waste handling transportation Articles

  • Transportable Waste Reduction Technology

    Several recent technological innovations have found their way onto Transportable Shredding Systems manufactured by Shred-Tech Inc. Reduction engineers have worked for years to find the right combination of knife material toughness, resistance to abrasive wear and shock load deformation. Shred-Tech’s engineers have found the right combination, which employs state of the art alloy plate and ...


    By Shred-Tech Corp.

  • Waste handling systems for hygiene product manufacturers

    Valvan Baling systems is the preferred supplier for waste handling systems at several renowned hygiene product manufacturing companies. One of the largest producers of hygiene products, such as diapers and feminine care, has built a new state-of-the-art plant. All the trim waste from the production lines is handled through a waste handling system, built and installed by Valvan Baling ...


    By Valvan Baling Systems NV

  • Why waste management

    Since 1973 we are a part of environmentally friendly and economical shredding systems for all types of waste. Since 1973 MERCODOR GmbH Sondermaschinenbau KG (Special Products), Frankfurt/Main, The company’s shredding systems are used for the reduction of waste volume in various commercial and industrial applications, including hotels, hospitals, commercial kitchens and cruise ...

  • Waste not, want not

    Consultant Andy Ive considers solutions which not only comply but also enhance the environmental profile of today’s industrial companies. Until recently the prevailing perception in many industries, particularly those operating in emerging market areas has been that waste is an unwelcome inconvenience. The primary infrastructure of most companies was fundamentally not designed to deal with waste ...


    By Ive Design

  • Wood waste product

    A landfill needed a way to reduce their waste stream volume, increase the life of their landfill, and recover a recyclable, marketable product. Wood and yard waste material comprise up to 20% of their entire waste stream volume. Processing and recycling this material will extend the life of the landfill by 20 years. They chose WSM's Model 4864BH Horizontal Hogging System with a customized feed ...

  • Tackling waste in the sands of the Sahara

    When gas was discovered in the mid Sahara areas of North Africa in the 1990s Andy Ive was asked by BP to help set up the water and waste infrastructure for what amounted to four small towns 600 km into the desert. No local infrastructure at all existed for the waste and water to be produced by 2-3000 workers. IVE overcame sandstorms, extreme heat, poisonous snakes and patented a novel solution to ...


    By Ive Design

  • Hazardous waste disposal in the UK

    Custom and practice have exerted a powerful influence on waste management in the UK. A notable feature is the role of local government, which remains dominant despite expanding legislation and the increasing technical complexity of waste management. The private sector has long had a major role in the transporting and disposal of hazardous waste. The Environmental Protection Act of 1990 ...


    By Inderscience Publishers

  • Make money out of your waste

    Strautmann Umwelttechnik compacts Styrofoam® up to 700kg/m³ Make money out of your waste with balers from Strautmann Umwelttechnik. Week by week, there are many thousand of tons of waste which arise from packaging material and insulation material, which comes from expanded polystyrene, short EPS, like Styrofoam®. In the 90s the disposal of this very voluminous material was very ...

  • Marine Waste Management

    The Reasons of Marine Waste Management New rules from IMO (International Maritime Organization), adopted in July 2011, imply substantial changes for all ship or rig types as early as January 2013. By applying waste management, the ship or rig owner or operator takes control of waste handling with the aim of achieving some or all of the following objectives: 1) To fulfill ...

  • It is time to end food waste

    Food waste is a global, billion-dollar problem. The White Paper ‘It’s time to end food waste’ explores the origins, the reasons and some exciting solutions for the global food waste problem. Supercharged composters, mini-ventilators, smart lipid films are just some of the solutions to reduce the 1.3 billion tons of food that is currently wasted. Scientists and entrepreneurs ...


    By TOMRA Sorting GmbH

  • Waste management in a tropical forest - Case Study

    Waste Challenge: A mine under construction in a lush tropical forest has operations that are spread over a large distance from the port to the mine. Incoming supplies, and thousands of construction workers living and working on-site, generate significant amounts of waste. Location: Central American Country ECO Solution: Two Eco Waste Oxidizers ...


    By Eco Waste Solutions

  • Reducing Waste Management Costs

    Incineration is a viable alternative to Landfill. Business costs seem to be increasing all the time and waste disposal can be very expensive. There has been a dramatic rise in the cost of waste disposal in recent years with landfill costs in the UK reaching ...


    By Inciner8 Limited

  • Peace of mind for waste management drivers

    Smooth running tires assure peace of mind for drivers concerning their vehicles. Tire Pressure Monitoring Systems (TPMS) constantly monitor tire pressures and warn of low tire pressures. Only about 10 percent of tire-induced breakdowns are due to sudden tire damage; the remaining 90 percent start with slow leaks. However, drivers usually notice this gradual air loss too late, and more serious ...


    By Waste Advantage Magazine

  • Well suited for dust and waste products from airlaid production

    Less dust, easier handling and reduced transport costs. The RUNI Screw Compactor represents a great advance in airlaid production waste management. Dan-Web in Aarhus produces machinery and equipment for the manufacture of airlaid products such as nappies, sanitary towels, bed sheets and meat pads – primarily as turn-key production systems. The company has its own pilot system for client ...


    By Runi A/S

  • Moving difficult-to-handle bulk materials with flexible screw conveyors

    Flexible screw conveyor systems can be engineered to transport bulk materials that tend to pack, cake, smear, break apart or fluidize, and can prevent the separation of blended products. Flexible screw conveyors (Fig. 1) are suitable for most bulk materials, from sub-micron powders to large pellets, both free-flowing and non-free flowing. They are capable of conveying bulk materials at any angle ...


    By Flexicon Corporation

  • Fluid waste management and disposal practices

    Prior to the early 80s and the introduction of AIDS into our society, infection control practices were designed almost exclusively to protect the patient from developing a nosocomial infection an infection acquired after admission to the hospital. Protocols were focused on protecting the patient, with little or no emphasis on the health care workers potential to become infected. Hepatitis B has ...

  • Landfills: Alaska begins its future of solid waste management

    It seems only fitting that the state earning the moniker as the last frontier might be slightly behind the times when it comes to managing solid waste. Alaska celebrated 50 years of statehood last year, and while many gathered at picnics and other events to lionize improvements to the state’s scant matrix of roads, and the construction of schools, airports and medical facilities, solid ...


    By Waste Advantage Magazine

  • Municipal solid waste management in Jodhpur city, Rajasthan (India) - current status

    Jodhpur city is the second largest city of Rajasthan State, having population of about 1,077,717 and an area of 232 sq km. The city generates around 380 t/d of municipal solid waste (MSW). With the increase in population, urbanisation and industrialisation, the problems of handling MSW have significantly increased in the past few years. There is no arrangement for segregation of waste at source. ...


    By Inderscience Publishers

  • Managing medical waste technology: how US hospitals adapted to change

    A total of 78 US hospitals responded to a survey in a nation-wide sample for the purpose of analysing their medical waste technology management practices under changing laws and regulations in the early 1990s. Findings show that 77% of these hospitals implemented changes in one or more of their operations in storage, treatment, handling, transport and disposal of medical waste and staff ...


    By Inderscience Publishers

  • MB Crusher to slash cost of waste disposal

    Disposal of demolition or construction waste is a common cost element facing many contractors, particularly in our major cities where significant landfill charges are applicable. It’s not only landfill charges that cost. When truck fuel, road tolls, operator time and project downtime are considered, the costs really add up. Disposal of small lots can also be annoying as these stockpiles ...


    By MB Crusher

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you