waste heat power Articles

  • Utilizing Waste Heat For Power

    Continuous duty gen-sets provide base-load power generation in diverse applications around the globe. However, high fuel costs and engine maintenance are pain points felt by operators. A low-maintenance path to significant fuel savings and lower emissions is what the U.S. Department of Defense (DOD) had in mind when they approached ElectraTherm to integrate the company’s Green Machine waste ...


    By ElectraTherm

  • Is waste heat the silver bullet?

    The energy industry tends to get stuck on certain words. Silver bullet is one of them. Insiders and policymakers often like to say there is no silver bullet to fix US energy woes. We need a portfolio of solutions – renewables, efficiency, smart grid, transmission expansion, coal sequestration, etc. That may be true, but Tom Casten begs to differ. Casten is a bit of a rock star in the field of ...

  • Combined Heat and Power (CHP) essentials

    'CHP essentials' introduces the concept of power and heat 'production possibility sets', starting at the cradle of CHP, i.e., the thermal power generation plant. The latter always occasions 'fatal' heat that is either recovered (the 'merit' of CHP) or wasted (condensing). This split paves the way to defining the production possibility sets of CHP plants, shown for steam turbines, internal ...


    By Inderscience Publishers

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Using biogas for combined heat and power

    An integral part of the majority of anaerobic digestion facilities across the world is the CHP combined heat and power (CHP) engine. For the first time builder of a biogas plant, it is often neglected as the focus is on reducing the capital costs ...


    By Clarke Energy

  • Basin Electric - wind and waste heat

    Location: Waste Heat Recovery projects in Culbertson, MT and Garvin, MN – Wind Projects Located in South Dakota and North Dakota Project Start Dates: 2009 – 2011 Element Markets is helping Chevrolet meet its CO2 reduction goal, and simultaneously helping a large Midwest power cooperative earn revenues needed to support its clean energy projects. This ...


    By Element Markets LLC

  • Combined Heat and Power – Questions and Answers

     1. What are the benefits of CHP for business?   combined heat and power (CHP) is a well-proven technology, recognised worldwide as a cleaner alternative to traditional centralised generation. Its long-term future in the global energy markets is secured by CHP's ability to provide a multitude of financial, ...


    By ENER-G

  • Turning waste into power

    Economic, social and environmental factors dictate the necessity to manage waste to a new level. Wastewater plants, landfills, farms and food plants are all the owners of biomass that can be digested to produce biogas and turned into power. Biogas can be burned directly in boilers for heat recovery and used for manufacturing, heating or cooling; this is the simplest method of direct biogas ...


    By Hurll Nu-Way

  • Small-scale heat and power at B.C. mills

    Fred Scott introduced the B.C. Bioenergy Network (BCBN) as an alliance between Pristine and Nexterra Energy Corp. BCBN is a network of 15–20 individuals, with 10 MW power plants located across B.C. at mill operations in forest communities. Nexterra has developed a proprietary gasification technology that “takes wood waste material and [produces] clean burning synthetic gas or syngas,” Scott said. ...

  • Marketing Analysis of Low Temperature Waste Heat Boiler

    Environmental pollution brought by the burning of fossil fuels and improper energy use structure have became big problems of boiler manufacturer like ZG. To need the market demand for the development of new energy and renewab ...


  • Enhancing the dynamic performance of electricity production in steam power plants by the integration of transient waste heat sources into the feed-water pre-heating system

    Since the deregulation of the energy market the enhancement of steam power plant's dynamic performance has become more and more important. Nowadays, peak load is a profitable product at the energy stock markets if it can be provided reliably. This is in contrast to many power plants running constantly at full load. A very promising technique to improve the peak load capability of such power ...


    By Inderscience Publishers

  • Case study - Green Machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C Date Commissioned: Q2 ...


    By ElectraTherm

  • Green machine generates power from waste heat at biogas facility in the Czech Republic

    Biogas/Heat-to-Power Application on Two MWM Internal Combustion Engines Site: Brno, Czech Rep. Engine Max Power: 980kWe (currently limited to 900 kWe) Green Machine Gross Power Output Avg:  32-39 kWe Thermal Input to the Green Machine: 375-500kWt Hot Water Input Range: 86 - 92°C Hot Water Flow: 35 m3/hour Ambient Temperature: 0-25°C ElectraTherm’s ...


    By ElectraTherm

  • A novel cogeneration cycle based on a recompression supercritical carbon dioxide cycle for waste heat recovery in nuclear power plants

    In this study, a novel cogeneration cycle based on the recompression S–CO2 Brayton cycle is proposed, analysed and optimised thermodynamically to utilise the waste heat from a nuclear power plant. The cycle was constructed theoretically on the basis of a transcritical CO2 power cycle and a LiBr/H ...


    By Inderscience Publishers

  • Combined heat & power is a clean, efficient and economic energy solution

    The 21st century has highlighted a need for clean, efficient and economic energy, which has put Combined Heat & Power (CHP) into the limelight. By providing on-site power generation, waste heat recovery and system integration, CHP offers a realistic, near-term solution for exceptional energy efficiency and emission reduction. CHP systems can generate electricity locally while they recover ...


    By Shenton Group

  • Nuclear desalination by waste heat utilisation in an advanced heavy water reactor

    The use of thorium for nuclear power generation is an important element of the Indian atomic energy programme. The design and development of the Advanced Heavy Water Reactor (AHWR) is a step in this direction. Intensive design activity is underway to set up a 300-MWe AHWR. The design of the AHWR incorporates several features to simplify the design and to eliminate certain systems and components, ...


    By Inderscience Publishers

  • Case-study - Utilising waste heat for water production and climate control

    Water purification is needed to produce high quality water for consumption, agriculture and industrial needs. Conventional water treatment processes, like distillation and reverse osmosis, consume vast amounts of energy. However, there is a large potential for significant reductions in energy consumption and CO2 emissions in this sector. It can be achieved by the exploitation of waste heat for ...


    By Climate-KIC

  • ElectraTherm enters Canada’s natural gas compression market converting waste heat to power at a natural gas compressor station - Case study

    ORC Application on a Waukesha 7042 Site: Alberta, Canada Gross Power Output Avg: 90kWe Hot Water Input Range: 110°C Hot Water Flow: 11 l/s ElectraTherm partnered with ConocoPhillips to install two Green Machines at a natural gas compression station in Cessford, Alberta, Canada. The two Green Machine 4400s, ElectraTherm’s ORC generators producing electrical output up to ...


    By ElectraTherm

  • Seawater desalination utilising waste heat by low-temperature evaporation

    Utilisation of waste heat is one of the ecofriendly ways to produce low-cost desalted water. Keeping this in mind, Low-Temperature Evaporation (LTE) desalination technology utilising low-quality waste heat in the form of hot water (as low as 50?C) or low-pressure steam (0.13 bar) has been developed to produce high-purity water (conductivity ...


    By Inderscience Publishers

  • Case study - Heat-to-power application using a Dreyer & Bosse CHP power unit with an internal combustion engine

    Location: Trechwitz, Germany Site Gross Power Output Range 500kWe + 30-35kWe from ElectraTherm ORC Thermal Heat Input Range:  375-450kWt Hot Water Input Range:  90-95°C (118-203°F) Hot Water Flow Range:  39 m3/hour (172 GPM) Ambient Temperature: 0-15°C (32-59°F) ElectraTherm installed a Green Machine in Germany at a biogas power generation ...


    By ElectraTherm

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you