waste incineration boiler Articles

  • A STIEFEL project Waste Incineration Plant (KVA) Trimmis case study

    The waste incineration plant (KVA) Trimmis is situated in the eastern part of Switzerland and is connected to the railway network. As it is the only incineration plant in this province, it serves a large area with approximately 131’000 inhabitants. The local authorities waste disposal association named GEVAG is a public body serving 43 convention communities and 97 associated municipalities ...


    By Jakob Stiefel GmbH

  • Boilers, Solid Waste, and the CAA....Oh My!

    Boilers, Solid Waste, and the CAA....Oh My!   ...


    By All4 Inc.

  • New boiler MACT and affiliated rules proposed

    EPA proposed three related rules (with final rules expected by December 16, 2010), intended to reduce the emission of hazardous air pollutants (HAPs) from industrial, commercial, and institutional boilers and process heaters as well as commercial and industrial solid waste incinerators. Simultaneously, it also proposed a definition of solid waste that could potentially affect some units currently ...


    By Trinity Consultants

  • Energy from Waste (EfW)

    To recover energy from waste is a necessary and useful part of the whole waste management process. Inciner8 have developed the first truly mobile waste to energy solution in their EfW range of equipment. ...


    By Inciner8 Limited

  • New solid waste definition proposed

    When the Boiler MACT rule was vacated in 2007, one key element in the court challenge was that many non-fossil fuel materials burned in industrial boilers should be classified as solid wastes and regulated accordingly. Along with the recently proposed Boiler MACT and rules for commercial/industrial/solid waste incinerators (CISWI), EPA proposed criteria to determine whether non-hazardous ...


    By Trinity Consultants

  • Dewatering of Boiler Ash - Case Study

    Ten Gate develops and produces materials that function to increase performance, reduce costs, and deliver measurable results by working with our customers to provide advanced solutions. THE PROJECT The Wheelabrator Technology Group provides design/build and operation of trash-to-energy facilities. The Wheelabrator facility located in Lisbon, CT utilizes a storage tank for ...

  • Moredun Group incinerator vital part of research centre - Case Study

    Moredun Group benefits the welfare of farm animals through research. An incinerator was needed to destroy the clinical waste produced on site, to prevent a bio-security hazard. Client overview Moredun Group is a worldwide renowned animal health and welfare centre, that specialises in the research into infectious diseases of farmed livestock. In 1995, the ...

  • INTO THE VOID...U.S. EPA`s recent boiler MACT and CISWI information collection request

    Background - The United States Court of Appeals for the District of Columbia Circuit (court) has been quite busy in the last few years hearing environmental cases, particularly air quality related topics. On June 8, 2007, the court vacated and remanded two (2) U.S. EPA rules promulgated under the Clean Air Act (CAA)-The Commercial and Industrial Solid Waste Incineration (CISWI) definitions rule ...


    By All4 Inc.

  • The twin cities sludge-to-energy plant reduces greenhouse gas emissions

    ABSTRACTThe majority of Utilities and Agencies in the United States (U.S.) that incinerate sludge treat this practice as a disposal method and do not maximize the recovery of energy available in the sludge and hence, do not contribute to the reduction in greenhouse gas (GHG) emissions.  The Metropolitan Council Environmental Services (MCES) have used incineration at the Metro Wastewater ...

  • Helping veolia transform waste into bio-fuel case study

    LIPODAN, a VEOLIA company, is a plant for recycling grease, food grease and used oil which is collected from restaurants, from gas stations, car garages, bus companies and similar locations. The plant treats 12,000 Tons of organic oils and 6,000 Tons of mineral oil per year. For recycling, the plant is using the LIPOVAL process. The oils are first converted to LIPOFIT, an ...

  • Medical Waste Management Facility Isle of Man – Addfield C1000 - Case Study

    Offsetting environmental and biosecurity issues whilst providing cost benefits by managing waste on the island. In 2006, Addfield-Techtrol installed a 1000kg per hour medical waste treatment plant on the Isle of Man, UK. The plant was integrated into the existing municipal waste site and conceived to manage a wide variety of hazardous waste streams that included clinical waste, ...

  • Case study - Perstorp Speciality Chemicals AB,Perstorp, Sweden

    Customer: Perstorp Speciality Chemicals AB,Perstorp, Sweden Project: Chemical Waste Incinerator operating WESP Perstorp AB started up their Chemical Waste Incinerator year 2007. The emission standard to meet stated < 5 mg/Nm3. With a standard as low as 5 mg the natural choice ended up in a WESP. Result The plant has operated ...


    By Envibat AB

  • Practical Implementation of EN-14181in Particulate Monitoring - Case Study

    Introduction This case study summarises the results of implementing particulate monitoring according to EN-14181 in a municipal incinerator operated by SUA in Teesside, UK, with a ProScatter M type particulate instrument (Model PCME QAL 181). It also provides a comparison of results for monitoring the same stack with an ElectroDynamic particulate instrument (Model PCME QAL 991). This case ...


    By ENVEA

  • Nordforbrænding: Hørsholm, Denmark Waste-to-Energy Plant - Case study

    The plant Nordforbrænding is owned by five municipalities (Hørsholm, Allerød, Fredensborg, Elsinore, and Rudersdal) in the northern part of Zealand in Denmark covering a population of approximately 200,000 inhabitants. Nordforbrænding contracted a new waste-to-energy line to be completed in 2016. The new  ...


    By Dürr Megtec LLC

  • EPA proposes updates to CISWI rules

    On June 4, 2010, the U.S. EPA proposed updates to the Standards of Performance for New Stationary Sources (NSPS) for Commercial and Industrial Solid Waste Incineration (CISWI) Units (NSPS Subpart CCCC) and Emission Guidelines (EG) for Existing CISWI Units (EG Subpart DDDD), collectively referred to as the "CISWI Rules." In order to describe the proposed updates to the CISWI Rules, it is necessary ...


    By Trinity Consultants

  • Case study - Bespoke Solutions

    PROJECT 5000kg/h animal remains incineration project in accordance with EU WID Makkah, Kingdom of Saudi Arabia PROJECT DESCRIPTION The purpose of the plant was to dispose of the animal waste associated with Hajj religious festi-val in Makkah Saudi Arabia. During the festival approximately 10,000 tonnes of waste is pro-duced in 4-5 days. Historically ...

  • Case study - Bespoke Solutions

    PROJECT 700kg/h animal remains incineration project in accordance with EU WID (Waste Incineration Directive 200/76/EU) Chrzanów , Poland PROJECT DESCRIPTION The purpose of the plant was a combined waste disposal / energy recovery. In-stalled at a large meat processing plant the plant was designed to process approxi-mately 700kg/h per of ...

  • The Future of Secondary Materials as Fuel

    Many questions related to the regulatory status of facilities that use secondary materials as alternative fuels are anticipated to be answered in 2010.  In simple terms, if a combustion source uses a secondary material that is characterized as solid waste as an alternative fuel, then that source could be subject to a Clean Air Act (CAA) Section 129 standard.  If the same source used a ...


    By All4 Inc.

  • European Oil and Gas from Exploration to End User

    Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...

  • Cement Manufacturing - Balancing Growth with Air Quality Requirements

    In most areas of the U.S., it appears that the recession is a bad memory and the signs of recovery are all around us. As described by the Portland Cement Association (PCA) on its website[1], “following the strongest cement consumption gains in seven (7) years in 2012, cement consumption growth will continue in 2013 with a 6.2% increase.” PCA continues to explain that “the ...


    By All4 Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you