waste heat recovery system Articles

  • Heat recovery system at a flooring manufacturer

    Flooring Manufacturer Reduces Operating Costs with a Customized Heat Recovery System Rising energy costs effect your bottom line. You don’t have to be a CFO to understand that energy costs are high and show little sign of relief these days. To combat the rising cost of natural gas, many companies that operate air pollution control systems are beginning to look at methods that economically ...

  • Heat recovery from wastewater

    Heat recovery from gray water is particularly important in water-intensive industries such as pulp and paper plants, dairies and breweries. Rather than flushing used water down the drain, consider whether a heat exchanging system can help you put that energy to work in your process again. Most plant operators arc aware of the need to save money and reduce the environmental impact of their plant ...


    By DDI Heat Exchangers Inc.

  • Get 46% FREE Energy with Waste Heat Recovery

    Kaojai Green can show you how a simple waste heat recovery system can produce up to 46% of usable heat energy and energy performance benefit! Read on to see how… First let’s get a little technical and look at how we “can” do this… In waste heat recovery systems the “Art of Energy Recovery” or ...


    By Kaojai Green Energy

  • Thermo–economic analysis of heat pipe heat exchanger for waste heat recovery in thermal systems

    Thermo–economic analysis of Heat Pipe Heat Exchanger (HPHE) for waste heat recovery in thermal systems using the P1–P2 and NTU methods is presented. The optimum effectiveness of a HPHE is given as a polynomial equation, whereas the net savings and payback period are given in closed form to enable the HPHE designer to determine the optimised values directly. In addition to this, exergy analysis of ...


    By Inderscience Publishers

  • Real Time TOC Analysis in Steam and Condensate

    Executive Summary Steam in petro/chemical plants could be contaminated with hydrocarbons (TOC = Total Organic Carbons) from various sources. In any case this is a sign for defects in the process, whether it they occur in the heat exchanger, the blow down vessel, the condensate recovery or other parts of the system. Conventional solutions to monitor such contaminations use TOC- ...


    By JCT Analysentechnik GmbH

  • A study on the thermodynamic analysis of a cascaded latent heat storage system over the single storage tank system for diesel engine waste heat recovery

    This article presents the comparison of performance of a cascaded Latent Heat Storage (LHS) system over the Single Storage Tank (SST) system for heat recovery from a diesel engine. The energy and exergy saved and efficiencies during the charging process are evaluated and reported using actual system data. The discharge process is analysed with a case study and it is concluded that it is possible ...


    By Inderscience Publishers

  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • Case study - Waste heat generates steam and savings

    OVERVIEW A coil coating facility purchased a new a 15,000 SCFM Regenerative Thermal Oxidizer (RTO) which had a nominal heat transfer efficiency rate of 90% thermal energy recovery. It was designed with supplemental fuel injection (SFI) which is used during low VOC loading conditions, to help save fuel cost.  The facility was looking for additional ways to decrease their exhaust ...

  • Flooring manufacturer reduces operating costs with a customized heat recovery system - Case Study

    Rising energy costs effect your bottom line. You don’t have to be a CFO to understand that energy costs are high and show little sign of relief these days. To combat the rising cost of natural gas, many companies that operate air pollution control systems are beginning to look at methods that economically recover heat for use somewhere else in their manufacturing operations. One leading ...

  • WEISS provides for the heat - and disposes of the waste case study

    The very first time PLIMOB learnt about Weiss was in 1995 at which time contacts at IKEA told about combustion plants from WEISS. IKEA is the most important customer for PLIMOB so the management listened to the recommendations. PLIMOB is producing wood furniture; large quantities of wood chips and sawdust are a spin-off effect from their production. Traditionally wood-working industries – ...


    By WEISS A/S

  • Thermal Treatment Of Halogenated Inorganic Aqueous Waste With Energy And By-Product Recovery

    This paper describes the incineration technology used to safely destroy the liquid and gaseous wastes containing inorganic salts generated by Bulk Pharmaceutical and agrochemical industries. The plants are supplied with dedicated downstream Air Pollution Control System (APC) or energy recovery where applicable. Due to the emergence of new products and increased production in Pharmaceutical and ...

  • Mercury recovery from industrial waste and toxic residues of natural gas drilling

    econ's client in the east of Germany is one of the few specialised companies in Europe for the treatment of mercury contaminated waste. Typical input material for this type of treatment is sludge from the natural gas industry or other residues from chemical processes, i.e. contaminated filter cake from waste water treat-ment. Among their most important clients are Shell, ExxonMobil, Wintershall ...


    By econ industries GmbH

  • Power Positive Resource Recovery

    Using laws of thermodynamic analysis to evaluate the energy and power characteristics of wastewater and beneficial uses of biogas offers greater insight into best business practices and what is achievable. Growing numbers of waste-water treatment plants (WWTP) are striving to produce more power onsite. In recent years, there’s even been a race among WWTP operators to see who can ...


    By BioCycle Magazine

  • Two-Stage Combustion of High-PVC Solid Waste With HCL Recovery

    Untitled Document Abstract A waste-to-energy process based on high-PVC solid wastes is discussed. The basis is that at 200-400°C the PVC fraction decomposes ...

  • Energy Recovery Solution from the Wasted Grey Water - Case Study

    Energy Recovery Solution from GREY Wasted Water in Large Condos or Hotels, or in WTP or from City Sewage pipes flowing under the street. The Energy Recover Solutions are Patented Technology with Major Benefits in different markets A practical solution to save ...


    By DDI Heat Exchangers Inc.

  • Maximizing Energy Recovery through Digester Gas Management System Enhancement

    ABSTRACTAdvanced anaerobic digestion practices and maximum energy recovery call for a digester gas system that reliably allows for complete biogas collection and utilization. This paper will describe the planning, design, and construction of a new digester gas management system at the East Bay Municipal Utility District’s (District) Main Wastewater Treatment Plant. The need for an upgraded ...

  • Case study - Oxidizer energy recovery options

    Overview The mainstream media today is full of allusions to energy awareness and conservation. Just as visible these days are media references to astronomical dollar figures that can boggle the mind. This article does not seek to break out of that mold, but rather to conform to it – as Oxidizer Stack Heat Recovery offers a tremendous opportunity for both energy conservation and ...

  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


  • Chemical recovery - Recycle Fluid Technologies, Inc. - case study

    Application Recycle Fluid Technologies, Inc., of Richland Michigan recovers ethylene glycol of higher purity and greater volumetric yield. The recovered product must meet stringent General Motors and ASTM Standards. Waste Description The used ethylene glycol contains inhibitor salts, ash, dissolved metals, organic acids, motor oils and other variable ...


  • Drilling oil recovery from drill cuttings case study

    By econ industries VacuDry indirect heated thermal desorption Drill cuttings are an increasing waste stream worldwide, econ industries addressed the challenge by developing a process that cleans the waste and at the same time recovers valuable drilling oil. The VacuDry plant started the successful processing of drill cuttings in autumn 2013. Our client, a medium-sized recycling company, was new ...


    By econ industries GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you