waste gas incinerator Articles

  • Incineration

    Introduction: High temperatures, 870 to 1,200 °C (1,400 to 2,200 °F), are used to volatilize and combust (in the presence of oxygen) halogenated and other refractory organics in hazardous wastes. Often auxiliary fuels are employed to initiate and sustain combustion. The destruction and removal efficiency (DRE) for properly operated incinerators exceeds the 99.99% requirement for hazardous waste ...

  • Waste Incinerator Project

      Medical Waste Incinerator YD Model is our classic product for market. All series included burning capacity 10kgs per hour, 30kgs per hour,50kgs per hour,100kgs per hour,150kgs per hour,300kgs per hour,500kgs per hour. Up to now, all models sale to all over the world and have good feedback from end-customer. The YD Model medical incinerator have multi-combustion chamber and basic dry ...


  • Minicipal Waste Incinerator Case History

    Low temperature plant operation had resulted in severe baghouse corrosion and constant dust blockages throughout the system. It was decided to raise the operational temperature of the incinerator and change the acid gas scrubbing agent from lime to sodium bicarbonate. However, the existing felt filter media could not cope with the change in acid gas scrubbing agent and “blinded” very rapidly ...


    By W. L. Gore & Associates

  • Atmospheric impact of a municipal wastes incinerator

    This paper presents a case study of an air pollution dispersion model for the atmospheric impact assessment of a new municipal wastes incinerator (MWI). The capacity of the present MWI will increase more than ten times, and a new high-efficiency flue gas treatment system is projected. The environmental impact study has been focused on the long-term aspect of the air pollution (chronic pollution) ...


    By Inderscience Publishers

  • Optimizing The Operation And Material Selection For Fluorinated Waste Gas Incineration

    A thermal oxidizer system is used by Honeywell Specialty Chemicals to reduce organic and acid gas emissions from their fluoro-products plant. The thermal oxidizer system consists of a multi-gas fired vortex burner mounted on a vertical residence chamber. ...

  • Process analytics in vinyl chloride monomer (VCM) plants – Case Study

    Vinyl chloride monomer (VCM), made from ethylene and chlorine by pyrolysis, is the feedstock for the production of the very common plastic material PVC. Modern VCM plants use integrated processes, combining endothermic and exothermic reactions in an almost energy balanced operation. Plants optimize the product quality, plant safety and cost efficiency by using advanced process control equipment ...

  • On-Site Incineration Tames Arsenal Waste Mixture

    Toxic wastes from various chemical processing activities at Rocky Mountain Arsenal (RMA) had accumulated in on-site evaporation basins over many years. The highly corrosive wastes, which posed environmental and potential health hazards, were by-products of the U.S. government’s chemical weapons program during World War 11 and its later weapons disposal program, as weIl as sorne pesticide ...


  • Case study - HMS Ocean Waste Incinerator

    Ship's Waste Incinerator This installation is Glosfume's first filter to be used at sea. Stringent laws prevent ships from dumping waste at sea, all waste has to be returned to its point of origin. The Royal Navy is one of the first to install an incinerator and filter onboard a ship. Extensive testing was carried out before fitting the unit to HMS Ocean; installation involved cutting a ...


    By Glosfume

  • Pollutant emissions from modern incinerators

    Emissions of dioxins are mainly from incinerators, domestic and industrial coal combustion, and traffic. However, the major public concern and research effort are associated with the emissions of organic micropollutants from waste incinerators. This paper gives a brief overview of the more recent research and development for the removal of dioxins and heavy metals from flue-gas streams. Special ...


    By Inderscience Publishers

  • A STIEFEL project Waste Incineration Plant (KVA) Trimmis case study

    The waste incineration plant (KVA) Trimmis is situated in the eastern part of Switzerland and is connected to the railway network. As it is the only incineration plant in this province, it serves a large area with approximately 131’000 inhabitants. The local authorities waste disposal association named GEVAG is a public body serving 43 convention communities and 97 associated municipalities ...


    By Jakob Stiefel GmbH

  • Supercritical water oxidation presented as alternative to incineration – An update

    Environmentally benign waste disposal is becoming a more and more acute problem. A process now being commercialised, supercritical water oxidation is demonstrating extremely efficient organic waste destruction (99.99%) plus excellent environmental characteristics (none of the emissions associated with incineration). The process is especially suitable for the treatment of wastewater and sludges ...


    By SCFI Group Limited

  • Case study - WID-compliant Wessex Incineration (UK)

    This installation was Glosfume's first use of a new process designed to incorporate an innovative 'radiant heating tube' which allows fumes to cool prior to filter without the need for dilution air and/or a heat exchanger. This design has subsequently been successfully utilised on several similar rotary incinerator installations. The plant was the first to comply with strict Waste Incineration ...


    By Glosfume

  • Contained Gas Rule Changes A Laymen`s Discussion On A Complicated Topic Today`s OXIDIZERS becoming Tomorrow`s INCINERATORS?

    New EPA regulations classifies "oxidizers" as "incinerators", meaning  if this is not changed, the emissions standards and regulatory requirements associated with operating oxidizers become much more complex because incineration rules specify extensive recordkeeping, monitoring and reporting requirements. Last month, when EPA released new rules affecting the combustion of solid wastes most ...

  • Multiple stage scrubbing and adsorption system for Incinerator exhaust at an industrial waste processing plant

    Challenge Monroe Environmental was called upon to purify a 20,000 CFM exhaust stream that was being discharged from an industrial waste incinerator at 2000° F. The pollutants that needed to be removed were: Fine Ash Particulate HCL Gas Mercury Dioxins The combination of soluble and solid pollutants, coupled with the ...

  • Coming along nicely our client travels from Jersey to inspect the progress of their new medical waste incinerator

    We’ve often talked about how most of the waste incineration plant we manufacture is either personally customised or are bespoke projects that have been individually designed and built to meet specific requirements.  When we are engineering ‘one-off’ units such as these it is quite normal for our clients to pay us a ...


    By Todaysure Matthews

  • QinetiQ – Modular EU Compliant incineration package - Case Study

    TodaySure™ were commissioned to construct an Integrated Battlefield Support System Incinerator as part of a Ministry of Defence funded research programme, to demonstrate that waste management can be achieved in a responsible way, compliant with challenging environmental standards. Designed to meet the stringent requirements of the EU Waste Incineration Directive, the combustion chambers, ...


    By Todaysure Matthews

  • Are incineration and landfills the answer to save us from the recycling crisis?

    For plastic recycling, this year hasn’t exactly been one of the best – what is to blame? Oil. Shockingly, it actually costs more to recycle old plastic than it does to make new in many ways. Petroleum prices have fallen so low, as low as 70% below the level in June 2014. This may be great for some – however with it has fallen the cost of Virgin Plastic which is made from ...


    By GPT Waste Management Ltd

  • Recycling Vs. Landfills and Incinerators – Do Benefits of One Outweigh the Other?

    Believing the 2011 survey results of the U.S Environmental Protection Agency (EPA), the American nationals generate more than 240 million tons of waste every year. Often referred to as Municipal Solid Waste, this waste originates from households, schools, hospitals, and business establishments. This trash material often finds its place in the wasteland, where it is either recycled, trapped in a ...

  • Zero Waste - Zero Waste - Zero Waste

    The Planning Group of the Zero waste International Alliance defines zero waste as: “Zero waste is a goal that is ethical, economical, efficient and visionary, to guide people in changing their lifestyles and practices to emulate sustainable natural cycles, where all discarded materials are designed to become resources for other use.” I recently posted this question on ...


    By ABCOV Companies , LLC

  • Greenhouse gas emissions from waste management-assessment of quantification methods

    Of the many sources of urban greenhouse gas (GHG) emissions, solid waste is the only one for which management decisions are undertaken primarily by municipal governments themselves and is hence often the largest component of cities’ corporate inventories. It is essential that decision-makers select an appropriate quantification methodology and have an appreciation of methodological ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you