waste oil combustion Articles

  • Introducing LaserGas III SP CO – a combustion analyzer for rough environments

    NEO Monitors unveils the industry’s most compact CO combustion analyzer suitable for the most demanding environments. LaserGas III CO includes measurement of CH4, H2O and temperature in one single unit designed to reduce risk. Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is ...


    By NEO Monitors AS

  • Combustion Of Heavy Fuels And Liquid Wastes

    This paper describes the design and operating conditions of liquid and gas combustors for heavy fuels and liquid wastes. Lower fuel prices can be achieved by switching from light oil to heavy ones, or combining with unconventional waste fuels. Unconventional waste fuels such as energetic off gases and organic liquid waste require especially designed combustion equipment like a special combustor ...

  • Low emission combustion of Oilgas

    Type     HOFGAS®- IFM4c/2300/150 Commissioning     June 2001 Site     Cistierna (ES) Situation Enervisa SA in Cistierna own a plant for the recycling of old oils. The oil is evaporated and condensed into high-grade fuel. The reclaimed fuel is used in diesel engines for production of electricity as well as in burners for the ...


    By Hofstetter BV

  • Understanding the dangers of combustible dust

    Paper shredding is growing into a big business. Recycling and the green movement certainly planted the seeds, but regulators have added the fertilizer. Industry-changing laws have been passed to govern document security in accounting, healthcare and banking, and shredders of many varieties are becoming the tools of those trades.Five or six years ago Warde Comeaux knew only a few people who ...

  • Remediation of Abandoned Coal Mines Using Coal Combustion Products

    A slurry of mine water and coal combustion fluidized bed ash (FBA) was injected into an abandoned coal mine in Eastern Oklahoma in July 1997. Oil-field technology was used to inject 1.8 Gg (418 tons) of FBA through five wells in 15 hours. Alkaline minerals in the FBA neutralized acidity and imparted alkalinity to the mine water. Thus, this remediation method uses the waste from an industrial ...


  • Oil Filter Elimination

    The need to state strictly and accurately the procedures for the collection and elimination of car oil filters is a topical subject, due to the injuries to health and environment that would be caused by an inappropriate storage and elimination. According to the Italian law, the expression “exhaust oil” identifies any  industrial oil or lubricant with a mineral or synthetic basis which is no more ...


    By SatrindTech Srl

  • Waste-to-energy in Indonesia

    Brief description on Waste-to-energy technologies and particular equipment that the company has designed and manufactured. CV Wirajasa Teknik Industri is offering Waste Oil Burner and Biomass Combustion to replace conventional burners that utilize fossil fuel such as natural oil, synthetic lubricating oil, Biomass Combustion Chambers can be applied in sereal and nut drying, organic fertilizers ...


    By CV Wirajasa Teknik Industri

  • Energotechnological oil shale utilisation by means of an SHCU - a low waste and environmentally sound technological process

    This paper presents the calculated data on the emissions into the environment from the low-waste energotechnological solid heat carrier units (SHCUs) working with oil shales. A comparison of this technology with direct oil shale combustion at a power plant was carried out using the example of an Estonian power plant. The energotechnological plant (ETP) including two units SHCU-3000 with an oil ...


    By Inderscience Publishers

  • Waste Incinerator Project

      Medical Waste Incinerator YD Model is our classic product for market. All series included burning capacity 10kgs per hour, 30kgs per hour,50kgs per hour,100kgs per hour,150kgs per hour,300kgs per hour,500kgs per hour. Up to now, all models sale to all over the world and have good feedback from end-customer. The YD Model medical incinerator have multi-combustion chamber and basic dry ...


  • Defining solid waste

    Simultaneous to the publication of the final National Emission Standards for Hazardous Air Pollutants for Boilers (the Boiler NESHAP) and the Commercial and Industrial Solid Waste Incinerator (CISWI) Rules, EPA issued a new regulation that for the first time defines what materials are a non-hazardous solid waste when combusted. This rule, Solid Wastes Used as Fuels or Ingredients in Combustion ...


    By Trinity Consultants

  • The myth of `residual waste`

    Recently, I was asked by my good friend John Nicholson (a consultant and contributing editor to this magazine) to address a meeting of the Air and Waste Management Association (AWMA) Ontario Sector, regarding my position on generating energy from 'residual waste.' This invitation provided me with the opportunity to research the composition of so-called residual waste -- you know, the roughly 35 ...

  • Tyre Pyrolysis Oil Distillation plant, Tyre Pyrolysis Oil Distillation Unit

    Tyre Pyrolysis Oil Distillation Plant Tyre Pyrolysis Oil Distillation Plant Introduction Reduce pressure distillation new technology , is the new technology are developed as per the characters of tyre oil , plastic oil which refine from waste tyre ,plastic.This new ...

  • Management of Hazardous Wastes

    ' Management of hazardous waste is a growing concern in many countries. The long-term impacts and costs of improper disposal can be very high and the emphasis must be on prevention. A comprehensive management system should include (i) policies, institutions and effective regulations and (ii) adequate and acceptable disposal facilities (either public or private). This note outlines the key ...


    By The World Bank

  • Hazardous Waste Disposal

    Untitled Document Overview We're all aware of the importance of following safety precautions when we work with hazardous chemicals. ...


  • European Oil and Gas from Exploration to End User

    Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...

  • Biomass fired thermal oil heater case study

    This 12 MWth output Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in December 2006. The system has a capacity of 12 MW thermal output producing up to 10MWth of 300°C 10 Barg pressure hot oil, up to 10 tonnes per hour of steam and 2 MWth of 200°C hot air. This is all achieved from one grate heating three separate heat exchanges. The ...


    By Biomass Power Limited (BPL)

  • STEP - System for Solid and Liquid Waste Put to the Test

    Wendy Laursen details the System for Environmental Protection (STEP) system which is being installed inside a twenty-foot ISO container to be trialled onbard the Canadian Coast Guard vessel, Pierre Radisson.   The STEP container houses Terragon's single-drum Micro-Auto Gasifciation System (MAGS) and Wastewater Electrochemical Treatment Technology (WETT).  MAGS aims to ...

  • Thermal Energy Utilization in Waste Tire Recycling

    Thermal energy utilization is one of waste tire recycling methods. Thermal energy utilization is used waste tires as alternative fuel. Is a high calorific value waste tire material, per kg higher calorific value than the wood of 69%, higher than that of bituminous coal 10%, 4% higher than Coke. But  the pollution is seriously direct ...


    By Harden Industries Ltd.

  • How to build waste plastic pyrolysis plant

    Preparation of raw material: The raw material can be waste tire, tyre, plastic or scrap rubber. All if the above wastes can be processed by our machine. The following are details: Separate the ingredient which can not be refined from waste plastic, such as: soil, wood, stone, brick etc. If the raw materials are paper mill’s waste, separate the pulp. If there is water in raw material, should ...


  • Case study - JJO wood waste – biomass

    A UK leading producer of kitchens and bathroom furniture invest in the future of no costs for the disposal of wood waste and no oil or gas bills for heating of the total company site premises. J J O PLC – manufacturer of Colonial Kitchens, Colonial Bedrooms, eco Kitchens and eco Bathrooms. Founded over 100 years ago and now the leading supplier to many of the best outlets within the ...


    By Mawera (UK) Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you