waste incinerator stacks Articles

  • Mayo finds technical fix to reduce incinerator emissions

    While the medical waste incinerator at Mayo Clinic in Rochester, Minn., consistently met state and federal emission requirements, facility leaders wanted to find a way to go beyond these standards. Mayo Clinic’s medical waste incinerator serves Mayo Clinic, Saint Marys Hospital and Rochester Methodist Hospital, which form the largest group medical practice in the world, and processes 2,000 ...


    By Bionomic Industries Inc.

  • Analysis of Stack Emissions Using VOST Air Sampling Tubes and Capillary GC

    United States EPA SW-846, Method 0030, Volatile Organic Sampling Train (VOST), describes the sampling of emissions for volatile compounds from hazardous waste incinerator stacks. Supelco's VOST air sampling tubes are designed to fulfill the method requirements and provide low background levels.               ...


    By MilliporeSigma

  • Incineration of Explosives-Contaminated Soil and Reactive RCRA Waste at the Former Weldon Spring Ordnance Works

    ABSTRACT This paper presents the results of a Combustion Risk Assessment (CRA) and Trial Burn Testing Program for a transportable hazardous waste incinerator at the former Weldon Spring Ordnance Works (WSOW), Missouri, USA. From 1942 to 1945, the Ordnance Works was the largest TNT manufacturing plant in the world, producing approximately 1 million pounds of TNT per day. The Transportable ...


    By Weston Solutions, Inc

  • Sludge Incinerator RTO Upgrade with MLM-160-6®: $50,000+ Yearly Power Savings

    IntroductionThe city of Fitchburg, Massachusetts operates a multiple hearth incinerator that burns municipal sludge to minimize waste volumes. Although not universally used by municipalities in the United States, incineration is a widely accepted and used method of sludge disposal. The major benefit of incineration is a greatly reduced need for landfill space. An 85 - 95% volume reduction of ...


    By Lantec Products, Inc.

  • Supercritical water oxidation presented as alternative to incineration – An update

    Environmentally benign waste disposal is becoming a more and more acute problem. A process now being commercialised, supercritical water oxidation is demonstrating extremely efficient organic waste destruction (99.99%) plus excellent environmental characteristics (none of the emissions associated with incineration). The process is especially suitable for the treatment of wastewater and sludges ...


    By SCFI Group Limited

  • Municipal solid waste: alternative source of energy to the cement kilns in the state of Madhya Pradesh, India

    Rapid urbanisation has resulted in large–scale municipal solid waste (MSW) generation in India. Scientific and environment friendly disposal of MSW is a challenge for the municipal local bodies. A survey has been conducted regarding municipal solid waste generation from 342 local bodies in the State of Madhya Pradesh. Total generation of the MSW in the State is estimated around 4,500 MT/day ...


    By Inderscience Publishers

  • Canarina DISPER software · cadmium · air pollution · commands 2

    Due to the features of the software that allows to simulate the process of air pollution dispersion immediately, the numeric simulation is carried out with a remarkable speed. You create the graphical interface for your pollutant stacks by drawing point sources in a graphical way. You create the simulation process by drawing point sources, such as stacks, on the DISPER window. Next, you set ...

  • Are incineration and landfills the answer to save us from the recycling crisis?

    For plastic recycling, this year hasn’t exactly been one of the best – what is to blame? Oil. Shockingly, it actually costs more to recycle old plastic than it does to make new in many ways. Petroleum prices have fallen so low, as low as 70% below the level in June 2014. This may be great for some – however with it has fallen the cost of Virgin Plastic which is made from ...


    By GPT Waste Management Ltd

  • The G250 High Capacity Incinerator

    Is a fully self contained, solution to waste management. ...

  • Shredding Puzzle in the Process of Waste Material Recycling

    There are two main types of waste fabric waste: (1) the factory in the leather fabric processing and production of leather fabric can not be 100% of the use, so in the production of some by-products or waste, such as tailoring and sewing clothes when the extra cloth, cloth and other waste , As well as in the synthesis of chemical fiber in the process of excess waste and so ...

  • Practical Implementation of EN-14181in Particulate Monitoring - Case Study

    Introduction This case study summarises the results of implementing particulate monitoring according to EN-14181 in a municipal incinerator operated by SUA in Teesside, UK, with a ProScatter M type particulate instrument (Model PCME QAL 181). It also provides a comparison of results for monitoring the same stack with an ElectroDynamic particulate instrument (Model PCME QAL 991). This case ...


    By ENVEA

  • Comparison between different dispersion models using wind-tunnel small-scale measurements

    In this paper, the results from a plume diffusion experiment on a small-scale model of a two-stack waste incinerator, carried out in a developed boundary-layer wind-tunnel, will be presented. A brief description of the tunnel, the measurement system, and the artificially developed neutral boundary layer is given. The experiments investigate ground-level concentration measurements and vertical and ...


    By Inderscience Publishers

  • Axion: is ‘storing’ waste plastics better than burning?

    As global temperatures head for potentially catastrophic levels, landfilling rather than burning waste plastics might be better for the environment, suggests Keith Freegard, Director of Axion Polymers. Landfill or incineration: what is the best disposal route for our waste plastic materials? Large numbers of energy-from-waste (EfW) plants exist right across Europe and many of ...


    By Axion Group

  • Measles and HIV Research Programmes - Case Study

    The Medical Research Council (MRC) has units based in Uganda and Gambia. These were the chosen countries to introduce a state of the art incinerators to help tackle the Measles and HIV outbreak that plagues millions of people. Client Overview The MRC’s focal point is medical science that will provide life changing improvement to the health systems in both the UK and in ...

  • High Capacity incineration plant supports plastic waste management in remote locations - Case Study

    The best solution for dealing with plastic waste The Ascension Islands, a remote volcanic island located just south of the equator. Having no permanent residents yet a rotating population of approximately 800 people. Managing waste securely has become a growing issue previously managed by being burned in an open heap with any residue that didn’t burn sent away to landfill. ...

  • New boiler MACT and affiliated rules proposed

    EPA proposed three related rules (with final rules expected by December 16, 2010), intended to reduce the emission of hazardous air pollutants (HAPs) from industrial, commercial, and institutional boilers and process heaters as well as commercial and industrial solid waste incinerators. Simultaneously, it also proposed a definition of solid waste that could potentially affect some units currently ...


    By Trinity Consultants

  • Analysis of PCBs in emission samples: non ortho, mono-ortho and homolog totals by level of chlorination

    IntroductionPolychlorinated biphenyls (PCBs) are one of the most widespread persistent organic pollutants, identified in every component of the global ecosystem. A production of approximately 2 * 10 9 Kg technical PCB occurred form 1930 to the late 1970 1 and the total amount released into the environment is estimated in 370. 000 2 tonnes. Twelve of the possible 209 PCBs are non- and mono-ortho ...


    By Monitoring Systems GmbH

  • Natural Gas Processing Case Study

    The Customer The Company is an exploration and production company that builds natural gas reserves through the acquisition and development of oil and gas assets across the U.S. They are one of the largest producers of natural gas in the Nation. The Process The Company uses multiple scrubbers to clean out the impurities of the natural gas that they ...

  • Thermal Treatment Technologies

    Hot gas decontamination: Hot gas decontamination is a technology still in the pilot-scale of development that can be used for decontamination of explosives-contaminated masonry or metallic structures. The method involves sealing and insulating the structures, heating with hot gas stream to 260 °C (500 °F) for a prescribed period of time, volatilizing the explosive contaminants, and destroying ...

  • Thermal Oxidizer

    THERMAL OXIDIZER   PRINCIPLE OF COMBUSTION The primary function of the Thermal Oxidizer is to destroy the contaminants in the exhaust coming out of a process.  The operation of the Thermal Oxidizer is based on the principle of combustion.  The process of combustion is the most commonly used method to control emissions of organic compounds. ...


    By Epcon Industrial Systems, LP

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you