waste incineration technology Articles

  • Incineration

    Introduction: High temperatures, 870 to 1,200 °C (1,400 to 2,200 °F), are used to volatilize and combust (in the presence of oxygen) halogenated and other refractory organics in hazardous wastes. Often auxiliary fuels are employed to initiate and sustain combustion. The destruction and removal efficiency (DRE) for properly operated incinerators exceeds the 99.99% requirement for hazardous waste ...

  • Why Incinerate?

    Products that we all use every day have a finite lifespan. Even with initiatives to re-use and recycle lots of waste still ends up in landfill sites where the chemicals in these products will decompose and can do extensive environmental harm as they break down. Plastics are not all biodegradable and there are still millions of plastic bags being manufactured, used and ending up in landfill so the ...


    By Inciner8 Limited

  • Optimizing Baghouse Performance in Waste-to- Energy Incinerator

    An end user with many years experience, operating3 different Municipal Waste Incineration plants, decided to build a new “state of the art” plant. After fully investigating the performance of different types of filter media, he decided upon GORE-TEX® membrane on GORE-TEX® felt, as he was convinced that is was the “best available ...


    By W. L. Gore & Associates

  • AVA Technology for Hazardous Waste Treatment - Case Study

    AVA has developed systems for pre-treating hazardous waste prior to incineration, which leads to higher throughput performance in combination with lower construction and maintenance costs and additional low pollution emissions, in comparison to conventional techniques. The system is based on the principal that constant gross calorific values and regular piece sizes together with consistency of ...


    By AVA GmbH u. Co. KG

  • Medical Incineration Experts

    Used Hypodermic needles in a Bio Hazard Bag. Used Hypodermic Needles are a very dangerous product and are incinerated along with other Bio Hazard medical waste products Medical ...


    By Inciner8 Limited

  • Conventional and Alternative Technologies for the Treatment of Infectious Waste

    Abstract The limited scientific information about infectious waste, and the heightened public awareness of this special component of the waste stream, have contributed to the implementation or strengthening of the regulations in this area. This paper proposes a general working definition of infectious waste, and describes the systems used to limit its potential occupational and public health ...


    By Springer

  • Incineration of hazardous wastes from the petroleum industry in Nigeria

    Persistent hazardous wastes are produced in the recovery, processing and upgrading of crude petroleum in Nigeria. However, recent developments in environmental pollution control are drawing increasing attention to the problems of hazardous wastes. The ever-increasing need to control these wastes from the petroleum industry often compels the chemical engineer to specify methods of treatment and ...


    By Inderscience Publishers

  • Waste co-incineration in the European Community, is the sky the limit?

    The co-combustion of waste in industrial furnaces -co-incineration- attracts considerable interest in the European Community, because of the combination of perceived business incentives, regulatory developments, and the slate of available technological options. It was found, however, that EU-regulation developed to ensure safe and environmentally acceptable processing of waste represents a clear ...

  • Thermal Treatment Technologies

    Hot gas decontamination: Hot gas decontamination is a technology still in the pilot-scale of development that can be used for decontamination of explosives-contaminated masonry or metallic structures. The method involves sealing and insulating the structures, heating with hot gas stream to 260 °C (500 °F) for a prescribed period of time, volatilizing the explosive contaminants, and destroying ...

  • Could incinerating the plastic mountain be an answer?

    Energy from waste has its appeal China’s decision to ban its recycling operations for foreign plastics has suddenly caused a massive problem for the UK government.  Up until recently, Britain has been shipping up to 500,000 tonnes of plastic for recycling in China every year, which is about 25% of our total plastics waste.  Now that trade has ceased and already the problem ...

  • Eco-Cycle Efficient Incinerators

    The EcoCycle badge is an accumulation of energy efficient technologies developed by Addfield, which allows us to create some of the most fuel efficient and eco friendly incinerator and cremator machines on the market today. The technology incorporates: 180mm-221mm of refractory wall thickness that retains the incinerator heat inside the machine and ...

  • Consensus building and knowledge integration methods applied to technology implementation in the Swiss waste incineration industry

    This paper describes the use of consensus-building and knowledge integration methods to reflect stakeholders' preferences. These methods were applied in a complex decision making process concerned with the implementation of innovative technologies in Swiss waste incineration plants. We described stakeholders' preferences by integrating their knowledge into a multi-criteria evaluation of ...


    By Inderscience Publishers

  • Turning waste into wattage

    How we are helping to meet the growing demand for waste energy recovery It’s a sign of the times that more and more companies and organisations are now looking at ways to capitalise on the waste material their production process produces rather than having to pay a third part to take it away for them.  One reason of course is the high cost of scrappage.  Another is the ...

  • Dangerous Substances in Waste

    Abstract The report focuses specifically on environmental risks associated with the main final disposal technologies, landfilling and incineration. The main objective of the report is the analysis of these technologies and the description of the related emissions, the ranking of dangerous substances and a selection of relevant waste streams, for further studies, which are responsible for the ...

  • Benefits of OZONATOR Technology for the Treatment and Sterilization of Medical and Bio-Hazard Waste

    OZONATOR Industries Limited white paper outlines the environmental benefits of ozone based technology for the treatment of regulated medical waste and bio-hazard waste.  OZONATOR Industries Ltd. is the world-wide manufacturer of the OZONATOR NG-3000 medical and bio-hazard waste treatment technology – with zero emissions. The OZONATOR is a revolutionary advancement in waste treatment ...


    By OZONATOR Industries Limited

  • Why choose a Rotary Incinerator

    Although, the majority of machines that we manufacture are fixed chamber incinerators. There are occasions when considering a Rotary incinerator could be the right decision for you and your waste requirements. As every need is unique we would always recommend that if you have any questions that you let us help guide you to the best solution for you. ...

  • Energy from Waste (EfW)

    To recover energy from waste is a necessary and useful part of the whole waste management process. Inciner8 have developed the first truly mobile waste to energy solution in their EfW range of equipment. ...


    By Inciner8 Limited

  • The municipal solid waste incineration sector in Europe: a study of harmonisation and its impact

    This article discusses how Sustainable Development and Quality Management meet a common target. Companies that excel in Best Available Technology (BAT) respond to expanding sets of expectation of the client and of the legislator. The paper analyses the link between governance, lobbying, and the emergence of economic and environmental feasibility of current quality management factors. In ...


    By Inderscience Publishers

  • Increase in capacity of an incinerator

    In addition to its own and external products, system providers involved in the project business also provide process knowledge and complete projects refined to the last detail. The standard is high. Their own knowledge combined with the supplier’s knowledge leads to a complete solution. From the delivery of the components to their installation, trial operation and commissioning, all the ...


    By sera GmbH

  • A STIEFEL project Waste Incineration Plant (KVA) Trimmis case study

    The waste incineration plant (KVA) Trimmis is situated in the eastern part of Switzerland and is connected to the railway network. As it is the only incineration plant in this province, it serves a large area with approximately 131’000 inhabitants. The local authorities waste disposal association named GEVAG is a public body serving 43 convention communities and 97 associated municipalities ...


    By Jakob Stiefel GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you