waste heat technology Articles

  • Case study - Monitoring the oxygen content in bio-methane-to-grid supply

    Since 1984, Orbital has provided advanced technology solutions for the natural gas industry. Orbital’s customers, including the National Grid and the UK's gas distribution networks, rely on its crucial engineering support and specialised knowledge. Its value-added services and innovative products reduce the time it takes to identify, design and begin cost-effective delivery of new ...


    By Systech Instruments Ltd

  • Top 5 incineration myth busters

    There are a lot of myths and misconceptions out there when it comes to incinerators and with many people feeling uncertain of what they actually need when in a position to purchase a incinerator, it is sometimes difficult to tell fact from fiction.  Every day we have multiple phone calls from existing and potential customers asking the same ...

  • What Is Zero Liquid Discharge and How Does It Work?

    Not every industrial facility that produces wastewater will require zero liquid discharge (ZLD). It is usually looked to as a last resort because it can be a complex process that requires a high initial investment. If a facility is located on a site that has severe water scarcity issues and/or astronomical discharge fees, it might be ...


    By SAMCO Technologies, Inc.

  • Low energy mixing to optimize anaerobic digestion at the Kitchener WWTP

    The existing Kitchener Wastewater Treatment Plant (WWTP) is a conventional secondary treatment facility, with a rated capacity of 122,745 mVd. The plant is comprised of two separate secondary treatment plants (Plant 1 and Plant 2) served by a common headworks facilities and primary clarifier facilities. Plant 1 was constructed in the early 1960s and Plant 2 was constructed in the mid-1970s. Both ...

  • Utilizing Waste Heat For Power

    Continuous duty gen-sets provide base-load power generation in diverse applications around the globe. However, high fuel costs and engine maintenance are pain points felt by operators. A low-maintenance path to significant fuel savings and lower emissions is what the U.S. Department of Defense (DOD) had in mind when they approached ElectraTherm to integrate the company’s Green Machine waste ...


    By ElectraTherm

  • New ways for Metal Recycling

    REWAVE XRF 3-way-sorting in innovative  “Free-Fall”-design Recycling of metal and aluminium knows no limits because it can be remelted as scrap indefinitely. Metals, however have to be separated from non-metallic impurities, and different metals have to be sorted in pure fractions to be used as secondary raw materials substituting primary resources. Especially when it ...

  • Basin Electric - wind and waste heat

    Location: Waste Heat Recovery projects in Culbertson, MT and Garvin, MN – Wind Projects Located in South Dakota and North Dakota Project Start Dates: 2009 – 2011 Element Markets is helping Chevrolet meet its CO2 reduction goal, and simultaneously helping a large Midwest power cooperative earn revenues needed to support its clean energy projects. This ...


    By Element Markets LLC

  • Emerging Waste Conversion Technologies

    Today, people and companies are more aware and concerned about the environment than ever before. Everyone is looking for ways to reduce waste or convert organic waste into something more useful. The Federal Government has introduced a renewable energy policy and is continuing to fund for new waste conversion technology. It is now important for local governments to portray their cities and towns ...

  • Processing technology for radioactive wastes

    For 20 years now, AVA has been delivering innovative mixers, dryers, and systems for environmental and processing technologies. The treatment of highly contaminated materials has always been one of our core competencies. For more than 10 years, AVA Technology has been applied for the processing of radioactive wastes. The application of AVA mixers and reactors may be divided into two main ...


    By AVA - Huep GmbH u. Co. KG

  • WEISS provides for the heat - and disposes of the waste case study

    The very first time PLIMOB learnt about Weiss was in 1995 at which time contacts at IKEA told about combustion plants from WEISS. IKEA is the most important customer for PLIMOB so the management listened to the recommendations. PLIMOB is producing wood furniture; large quantities of wood chips and sawdust are a spin-off effect from their production. Traditionally wood-working industries – ...


    By WEISS A/S

  • Marketing Analysis of Low Temperature Waste Heat Boiler

    Environmental pollution brought by the burning of fossil fuels and improper energy use structure have became big problems of boiler manufacturer like ZG. To need the market demand for the development of new energy and renewab ...


  • Thermodynamic and exergy efficiencies of magnetocaloric energy conversion utilising industrial waste heat

    An investigation under which conditions industrial waste heat utilised with magnetic energy conversion machines can be a possible alternative to conventional energy conversion technologies is presented. The application of a numerical model leads to the thermodynamic efficiency, the exergy efficiency, and approximate values of the total mass and the total volume of a magnetic energy conversion ...


    By Inderscience Publishers

  • How to recuperate industrial waste heat beyond time and space

    Any fossil fuel energy, after industrial utilisation such as combustion and electric generation, is finally emitted in the form of waste heat to the atmosphere. A database on waste heat revealed that a large amount of energy can be saved by reusing the high-temperature industrial waste heat efficiently. Thus, this paper introduces cutting-edge technologies for heat recovery by three promising ...


    By Inderscience Publishers

  • Seawater desalination utilising waste heat by low-temperature evaporation

    Utilisation of waste heat is one of the ecofriendly ways to produce low-cost desalted water. Keeping this in mind, Low-Temperature Evaporation (LTE) desalination technology utilising low-quality waste heat in the form of hot water (as low as 50?C) or low-pressure steam (0.13 bar) has been developed to produce high-purity water (conductivity ...


    By Inderscience Publishers

  • Case-study - Utilising waste heat for water production and climate control

    Water purification is needed to produce high quality water for consumption, agriculture and industrial needs. Conventional water treatment processes, like distillation and reverse osmosis, consume vast amounts of energy. However, there is a large potential for significant reductions in energy consumption and CO2 emissions in this sector. It can be achieved by the exploitation of waste heat for ...


    By Climate-KIC

  • CDQ waste heat boiler for iron and steel industry manufacturer

    Energy use is additionally a major supply of emissions from the iron and steel industry, making energy efficiency improvements a lovely chance to reduce both emissions of pollutants and greenhouse gases. The global steel industry has recently taken the lead on developing future low-carbon iron and steelmaking technologies. Waste heat boiler ...


  • Heat recovery from wastewater

    Heat recovery from gray water is particularly important in water-intensive industries such as pulp and paper plants, dairies and breweries. Rather than flushing used water down the drain, consider whether a heat exchanging system can help you put that energy to work in your process again. Most plant operators arc aware of the need to save money and reduce the environmental impact of their plant ...


    By DDI Heat Exchangers Inc.

  • Conventional and Alternative Technologies for the Treatment of Infectious Waste

    Abstract The limited scientific information about infectious waste, and the heightened public awareness of this special component of the waste stream, have contributed to the implementation or strengthening of the regulations in this area. This paper proposes a general working definition of infectious waste, and describes the systems used to limit its potential occupational and public health ...


    By Springer

  • Waste plastic recycling plant with high technology

    Company Profile: Waste plastic pyrolysis plant, with the superiority of low capital investment and high fuel financial price, it has become the first preferred waste disposal method in many countries.This profitable project was established every week with low labor costs and high profits. Huayin renewable energy equipment company, established in 1993,have been a leader of oil pyrolysis ...


  • Plasma Methods for Technology Processing of Toxical Industrial Wastes

    Experimental study of thermal neutralization of some toxic chlorine and bromine industrial wastes, as well as of pesticides with a expired term of validity was carried out in the three-jet plasma reactor . Different physical-chemical methods were used for analysis of products of waste processing. It was shown that plasma technology provides effective processing of toxic ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you