waste heat flow Articles

  • Determining Proper Cooling Tower Size

    To maximize water-based cooling tower benefits, the appropriate tower size must be selected, requiring the identification of several critical factors. Cooling towers are a relatively inexpensive and reliable way of expelling heat from a number of industrial processes, including nuclear & thermal power plants, petroleum refineries, petrochemical plants, food processing plants, as well as HVAC ...


    By Delta Cooling Towers, Inc

  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • Heating value

    The CustomerThis Chemical Company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The ProcessThe company uses flare stacks to dispose of the waste products ...

  • Coupled Heat and Moisture Flow in Unsaturated Swelling Clay Barriers

    The main thermodynamic forces active in the near field of a nuclear fuel waste multiple barrier system during the unsaturated stage are the gradients of temperature, fluid pressure, and chemical potentials. The processes that have a direct impact on the transport mechanism of heat and moisture within the clay-based compacted buffer material are coupled. The major problems in describing coupled ...


    By ASTM International

  • Heat recovery from wastewater

    Heat recovery from gray water is particularly important in water-intensive industries such as pulp and paper plants, dairies and breweries. Rather than flushing used water down the drain, consider whether a heat exchanging system can help you put that energy to work in your process again. Most plant operators arc aware of the need to save money and reduce the environmental impact of their plant ...


    By DDI Heat Exchangers Inc.

  • Heat Pumps – FAQs

    1. What is a Heat Pump? To put it simply; ground source heat pumps and geothermal heat pumps produce high grade heat from low grade heat which is found in the earth and our atmosphere.2. How does a Heat Pump Work?Heat pumps work in exactly the same way as air conditioners or refrigerators, but in reverse! Heat pumps capture latent energy which is stored in sources such as air, water and earth. ...


    By ICS Cool Energy Ltd.

  • Heat recovery system at a flooring manufacturer

    Flooring Manufacturer Reduces Operating Costs with a Customized Heat Recovery System Rising energy costs effect your bottom line. You don’t have to be a CFO to understand that energy costs are high and show little sign of relief these days. To combat the rising cost of natural gas, many companies that operate air pollution control systems are beginning to look at methods that economically ...

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Thermodynamic analysis of efficient recovery and utilisation of waste heat resources during sintering process

    Efficient recycling and utilisation of waste heat resources are among the primary methods in saving energy during sintering process, as waste heat resource recycling and utilisation are essentially energy conversion process. The purpose of this study is to analyse energy conversion and utilisation during the sintering process, and waste heat resources in each subsystem during the sintering ...


    By Inderscience Publishers

  • A novel cogeneration cycle based on a recompression supercritical carbon dioxide cycle for waste heat recovery in nuclear power plants

    In this study, a novel cogeneration cycle based on the recompression S–CO2 Brayton cycle is proposed, analysed and optimised thermodynamically to utilise the waste heat from a nuclear power plant. The cycle was constructed theoretically on the basis of a transcritical CO2 power cycle and a LiBr/H ...


    By Inderscience Publishers

  • Green machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C ElectraTherm’s ...


    By ElectraTherm

  • Case study - Green Machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C Date Commissioned: Q2 ...


    By ElectraTherm

  • Spilled heavy grade heating oil case study

    Heavy fuel oil escaped from a storage tank and entered the drainage system of a large creamery. This material passed to the aerated balance tank which precedes an activated sludge system treating the factory waste waters. Alerted to the spillage the operators were able to shut off the flow to the activated sludge system but not before a significant quantity of oil had passed through. Bio-Systems ...


    By Bio Systems Europe

  • Case study - Air-to-air heat exchanger provides plant heat and big savings

    OVERVIEW A food processing facility installed a new Regenerative Thermal Oxidizer (RTO) for odor control from its roasting operation.  The oxidizer was designed for 95% thermal rate of efficiency and included supplemental fuel injection (SFI) which is used during low VOC loading conditions, to help save fuel cost.  The customer was looking at additional ways  to further ...

  • ElectraTherm enters Canada’s natural gas compression market converting waste heat to power at a natural gas compressor station - Case study

    ORC Application on a Waukesha 7042 Site: Alberta, Canada Gross Power Output Avg: 90kWe Hot Water Input Range: 110°C Hot Water Flow: 11 l/s ElectraTherm partnered with ConocoPhillips to install two Green Machines at a natural gas compression station in Cessford, Alberta, Canada. The two Green Machine 4400s, ElectraTherm’s ORC generators producing electrical output up to ...


    By ElectraTherm

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Turning waste into power

    Economic, social and environmental factors dictate the necessity to manage waste to a new level. Wastewater plants, landfills, farms and food plants are all the owners of biomass that can be digested to produce biogas and turned into power. Biogas can be burned directly in boilers for heat recovery and used for manufacturing, heating or cooling; this is the simplest method of direct biogas ...


    By Hurll Nu-Way

  • Overbands supplied to SB Waste

    Master Magnets Ltd has recently supplied a permanent and an electro Overband Magnet to a major waste recycling company in Wolverhampton known as SB Waste Management & Recycling Ltd. SB Waste Management & Recycling Limited is one of a largest independent skip hire and recycling companies and was established in 1984. They have vast experience in the recycling industry collecting construction and ...


    By Master Magnets Ltd

  • Waste Management Solutions for Business

    How to win the race for everyone Waste Management Solutions for Business Industry will always lead the way in the adaptation of new technology, and especially the technology of conservation. This is not necessarily for any ideological reason, but because the people who manage water use better understand the economic incentives for adopting new ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you