waste incineration monitoring Articles

  • Municipal Incinerator Waste

    The monitoring of metal concentrations in the waste water from municipal incinerators to ensure compliance with the EU Waste Incineration ...

  • Why Incinerate?

    Products that we all use every day have a finite lifespan. Even with initiatives to re-use and recycle lots of waste still ends up in landfill sites where the chemicals in these products will decompose and can do extensive environmental harm as they break down. Plastics are not all biodegradable and there are still millions of plastic bags being manufactured, used and ending up in landfill so the ...


    By Inciner8 Limited

  • Simulation of the plume emitted by a municipal waste incinerator in Madeira Island

    TAPM (The Air Pollution Model) was applied to Madeira Island to simulate the behaviour of the plume of a municipal waste incinerator that was constructed in the southern slope of the island at an altitude of 1380 m. TAPM simulates very well the atmospheric flow that occurs around the island and inside the inner valleys under strong synoptic forcing. Validation tools reveal the good agreement ...


    By Inderscience Publishers

  • Could incinerating the plastic mountain be an answer?

    Energy from waste has its appeal China’s decision to ban its recycling operations for foreign plastics has suddenly caused a massive problem for the UK government.  Up until recently, Britain has been shipping up to 500,000 tonnes of plastic for recycling in China every year, which is about 25% of our total plastics waste.  Now that trade has ceased and already the problem ...

  • Human biomonitoring to define occupational exposure and health risks in waste incinerator plants

    A contribution to the research on the relationship between exposure to ambient pollutants and diseases comes from human biomonitoring data collection and interpretation. The 21 biomonitoring studies reviewed are mainly aimed at providing either information on exposure amongst worker subgroups, serving as a reference, or information on the relationship between exposure and toxicity. Attention was ...


    By Inderscience Publishers

  • Monitoring of garbage chutes - Case Study

    Application Waste recycling in incineration plants starts with the delivery and incineration of waste. The waste reaches the combustion chamber via a falling chute, which is followed by a hydraulic feed device. To guarantee a constant incineration process, the falling chute has to be fi lled constantly. The „high“ and „low“ limit values should be detected and ...


    By ENVEA

  • Increase in capacity of an incinerator

    In addition to its own and external products, system providers involved in the project business also provide process knowledge and complete projects refined to the last detail. The standard is high. Their own knowledge combined with the supplier’s knowledge leads to a complete solution. From the delivery of the components to their installation, trial operation and commissioning, all the ...


    By sera GmbH

  • Dust monitoring with AirSafe - Case Study

    Application A waste incineration plant burns waste. A fi nal product of this incineration process is fi lter dust, which is stored in silos before being evacuated. For the ambient air monitoring of the silos, convey lines and connected rooms, the plant manager looked for a maintenance-free way to detect dust leaks and malfunctions. Optical techniques were not ...


    By ENVEA

  • Rotary Kiln Incineration Plant - Case Study

    The R1200 plant was installed in the early 00’s in Macau. The fully integrated system boasts a burn rate if 1200kg per hour and accepts a variety of different waste streams that include, clinical waste, pharmaceutical waste, liquid waste that includes solvents, waste oil, shredded tyres and well as some livestock as large as horses. The rotary kilns incineration principle is defined by one ...

  • Medical waste incinerators are the next logical step for many countries - Case Study

    Worldwide medical waste incinerators are making a huge difference to waste control, many clinics and hospitals that just a few years ago either buried or burned their medical waste are now utilising the benefits of incinerators to help them take the next step toward better health. Even generating heat and hot water and in some larger cases electricity generation are available. ...

  • Pollutant reduction control and Continuous Emissions Monitoring at Waste-to-Energy Plants

    Waste is generally undesired, and best not generated at all. The second best alternative to manage waste is to recycle it. However, there is also waste that for various reasons is not recycled. Landfills have then been the old-school solution, but it is for environmental reasons becoming a less viable option. What then remains is waste incineration, in most cases while recovering the energy ...


    By Opsis AB

  • QinetiQ – Modular EU Compliant incineration package - Case Study

    TodaySure™ were commissioned to construct an Integrated Battlefield Support System Incinerator as part of a Ministry of Defence funded research programme, to demonstrate that waste management can be achieved in a responsible way, compliant with challenging environmental standards. Designed to meet the stringent requirements of the EU Waste Incineration Directive, the combustion chambers, ...

  • Selection of Particulate Monitors

    The installation and operation of continuous particulate emission monitors in industrial processes has become well developed and common practice in industrial stacks and ducts over the past 30 years reflecting regulatory monitoring requirements. It supports requirements originating from LAPPC (Local Air Pollution Prevention and Control), IPPC (Integrated Pollution Prevention and Control), WID ...


    By ENVEA

  • Management of Hazardous Wastes

    ' Management of hazardous waste is a growing concern in many countries. The long-term impacts and costs of improper disposal can be very high and the emphasis must be on prevention. A comprehensive management system should include (i) policies, institutions and effective regulations and (ii) adequate and acceptable disposal facilities (either public or private). This note outlines the key ...


    By The World Bank

  • AVA Technology for Hazardous Waste Treatment - Case Study

    AVA has developed systems for pre-treating hazardous waste prior to incineration, which leads to higher throughput performance in combination with lower construction and maintenance costs and additional low pollution emissions, in comparison to conventional techniques. The system is based on the principal that constant gross calorific values and regular piece sizes together with consistency of ...


    By AVA GmbH u. Co. KG

  • The G250 High Capacity Incinerator

    Is a fully self contained, solution to waste management. ...

  • Practical Implementation of EN-14181in Particulate Monitoring - Case Study

    Introduction This case study summarises the results of implementing particulate monitoring according to EN-14181 in a municipal incinerator operated by SUA in Teesside, UK, with a ProScatter M type particulate instrument (Model PCME QAL 181). It also provides a comparison of results for monitoring the same stack with an ElectroDynamic particulate instrument (Model PCME QAL 991). This case ...


    By ENVEA

  • Continuous Emissions Monitoring Equipment – Guidance & Selection

    There has never been such a wide range of analysers and systems available for continuous emissions monitoring as there is today. In the UK there are over 12 manufacturers and distributors offering CEMS (continuous emissions monitoring systems) using a variety of technologies including UV and IR absorption, FTIR, DOAS, chemiluminescence and photoacoustic spectroscopy (PAS). The majority of CEMS ...

  • Moredun Group incinerator vital part of research centre - Case Study

    Moredun Group benefits the welfare of farm animals through research. An incinerator was needed to destroy the clinical waste produced on site, to prevent a bio-security hazard. Client overview Moredun Group is a worldwide renowned animal health and welfare centre, that specialises in the research into infectious diseases of farmed livestock. In 1995, the ...

  • X-Ray Fluorescence-Based Multi-Metal Continuous Emission Monitor

    ABSTRACT: Army demilitarization incinerators will need to comply with the Hazardous Waste Combustor National Emission Standard for Hazardous Air Pollutants that will regulate metals and metal compounds listed under the Clean Air Act Amendments. A large problem for these incinerator operations is limited knowledge of the type and quantity of emitted metals, so that compliance may be determined ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you