waste oil analysis Articles

  • Flaxseed Oil Waste

    A commercial manufacturer of flaxseed oil was having a problem obtaining the FOG and TSS level required by their local POTW. A sample was submitted to our laboratories for treatment analysis. The wastewater was at a pH of 7.0 so no adjustment was required. The sample was treated with Floccin J and the results met their ...


    By Integrated Engineers Inc.

  • Rapid on-site analysis of fats, oil and grease (FOG)

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oils and Grease (FOG) or as much as 19 million gallons from 1998 to 2001 (State of North Carolina, 2004). Our increasingly mobile society has led to a decrease of cooking at home and a significant growth in the commercial food sector. This, on top of other industries such as metal processors, meat packers, cosmetic ...


    By Spectro Scientific

  • Answers to questions about oil waste in California aquifers

    California, the country's third-largest oil-producing state, has improperly given oil companies more than 2,500 permits to inject production fluids and oilfield waste into underground water supplies that are used for drinking water or irrigation, state records show. Nearly half of those disposal wells were approved or first started injections in the last four years under Gov. Jerry Brown, an ...


    By Associated Press

  • Mercury Analysis

    Characteristics of Mercury What is Mercury? Mercury is a naturally occurring silver-colored metallic element noted for its occurrence as a liquid at room temperature and toxic to living organisms. This silvery, opaque liquid metal is very dense, yet has a high surface tension that causes it to form tiny perfect spheres in the pores of the rocks it is found in. It is ...


    By HORIBA Europe GmbH

  • Oil Recovery

    Industrial Wastewater Treatment Success Stories Oil Water Emulsion Wastewater Treatment Industry Oil Recovery - Improved Efficiencies A refinery was having several upsets in their ...


    By Integrated Engineers Inc.

  • Maintaining regulatory method compliance while automating oil and grease analysis

    Regulatory compliance is at the heart of environmental analyses throughout the world. While some regulatory systems provide more flexibility in the methodology used for measuring contaminants, the goal is to gain reliable information that can be used for decision-making. Oil and grease measurement is a simple and important measurement of water quality, but time consuming1. Methods such as US EPA ...


    By Horizon Technology, Inc.

  • Will your oil in water analysis method match the regulatory method?

    Anyone involved in field analysis of oil in water will continually get the question “Does your equipment match the regulatory method?” While the amount of oil in water is highly regulated -- it can also be a challenging measurement. It is complicated by the fact that oil comes in many forms and the measurement is defined by the particular regulatory method. When EPA 1664 is the ...


    By Spectro Scientific

  • Assessment of major solid wastes generated in palm oil mills

    Two multivariate statistical techniques, viz. Discriminant Analysis (DA) and Principal Components Analysis (PCA) were used for the analysis of amount of solid wastes generated, such as Empty Fruit Bunches (EFB), potash ash, fibre and shell, in five different palm oil mills. DA identified two functions responsible for discriminating the mills on the basis of solid waste generated in these mills. ...


    By Inderscience Publishers

  • Ivey-sol technology has potential to increase oil recovery of oil-sands waste by 15-25 percent

    Alberta’s oil sands are comprised of one of the world's largest sources of bitumen, containing an estimated 1.6 trillion barrels. About two tonnes of oil sands must be dug up and processed to produce one barrel of oil. Oil sands recovery processes include extraction and separation systems to remove bitumen from sand and water. Separating the oil from the sand is difficult and costly, and getting ...


    By Ivey International Inc.

  • Waste not, want not

    Consultant Andy Ive considers solutions which not only comply but also enhance the environmental profile of today’s industrial companies. Until recently the prevailing perception in many industries, particularly those operating in emerging market areas has been that waste is an unwelcome inconvenience. The primary infrastructure of most companies was fundamentally not designed to deal with waste ...


    By Ive Design

  • Impact–based cost–benefit analysis model for management of crude oil contaminated agricultural soil

    Evaluating the compensation payable to farmers whose farms/farmlands have been rendered unproductive due to oil spill requires adequate scientific research and improved decision–making. This work proposes a bacterial–based mathematical framework as a decision–support system for evaluating crude oil spill impact on agricultural soil. The rate of 'in situ' biodegradation of the crude oil predicts ...


    By Inderscience Publishers

  • Analysis of the impact of the industrial fat, oil and grease (FOG) on a municipal wastewater treatment plant by means Respirometry and microscopic Bioindication

    The main impact that the industrial fat, oil and grease (FOG) could make in a municipal wastewater treatment plant is mainly coming from its slowly biodegradable COD (sbCOD) The wastewater entering in a municipal WWTP tends to include a percentage of slowly biodegradable COD in the range of 35 to 65% of the total COD; but when this percentage surpasses the habitual range, normally it is due to ...


    By SURCIS, S.L.

  • Different technology options for monitoring oil in produced water – inline continuous monitoring and IR analysis

    No offshore facility wants to be caught with a sheen around their platform as that can result in a costly fine for exceeding discharge permit limits for oil. Onboard oil in water analyzers are necessary to ensure the oil/water separation systems are functioning properly before overboard disposal of the produced water. Bench top analyzers have traditionally been used to test oil in water although ...


    By Spectro Scientific

  • Oil Water Emulsion Wastewater Treatment

    Oil Water Emulsion Wastewater Treatment Industry Oil Recovery - Improved Efficiencies A refinery was having several upsets in their biological system due to high loadings of oils after pretreatment API separators and ...


    By Integrated Engineers Inc.

  • Analysis of Polychlorinated Biphenyls in Fish Oil Using Supelclean EZ-POP NP, Silica Gel SPE, and an SLB-5ms GC Column

    Polychlorinated biphenyls (PCBs) were once widely used in many industrial and commercial applications such as insulating fluids, dielectrics, and lubricants. This included their extensive use in electrical transformers. PCB use has been banned in many countries, and the Stockholm Convention currently prohibits their production and use ...


    By Sigma-Aldrich Co., LLC

  • Defining solid waste

    Simultaneous to the publication of the final National Emission Standards for Hazardous Air Pollutants for Boilers (the Boiler NESHAP) and the Commercial and Industrial Solid Waste Incinerator (CISWI) Rules, EPA issued a new regulation that for the first time defines what materials are a non-hazardous solid waste when combusted. This rule, Solid Wastes Used as Fuels or Ingredients in Combustion ...


    By Trinity Consultants

  • Oil Spill Eater, Solution Oil Spillage in Niger Delta

    Oil Spill Eater II is the name of a non-toxic product which provides the means for moving oil spill response out of its 19th Century methodology into the realm of advanced technological 21st Century breakthroughs for addressing and remediating 100% of any spill in any environment.  In comparison, current response methods employed by three major oil companies - BP, Exxon and Shell - are ...

  • Principles of Waste Avoidance and Utilization

    The minimization of wastes requiring disposal is increasingly important as available disposal options become more and more constrained, and particularly as more substances enter everyday use which are not readily decomposed in the natural environment and which can present long term hazards. This note sets out some basic principles for waste minimization in industrial processes, where ...


    By The World Bank

  • Bioremedation and TPH analysis at Lumwana Copper Mine in Zambia

    MINING SITE: Equinox Minerals operates the biggest copper mine in Africa located at Lumwana in Northwest province Zambia.  Open pit mining methods are used to access the ore which is hauled to the process plant where it is crushed and processed into final concentrate. The mine operates a large fleet of equipment, including 27 EH4500 dump trucks, 5 shovels, 4 excavators ...


    By Sitelab Corporation

  • Biodiesel Feedstock Analysis 2nd Generation of Biofuels

    The main obstacle in biodiesel production from waste fats and oils is their high free fatty acid content. Its precise measurement helps Professor Karel Kolomaznik’s Faculty of Applied Informatics team at Tomas Bata University in Zlín (Czech Republic) to develop suitable new technology. Biodiesel from waste The Tomas Bata University ...


    By Mettler - Toledo Int. Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you