waste handling system Articles

  • Turnkey waste handling systems

    The turnkey article discusses the ability of Reaction Distributing Inc. to design waste handling solid waste handling systems that are specific to our clients' individual needs.  The standard line of dry and wet waste compactors as well as the vertical and horizontal balers often form a large part of the overall process however.  It is our ability to analize, recognize and formulate new ...


    By Reaction Distributing Inc.

  • Municipal waste management & handling

    Several MSW management practices, such as source reduction, recycling, and composting, prevent or divert materials from the wastestream. Source reduction involves altering the design, manufacture, or use of products and materials to reduce the amount and toxicity of what gets thrown away. Recycling diverts items, such as paper, glass, plastic, and metals, from the wastestream. These materials are ...


    By Jindal power ltd.

  • Sludge Blanket Level Detection – making new process opportunities possible

    Much Pulsar's Self-Cleaning Viper Sludge Sensor of the demonstrating the effective maintenance-free solution. discussion around the way we deal with sewage sludge – the way it is moved around the process, the bellmouth valves and decant processes, the downstream treatment of the liquors, important issues around TOTEX and discharge Compliance, plus more recently the ...

  • Waste paper handling – chuck the gaylord

    THE NICEST thing about Gaylord boxes...well, there are many. They cost next to nothing. Relative to the other beasts in your shop, they take up hardly any room. You don’t have to plug them in, so they don’t boost your electric bill. Yes, it’s high time the Gaylord got its due. Besides, in an economy like the one we’re still experiencing—and considering the George Washington hand-holding that’s ...


  • What Is Zero Liquid Discharge and How Does It Work?

    Not every industrial facility that produces wastewater will require zero liquid discharge (ZLD). It is usually looked to as a last resort because it can be a complex process that requires a high initial investment. If a facility is located on a site that has severe water scarcity issues and/or astronomical discharge fees, it might be ...


    By SAMCO Technologies, Inc.

  • Sustainability isn’t for later. 10 ways any business can build a more credible sustainability story

    Sustainability isn’t a priority right now. We need a full sustainability strategy before we can start. I need to calculate what the ROI would be first. All of these are common objections to taking the first steps on any organization’s sustainability journey. In fact, credible sustainable action can be accomplished by organizations of any size and it doesn’t have to be costly or ...


    By Bullfrog Power Inc.

  • New ways for Metal Recycling

    REWAVE XRF 3-way-sorting in innovative  “Free-Fall”-design Recycling of metal and aluminium knows no limits because it can be remelted as scrap indefinitely. Metals, however have to be separated from non-metallic impurities, and different metals have to be sorted in pure fractions to be used as secondary raw materials substituting primary resources. Especially when it ...

  • Delitek Cleans up Marine Waste Handling

    Delitek AS is one of the world’s leading manufacturers of waste handling systems specially designed for use on board ships and offshore installations. Owners and operators across the globe rely on the Norwegian company’s technology to dispose of their waste in an environmentally responsible manner and in compliance with the latest regulations The very first waste handling system ...


    By Delitek AS

  • Best Practices in Maintenance For Waste Handling Fleets

    With a fully operational, deployed and comprehensive maintenance software system, companies can increase their visibility to costs and operations performance. Business profitability is measured by a variety of factors, from the amount of sales and service income to decrease (or increase) in administrative and operating expenses. For waste handling companies, fleet maintenance can ...


    By Waste Advantage Magazine

  • Compactor reduces waste handling, disposal cost for Furniture manufacturer case study

    S. Bent and Brothers Inc., a large New England furniture manufacturing company, has significantly reduced its hazardous waste handling and disposal costs by using a compaction machine built by Compacting Technologies International (CTI) of Portland, Ore. Roger R. LeBlanc, administrative assistant at S. Bent's Gardner, Mass., headquarters, reports tbat prior to installing the compactor in early ...


    By Waste Control Systems Inc

  • How To Handle Chemical Spills & Cleanups

    FAST-ACT is designed for liquid and vapor chemical releases, but the chemicals it attacks does not need to be limited to what we traditionally think of as a chemical spill. Toxic and noxious chemicals can come from a variety of sources such as waste water, decomposition, household chemicals, and animals. Since FAST-ACT can be applied to liquid spill or vapor release enabling Emergency Responders ...


    By Fast-ACT

  • How to Handle Chemical Spills in Laboratories

    Chemical Spill Response Products & Procedures The current political and world climate has forced the Emergency Response Community to take a closer look at the number of potential hazards that they may be called upon to deal with. Of particular concerns are the response to terrorist and/or chemical incidents. Depending on the type of event, responders may be faced with a myriad of ...


    By Fast-ACT

  • Zero discharge system handles german power station’s fgd wastewater

    Evaporator/Crystallizer Combined with Salt Exchange Pretreatment is the Answer for this Demonstration Plant. The Facility A major European utility has several power block units fitted with wet limestone FGD scrubbers at their 600 MW power station in southern Germany. The blowdown from the scrubbers is treated to remove the heavy metals and suspended solids. The ...

  • Casella Waste Systems: Moving towards zero waste

    Started in 1975 as a single truck operation in Rutland, VT, Casella Waste Systems now stands as one of the leading waste and recycling companies in the U.S., employing more than 1,700 people. The company owns and/or operates 31 solid waste collection operations, 29 transfer stations, 17 recycling facilities, nine Subtitle D landfills, three landfill gas-to-energy facilities, one landfill ...


    By Waste Advantage Magazine

  • Development of the RAW and SNF handling system in the Federal Atomic Energy Agency and in the Russian Federation

    The experience the Russian Federation has gained over the period longer than half a century in handling radioactive wastes (RAW), including their burial in geological formations, is quite unique. These guidelines state the necessity of establishing an integrated state RAW and spent nuclear fuel (SNF) handling system, ensuring safe, effective, efficient, and socially-acceptable development of ...


    By Inderscience Publishers

  • Applying Rheological Techniques to Upgrade Anaerobic Digesters and Handle High Solids Concentrations

    The Orange County Sanitation District (OCSD) is implementing a Capital Improvements Program that includes upgrading their wastewater treatment Plant No. 1 in Fountain Valley, California to full secondary treatment. The expansion will increase both primary and secondary solids production. OCSD prepared a Long-Range Biosolids Management Plan that concluded the waste solids should continue to be ...

  • BaSYS 8.0.2 – The Swiss pocket knife for handling sewer or fresh water networks

    An efficient and sustained management of sewer or fresh water systems is a significant task. Any problems with these systems can mean tremendous financial risk for owners and operators of these systems. Such problems can also present large environmental risks. To mitigate such risks a comprehensive application software is needed that can maintain such sewer and fresh water networks. Barthauer ...


    By Barthauer Software GmbH

  • Improved Oil Handling and Disposal: Rocklea Diesel Injection Service

     Background Truck mechanical workshops use large quantities of oils. Over time, there is an inevitable build up of spillages to give the traditional image of a messy, dirty workshop environment. This is not desirable when working with diesel injection systems. A high level of cleanliness and precision is essential. Several staff members of Rocklea Diesel Injection Service are ...


  • Sample Handling Strategies for Accurate Lead-In-Soil Measurements in the Field and Laboratory

    ABSTRACT The inhomogenous lead-in-soil matrix can present serious obstacles to accurate sample collection and handling. In typical lead-in-soil measurement, particle size related errors in sampling and sample handling often exceed all other sources of error. The magnitude of error can vary widely depending on the particulate nature of the lead contaminant and the effectiveness of control ...

  • Waste not, want not

    New CDE sand washing plant produces high-quality building materials from 50-year-old waste in Estonia’s capital,Talinn Estonian company Paekivitoodete Tehase (Limestone Products) have recently purchased a CDE sand washing plant to process a material that had previously been stockpiled as waste because of its high clay content. As a result, this same material is now being sold to the ...


    By CDEnviro

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you