waste handling Articles

  • Municipal waste management & handling

    Several MSW management practices, such as source reduction, recycling, and composting, prevent or divert materials from the wastestream. Source reduction involves altering the design, manufacture, or use of products and materials to reduce the amount and toxicity of what gets thrown away. Recycling diverts items, such as paper, glass, plastic, and metals, from the wastestream. These materials are ...


    By Jindal power ltd.

  • Turnkey waste handling systems

    The turnkey article discusses the ability of Reaction Distributing Inc. to design waste handling solid waste handling systems that are specific to our clients' individual needs.  The standard line of dry and wet waste compactors as well as the vertical and horizontal balers often form a large part of the overall process however.  It is our ability to analize, recognize and formulate new ...


    By Reaction Distributing Inc.

  • Waste paper handling – chuck the gaylord

    THE NICEST thing about Gaylord boxes...well, there are many. They cost next to nothing. Relative to the other beasts in your shop, they take up hardly any room. You don’t have to plug them in, so they don’t boost your electric bill. Yes, it’s high time the Gaylord got its due. Besides, in an economy like the one we’re still experiencing—and considering the George Washington hand-holding that’s ...


  • Environment friendly EPS handling turns waste to value

    Norlax earned a return on its investment in a RUNI SK370 and its housing within 2 years. On a good day, up to 1,000 boxes of salmon are fed into production at NORLAX A/S, Denmark. The huge quantity of EPS boxes used to fill 4 truckloads per day, which commuted constantly between the company’s premises and a waste handling company 30 km away. Nowadays, the boxes are compacted into ...


    By RUNI A/S

  • Waste handling systems for hygiene product manufacturers

    Valvan Baling systems is the preferred supplier for waste handling systems at several renowned hygiene product manufacturing companies. One of the largest producers of hygiene products, such as diapers and feminine care, has built a new state-of-the-art plant. All the trim waste from the production lines is handled through a waste handling system, built and installed by Valvan Baling ...


    By Valvan Baling Systems NV

  • Best Practices in Maintenance For Waste Handling Fleets

    With a fully operational, deployed and comprehensive maintenance software system, companies can increase their visibility to costs and operations performance. Business profitability is measured by a variety of factors, from the amount of sales and service income to decrease (or increase) in administrative and operating expenses. For waste handling companies, fleet maintenance can ...


    By Waste Advantage Magazine

  • Delitek Cleans up Marine Waste Handling

    Delitek AS is one of the world’s leading manufacturers of waste handling systems specially designed for use on board ships and offshore installations. Owners and operators across the globe rely on the Norwegian company’s technology to dispose of their waste in an environmentally responsible manner and in compliance with the latest regulations The very first waste handling system ...


    By Delitek AS

  • Rewair saves an hour a day on waste handling - Case Study

    RewAir A/S specialises in developing and producing glass fibre solutions that are used in the production of wind turbines. Yearly 60 tons of waste The glass fibre that is used in the production facility arrives at the factory in Haderslev, Denmark, in large rolls, on which the glass fibre is rolled together with a layer of protective paper. The roll is placed on a cutter, and when ...


    By Bramidan Balers

  • Compactor reduces waste handling, disposal cost for Furniture manufacturer case study

    S. Bent and Brothers Inc., a large New England furniture manufacturing company, has significantly reduced its hazardous waste handling and disposal costs by using a compaction machine built by Compacting Technologies International (CTI) of Portland, Ore. Roger R. LeBlanc, administrative assistant at S. Bent's Gardner, Mass., headquarters, reports tbat prior to installing the compactor in early ...


    By Waste Control Systems Inc

  • Sustainable sludge handling for the 21st Century

    Purification of municipal and industrial waste waters leads to the generation of a residue-called “excess sludge”. This material when mechanically dewatered is typically 75-90% water. The balance of the dewatered sludge consists of organic compounds (solid waste, biomass) and inert materials (sand, salts, and metals). These sludges have been to date dehydrated to reduce the aqueous fraction using ...


    By SCFI Group Limited

  • How To Handle Chemical Spills & Cleanups

    FAST-ACT is designed for liquid and vapor chemical releases, but the chemicals it attacks does not need to be limited to what we traditionally think of as a chemical spill. Toxic and noxious chemicals can come from a variety of sources such as waste water, decomposition, household chemicals, and animals. Since FAST-ACT can be applied to liquid spill or vapor release enabling Emergency Responders ...


    By Fast-ACT

  • How to Handle Chemical Spills in Laboratories

    Chemical Spill Response Products & Procedures The current political and world climate has forced the Emergency Response Community to take a closer look at the number of potential hazards that they may be called upon to deal with. Of particular concerns are the response to terrorist and/or chemical incidents. Depending on the type of event, responders may be faced with a myriad of ...


    By Fast-ACT

  • Analysis of the generation of household solid wastes, household hazardous wastes and sustainable alternative handling

    In the southern part of Mexico City, household solid wastes (HSWs) were examined qualitatively and quantitatively. The purpose of this work was to determine the dynamics of HSW and hazardous waste generation and create in households a responsible attitude towards environmental conservation. For this analysis, the population was categorised into three socioeconomic strata (lower, middle and ...


    By Inderscience Publishers

  • Biosolids sampling and handling approaches for microbial analyses

     ABSTRACT The protection of human health and the environment while making the use of biosolids products more practical is a joint goal of utilities and regulatory agencies. Assuring the safety of biosolids is paramount to gaining wide public acceptance of this waste-to-beneficial use product. Making effective decisions about the safety of biosolids use relies on quality data. Satisfying ...

  • Ecological solution of the problem of handling liquid radioactive wastes – LRW (by the example of FSUE SSC RF RIAR)

    A sharp reduction of nuclear waste amounts is possible if their elements are considered as source material of atomic complexes – SMAC. The prospect of their possible salvaging will require technological changes and ensuring safety of storage of the material till the need arises. Long experience in deep liquid radioactive waste disposal and accounting, calculations, and motivations demonstrate ...


    By Inderscience Publishers

  • Rapid assessment of occupational health and safety measures for personnel handling healthcare waste in the Gaza Strip, Palestine

    Proper healthcare waste (HCW) management practices and precautions are crucial to avoid occupational and environmental health problems amongst healthcare workers. This study aims to assess the occupational health and safety of healthcare workers involved in medical waste handling in two hospitals in the Gaza Strip, Palestine. This study was cross–sectional in design, and a simple random sampling ...


    By Inderscience Publishers

  • Major discount chain Leader Price found baler solution to handle their waste - Case Study

    When discount retail food chain giant, Leader Price, was looking for an efficient waste handling solution to replace their current rotocompactor, they chose Bramidan balers. Says Leader Price buyer, Mr Cresson, “Rotocompactors are an expensive investment requiring a full service contract as the machines need to be checked every quarter. That’s another 700€ per year for ...


    By Bramidan Balers

  • Improved Oil Handling and Disposal: Rocklea Diesel Injection Service

     Background Truck mechanical workshops use large quantities of oils. Over time, there is an inevitable build up of spillages to give the traditional image of a messy, dirty workshop environment. This is not desirable when working with diesel injection systems. A high level of cleanliness and precision is essential. Several staff members of Rocklea Diesel Injection Service are ...


  • BaSYS 8.0.2 – The Swiss pocket knife for handling sewer or fresh water networks

    An efficient and sustained management of sewer or fresh water systems is a significant task. Any problems with these systems can mean tremendous financial risk for owners and operators of these systems. Such problems can also present large environmental risks. To mitigate such risks a comprehensive application software is needed that can maintain such sewer and fresh water networks. Barthauer ...


    By Barthauer Software GmbH

  • Applying Rheological Techniques to Upgrade Anaerobic Digesters and Handle High Solids Concentrations

    The Orange County Sanitation District (OCSD) is implementing a Capital Improvements Program that includes upgrading their wastewater treatment Plant No. 1 in Fountain Valley, California to full secondary treatment. The expansion will increase both primary and secondary solids production. OCSD prepared a Long-Range Biosolids Management Plan that concluded the waste solids should continue to be ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you