waste heat solution Articles

  • Is waste heat the silver bullet?

    The energy industry tends to get stuck on certain words. Silver bullet is one of them. Insiders and policymakers often like to say there is no silver bullet to fix US energy woes. We need a portfolio of solutions – renewables, efficiency, smart grid, transmission expansion, coal sequestration, etc. That may be true, but Tom Casten begs to differ. Casten is a bit of a rock star in the field of ...

  • Basin Electric - wind and waste heat

    Location: Waste Heat Recovery projects in Culbertson, MT and Garvin, MN – Wind Projects Located in South Dakota and North Dakota Project Start Dates: 2009 – 2011 Element Markets is helping Chevrolet meet its CO2 reduction goal, and simultaneously helping a large Midwest power cooperative earn revenues needed to support its clean energy projects. This ...


    By Element Markets LLC

  • Waste Management Solutions for Business

    How to win the race for everyone Waste Management Solutions for Business Industry will always lead the way in the adaptation of new technology, and especially the technology of conservation. This is not necessarily for any ideological reason, but because the people who manage water use better understand the economic incentives for adopting new ...


  • Heating value

    The CustomerThis Chemical Company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The ProcessThe company uses flare stacks to dispose of the waste products ...

  • Case study - Waste heat generates steam and savings

    OVERVIEW A coil coating facility purchased a new a 15,000 SCFM Regenerative Thermal Oxidizer (RTO) which had a nominal heat transfer efficiency rate of 90% thermal energy recovery. It was designed with supplemental fuel injection (SFI) which is used during low VOC loading conditions, to help save fuel cost.  The facility was looking for additional ways to decrease their exhaust ...

  • Combined heat & power is a clean, efficient and economic energy solution

    The 21st century has highlighted a need for clean, efficient and economic energy, which has put Combined Heat & Power (CHP) into the limelight. By providing on-site power generation, waste heat recovery and system integration, CHP offers a realistic, near-term solution for exceptional energy efficiency and emission reduction. CHP systems can generate electricity locally while they recover ...


    By Shenton Group

  • The future of plastics - Is there a solution to this huge waste management problem?

    Plastic - it has become the cornerstone of our modern life style, and one of the most challenging global waste management problems. So beneficial in countless ways, this nearly indestructible material is littering our environment on land and sea. Difficult to recycle, as post-consumer waste, and hard to break down, plastic in its many forms has become a serious environment problem. But solutions ...


    By GLOBE SERIES

  • Case-study - Utilising waste heat for water production and climate control

    Water purification is needed to produce high quality water for consumption, agriculture and industrial needs. Conventional water treatment processes, like distillation and reverse osmosis, consume vast amounts of energy. However, there is a large potential for significant reductions in energy consumption and CO2 emissions in this sector. It can be achieved by the exploitation of waste heat for ...


    By Climate-KIC

  • A study on the thermodynamic analysis of a cascaded latent heat storage system over the single storage tank system for diesel engine waste heat recovery

    This article presents the comparison of performance of a cascaded Latent Heat Storage (LHS) system over the Single Storage Tank (SST) system for heat recovery from a diesel engine. The energy and exergy saved and efficiencies during the charging process are evaluated and reported using actual system data. The discharge process is analysed with a case study and it is concluded that it is possible ...


    By Inderscience Publishers

  • Cover-all building ideal for waste water treatment solution

    Location: Bartlett, IL, USAApplication: Waste Water Treatment PlantBuilding Series: Legend®Building Size: (4) 62' w x 90' l (18.8m x 27.4m) In 2003, the Village of Bartlett in Illinois purchased four Cover-All® Legend buildings to cover their aerobic digesters at their waste water treatment plant.  Located just 40 miles from Chicago, the facility handles the waste water for 26,000 people ...


  • Maximising biogas in anaerobic digestion by using engine waste heat for thermal hydrolysis pre-treatment of sludge

    EXECUTIVE SUMMARY Dublin's Ringsend WWTP was designed to serve a population of approximately 1.2 million pe with a sludge production of 37,000 dry tonnes per year after upgrading to full secondary treatment. Several technical solutions were put forward as part of a Design, Build, Finance and Operate (DBFO) competition, with the chosen solution being a proposal by Black and Veatch for a ...


    By Cambi Group AS

  • Energy conservation in aluminium foundries by waste heat recovery from solidifying molten metal

    This paper presents a unique attempt to preheat the raw materials by recovering the waste heat from solidifying molten metal in shape castings of aluminium using sand moulds. Finite element analysis of the problem using ANSYS has also been done, results of which show satisfactory agreement with the experimental results. By using this preheating method, it is proved that around 16% of heat ...


    By Inderscience Publishers

  • Case study - Bespoke Solutions

    PROJECT 5000kg/h animal remains incineration project in accordance with EU WID Makkah, Kingdom of Saudi Arabia PROJECT DESCRIPTION The purpose of the plant was to dispose of the animal waste associated with Hajj religious festi-val in Makkah Saudi Arabia. During the festival approximately 10,000 tonnes of waste is pro-duced in 4-5 days. Historically ...


    By Todaysure Matthews

  • Case study - Bespoke Solutions

    PROJECT 450kg/hr animal remains incineration project in accordance with PG5/3, The Secretary of State’s Guidance Note for the incineration of animal remains under 10 tonnes per day Lincolnshire, UK PROJECT DESCRIPTION The purpose of the plant was to provide an incineration solution which complimented the clients livestock slaughter ...


    By Todaysure Matthews

  • Case study - Bespoke Solutions

    PROJECT 700kg/h animal remains incineration project in accordance with EU WID (Waste Incineration Directive 200/76/EU) Chrzanów , Poland PROJECT DESCRIPTION The purpose of the plant was a combined waste disposal / energy recovery. In-stalled at a large meat processing plant the plant was designed to process approxi-mately 700kg/h per of ...


    By Todaysure Matthews

  • Solution concepts for the production of biogas

    With its products that go to form part of biogas plants, it is not only a significant pioneering role that Hofstetter Umwelttechnik AG in Switzerland deserves. The company in Berne also adopts a leading position on the worldwide market for utilizing biogas. Hofstetter products – the socalled flares and compressor stations – are designed both for fermentation plants for biomass and for plants for ...


    By Hofstetter BV

  • A Path To Sustainable Infrastructure Solutions

    Today, for the most part, our communities’ infrastructure systems are developed and managed separately, by separate utilities and agencies. Sustainable infrastructure, on the other hand, blurs boundaries between our energy, transportation, water and waste systems to implement complementary strategies that benefit more than one system. Among our most important, and difficult, challenges will ...


    By BioCycle Magazine

  • Extending the life of wash solutions

    Simple things we learn early in life might well apply to a basic need of the parts washing market: To look good - wash well before you "dress." Washing metal parts is a necessity prior to painting or plating: If the wash is not properly prepared and foreign substances are not removed from the metal in the wash phase, the finish - the "dress" - may not hold properly, and it may not wear well. ...


    By Oil Skimmers, Inc.

  • How To Reduce Your Heating Bills This Winter

    Imagine leaving a window open all winter long -- the heat loss, cold drafts and wasted energy! If your home has a folding attic stair, a whole house fan or AC Return, a fireplace or a clothes dryer, that may be just what is occurring in your home every day. These often overlooked sources of heat loss and air leakage can cause heat to pour out and the cold outside air to rush in -- costing you ...


  • Heat recovery system at a flooring manufacturer - Case study

    Flooring Manufacturer Reduces Operating Costs with a Customized Heat Recovery System Rising energy costs effect your bottom line. You don’t have to be a CFO to understand that energy costs are high and show little sign of relief these days. To combat the rising cost of natural gas, many companies that operate air pollution control systems are beginning to look at methods that economically ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you