  • PSEG Transforms Environmental Compliance into Powerful Driver for Operational Efficiency, Sustainability

    As New Jersey’s oldest and largest investor-owned utility provider, Public Service Enterprise Group (PSEG) provides gas and electricity to three-quarters of the state’s population as well as supplying power to Connecticut and New York. PSEG has always been committed to ensuring that its facilities are in full compliance with a multitude of municipal, state and federal regulations ...


    By IHS

  • How has MCERTS impacted CEMS?

    Industrial process operators that produce gas emissions to atmosphere are regulated by the Environment Agency. Monitoring of these emissions ensures that the environment is being properly protected and helps them manage their own impact on the environment. Under the Environmental Permitting Regulations, these sites are required to continually measure emission parameters from their chimney-stacks ...


    By a1-cbiss

  • Five of the Best Cooling Tower Water Treatment Equipment Supply and Technology Companies

    Here at SAMCO technologies, our custom-engineered, cutting-edge solutions for your cooling tower water treatment needs have been developed by helping our customers solve some of the most complex purity and separation issues globally for over 40 years. Because of our skilled engineers and overall expertise in cooling tower water treatment, we are confident that our solutions are some of the best ...


    By SAMCO Technologies, Inc.

  • FTIR Emissions Analyser helps manage UK Power Station

    A Gasmet FTIR multiparameter emissions monitor at Thetford power station is being used to demonstrate that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet’s UK distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are displayed ...


    By Gasmet Technologies Oy

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Milton Keynes based Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Quantitech Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you