waste gas stream Articles

  • Several waste gas streams: Highly contaminated oxygen-free waste gas, and medium waste gas stream - Case Study

    Example: Chemical industry Similar tasks: Petrochemical and pharmaceutical industries A producer of synthetic rubber creates a medium waste gas as well as a highly contaminated oxygen-free waste gas which contains primarily low hydrocarbons. The main waste gas stream is purified in a regenerative thermal oxidiser (RTO), while the oxygen-free waste gas passes through ...

  • Treatment of Oily-Waste Process Streams

    Standard oily-wastewater remediation relies on API 650 for oily-wastewater separation (O/W/S) treatment using gravimetric lagoon separation, then reprocessing the recovered floatable slop oil, followed by chemical flocculation, then reprocessing the recovered oily sludge, followed by dissolved air flotation (DAF), then using holdingpond clarification of supernatant wastewater, before ...


  • Developing a Novel Device for Accurate Biogas Concentration Measurement

    Due to increasing awareness on the impact of fossil fuels on the environment, and heavier taxes on carbon emissions there is a worldwide effort to seek renewable sources of energy – alternative energy sources that increase energy efficiency and security.  A renewable source that’s gained significant attention in recent years is biogas, one of the most ...


    By Edinburgh Instruments Ltd

  • Digester Developers Target Mixed Organic Waste Streams

     emerging group of commercial companies see a viable business opportunity in North America around building, owning and operating larger scale anaerobic digestion (AD) facilities to process mixed organic waste streams. In some instances, the projects being proposed and constructed only include anaerobic digester operations. In others, there is a combination of digestion with back-end ...


    By BioCycle Magazine

  • Several waste gas streams: Short, high concentration peaks and a constant medium concentration - Case Study

    Example: Production of synthetic resin Similar tasks: Chemical industry, batch processes in the pharmaceutical and plastics industry The production of high quality synthetic resin for marine paints and varnishes, coatings and repair materials, involves different waste gas streams. In addition to waste gas with a medium level of contamination, there is also a highly ...

  • Quantifying the impacts of co-digesiton of waste streams with sewage sludge

    In order to slow down the impending impacts of global climate change due to consumption of fossil fuels, governments are looking at ways to develop and incentivise alternative renewable energy sources. Subsequently, the UK has imposed renewable energy targets of 15% of all energy consumption by the year 2020, but admit that – in order to meet carbon dioxide reductions of 20% by 2020 – renewable ...


    By United Utilities

  • Turning Carbon Emissions Into A Revenue Stream

    On the heels of the EPA’s new carbon rules proposed by President Obama on June 2, I wanted to take a closer look at a potential disruptive technological breakthrough: taking CO2 waste streams and turning them into saleable, value-added feedstocks. Certainly, the deployment of renewables, energy efficiency, smart grid, and energy storage technologies offer some of the most cost-effective ...


    By GLOBE Foundation

  • Rapid Gas Chromatographic Technique for the Determination of HYDROGEN in Reactor & Process Streams and Fuel-Cell Systems

    HYDROGEN is the most prevalent Element in the Universe… the “essence of Star Stuff” according to the late, great Carl Sagan. It is the ultimate “clean” fuel, with WATER as the predominant waste product… though care must be taken to minimize its unfortunate tendency to cause explosions. Hydrogen is formed in Nuclear Reactors, from low-efficiency Hydrolysis, in smaller amounts from natural Bio-Mass ...


    By Buck Scientific Inc

  • Biological Removal of Ammonia from Contaminated Air Streams Using Biofiltration System

    ABSTRACT Ammonia is a colorless, toxic, reactive and corrosive gas with a sharp odor. It is irritating to the skin, eyes, nose, throat, and lungs. Ammonia gas occurs in the environment naturally and is emitted by many industries and, therefore, its control is essential. Biofiltration is a new emerging technology that is being used as a control procedure. This study evaluates the use of a ...

  • Landfill waste gas abatement - Case study

    For over 43 years Catalytic Products International has designed and manufactured specialized oxidation systems for use in controlling process-related VOC emissions. The QUADRANT-NRV Series Thermal Oxidation System is designed for use with the low-volume/high-BTU waste gas stream emitted from many landfill gas purification processes. As we utilize our Venturi Burner Package to process the waste ...

  • Process for the Separation of Gas Products from Waste Tire Pyrolysis

    In recent years, pyrolysis has proven to be an effective thermochemical process for the recycling of waste tires. After pyrolysis, three fractions are obtained:  carbonaceous solids, liquid hydrocarbons, and the so-called noncondensable gases. In this paper, the starting point is the pyrolysis reactor outlet that provides a gas stream with a temperature of 600 ...


  • Very large waste gas volumes with low contaminant concentration - Case Study

    Example: Electronics industry Similar tasks: Paint shops, spectacle coating, coating on the inside of cans The electronic industry produces semiconductors that generate very large waste gas streams that are only slightly contaminated. These waste gas streams are purified in rotary adsorbers. The continuous regeneration of the adsorbers generates highly contaminated ...

  • Waste Gas Cleaning for Road Tunnels and Underground Car Parks

    The objective of the study was to find a microbiological cleaning technique for road tunnel waste air, with emphasis on CO, NO and NO2. The chemolithotrophic CO oxidizing mixed population with an integral part of nitrifying bacteria carry out an essential step in metabolic process of NOx consumption. The immobilized microorganisms were subsequently exposing them to a constant stream of artificial ...


  • Evaluation of Priority Pollutant VOCs in Waste-Water and Solid Waste by EPA Method-624 Gas Chromatography

    Processing waste discharges, manufacturing effluents and sewage would not normally have been a problem 50 years ago, but the advent of almost unchecked industrial growth the latter half of the last century has created the POTENTIAL for a wide variety of characterized pollutants to enter the environment of any municipality. The toxic METALS are tested by approved State & Federal methods defined in ...


    By Buck Scientific Inc

  • Biofiltration systems for the treatment of waste gas from industrial plants

    Bord na Móna Environmental Ltd have considerable experience in the field of biological air filtration (600 installations). Initially, the majority of installations were on Municipal and Industrial Wastewater applications. This was quickly followed by Municipal Solid Waste, an application Bord na Móna jointly developed with its Italian partners Air Clean srl. Since 2000, Bord na Móna have ...


    By Anua - Bord na Móna Limited

  • Casella Waste Systems: Moving towards zero waste

    Started in 1975 as a single truck operation in Rutland, VT, Casella Waste Systems now stands as one of the leading waste and recycling companies in the U.S., employing more than 1,700 people. The company owns and/or operates 31 solid waste collection operations, 29 transfer stations, 17 recycling facilities, nine Subtitle D landfills, three landfill gas-to-energy facilities, one landfill ...


    By Waste Advantage Magazine

  • Waste Fuel Case History

    The Customer The company engages in the design, manufacture, and sale of machinery for decomposing petroleum-based materials. The company uses microwave technology for recovering hydrocarbons and fossil fuels from sources, such as tires, oil shale, capped wells, coal, automotive shredded residue, municipal solid waste, shale deposits, and waste oil streams. The ...

  • Defining solid waste

    Simultaneous to the publication of the final National Emission Standards for Hazardous Air Pollutants for Boilers (the Boiler NESHAP) and the Commercial and Industrial Solid Waste Incinerator (CISWI) Rules, EPA issued a new regulation that for the first time defines what materials are a non-hazardous solid waste when combusted. This rule, Solid Wastes Used as Fuels or Ingredients in Combustion ...


    By Trinity Consultants

  • Waste Management Solutions for Business

    How to win the race for everyone Waste Management Solutions for Business Industry will always lead the way in the adaptation of new technology, and especially the technology of conservation. This is not necessarily for any ideological reason, but because the people who manage water use better understand the economic incentives for adopting new ...

  • Hot Gas Decontamination

    Introduction: The process involves raising the temperature of the contaminated equipment or material to 260 °C (500 °F) for a specified period of time. The gas effluent from the material is treated in an afterburner system to destroy all volatilized contaminants. The method eliminates a waste that currently is stockpiled and requires disposal as a hazardous material. This method will permit ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you