waste incineration Articles

  • Incineration

    Introduction: High temperatures, 870 to 1,200 °C (1,400 to 2,200 °F), are used to volatilize and combust (in the presence of oxygen) halogenated and other refractory organics in hazardous wastes. Often auxiliary fuels are employed to initiate and sustain combustion. The destruction and removal efficiency (DRE) for properly operated incinerators exceeds the 99.99% requirement for hazardous waste ...

  • Top 5 incineration myth busters

    There are a lot of myths and misconceptions out there when it comes to incinerators and with many people feeling uncertain of what they actually need when in a position to purchase a incinerator, it is sometimes difficult to tell fact from fiction.  Every day we have multiple phone calls from existing and potential customers asking the same ...

  • Municipal Incinerator Waste

    The monitoring of metal concentrations in the waste water from municipal incinerators to ensure compliance with the EU Waste Incineration ...

  • Waste Incinerator Project

      Medical Waste Incinerator YD Model is our classic product for market. All series included burning capacity 10kgs per hour, 30kgs per hour,50kgs per hour,100kgs per hour,150kgs per hour,300kgs per hour,500kgs per hour. Up to now, all models sale to all over the world and have good feedback from end-customer. The YD Model medical incinerator have multi-combustion chamber and basic dry ...


  • Atmospheric impact of a municipal wastes incinerator

    This paper presents a case study of an air pollution dispersion model for the atmospheric impact assessment of a new municipal wastes incinerator (MWI). The capacity of the present MWI will increase more than ten times, and a new high-efficiency flue gas treatment system is projected. The environmental impact study has been focused on the long-term aspect of the air pollution (chronic pollution) ...


    By Inderscience Publishers

  • Minicipal Waste Incinerator Case History

    Low temperature plant operation had resulted in severe baghouse corrosion and constant dust blockages throughout the system. It was decided to raise the operational temperature of the incinerator and change the acid gas scrubbing agent from lime to sodium bicarbonate. However, the existing felt filter media could not cope with the change in acid gas scrubbing agent and “blinded” very rapidly ...


    By W. L. Gore & Associates

  • Treatment and Disposal of Air Pollution Control Residue

    What is APCr? Thermal waste management using Energy Recovery Facilities (ERFs) is now a well-managed and mature technology that is subject to environmental monitoring by a range of competent international bodies. These ERFs have been established as a means of diverting waste away from landfill disposal and for valorising the material and energy content of the waste. Counter to historic ...

  • Waste Incineration Upgrades at the Eastman Chemical Company

    INTRODUCTION Eastman Chemical Company, headquartered n Kingsport, TN, is an international supplier of organc chemicals, fibers anci plastics with annual sales of approximately $46 biNion and approximately 5300 customers worldwide. Tennessee Eastman Division, also located in Kingsport, is the company’s largest manufacturing fadllity The nine hundred acre site contains manutacturing facilities as ...


  • On-Site Incineration Tames Arsenal Waste Mixture

    Toxic wastes from various chemical processing activities at Rocky Mountain Arsenal (RMA) had accumulated in on-site evaporation basins over many years. The highly corrosive wastes, which posed environmental and potential health hazards, were by-products of the U.S. government’s chemical weapons program during World War 11 and its later weapons disposal program, as weIl as sorne pesticide ...


  • Incineration of hazardous wastes from the petroleum industry in Nigeria

    Persistent hazardous wastes are produced in the recovery, processing and upgrading of crude petroleum in Nigeria. However, recent developments in environmental pollution control are drawing increasing attention to the problems of hazardous wastes. The ever-increasing need to control these wastes from the petroleum industry often compels the chemical engineer to specify methods of treatment and ...


    By Inderscience Publishers

  • Optimizing Baghouse Performance in Waste-to- Energy Incinerator

    An end user with many years experience, operating3 different Municipal Waste Incineration plants, decided to build a new “state of the art” plant. After fully investigating the performance of different types of filter media, he decided upon GORE-TEX® membrane on GORE-TEX® felt, as he was convinced that is was the “best available ...


    By W. L. Gore & Associates

  • Hazardous Waste Incineration Slag Optimisation by Additives

     Abstract Rotary kiln incineration combined with the disposal of residual slag on landfills defined by German landfill regulations is the most acceptable treatment for hazardous waste with respect to the environment. The objective of research is to optimize the elution behavior of HWI-slag. Quality-improved slags may be disposed off on cheaper landfill sites still applying to the landfill ...


  • Waste co-incineration in the European Community, is the sky the limit?

    The co-combustion of waste in industrial furnaces -co-incineration- attracts considerable interest in the European Community, because of the combination of perceived business incentives, regulatory developments, and the slate of available technological options. It was found, however, that EU-regulation developed to ensure safe and environmentally acceptable processing of waste represents a clear ...

  • How to achieve triple bottom line sustainability benefits on airport runway projects

    CH2M delivers best-in-class sustainable approaches for airport clients worldwide by constantly seeking opportunities to apply sustainable development and design concepts. From planning through plowing, CH2M is leading the development of the most sustainable runway projects in the U.S. Through our life-cycle approach, airport clients have experienced significant benefits such as ...


    By CH2M Hill Companies, Ltd.

  • Particulate Control Strategies for Incineration

    Abstract This paper discusses various particulate emission control strategies that can be employed for Municipal Solid Waste (MSW), Municipal Sewage Sludge, and Industrial Waste Incineration facilities. An example will be given of a particulate control installation that successfully cleans off-gases from an incinerator at a large photographic products plant. Data supporting a theoretical ...


  • New ways for Metal Recycling

    REWAVE XRF 3-way-sorting in innovative  “Free-Fall”-design Recycling of metal and aluminium knows no limits because it can be remelted as scrap indefinitely. Metals, however have to be separated from non-metallic impurities, and different metals have to be sorted in pure fractions to be used as secondary raw materials substituting primary resources. Especially when it ...

  • Case study - Allburn Incinerators

    PROJECT 19 off containerised Allburn 3 Incinerators World Health Organisation—Ethiopia PROJECT DESCRIPTION Top loaded, diesel fired, low capacity incinera-tors, factory -installed within 20’ ISO shipping containers, for the disposal of bagged general/clinical waste from hospital and clinics, animal and industrial waste. To be ...


    By Todaysure Limited

  • Increase in capacity of an incinerator

    In addition to its own and external products, system providers involved in the project business also provide process knowledge and complete projects refined to the last detail. The standard is high. Their own knowledge combined with the supplier’s knowledge leads to a complete solution. From the delivery of the components to their installation, trial operation and commissioning, all the ...


    By sera GmbH

  • Incinerator Plant, Lidköping - Case Study

    SWEDEN: Baling of MSW In Lidköping the incineration plant is connected to the central heating systems of the city. However, incineration plants has a high demand for fuel in the winter season and limited demand in the summertime. Inflow of material, however, comes evenly all year around and this gives a need to store waste during the summer. The solution to this is the ...


    By Flexus Balasystem AB

  • The municipal solid waste incineration sector in Europe: a study of harmonisation and its impact

    This article discusses how Sustainable Development and Quality Management meet a common target. Companies that excel in Best Available Technology (BAT) respond to expanding sets of expectation of the client and of the legislator. The paper analyses the link between governance, lobbying, and the emergence of economic and environmental feasibility of current quality management factors. In ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you