waste oil containment Articles

  • Oil Skimmers Inc., resolves waste oil problems

    Companies that provide reusable containers for shipping of materials and finished goods use a combination of processes to clean and restore the containers between uses. This makes for a wastewater stream full of many types of oils from both the residual contents of the containers and the restoring processes themselves. Of course, these oils must be removed from the water before it can be reused ...


    By Oil Skimmers, Inc.

  • Oil Skimmers, Inc., solves waste oil problems quickly and easily

    Many types of industrial processes create waste oil, which can be time-consuming and expensive to collect, store, and dispose of. Worse yet, without constant effort to remove them, residual oils can build up and cause hazards, contamination, and machine downtime. In the metals industry, oil waste comes from machinery and components used to make steel and other metals, as well as from cleaning ...


    By Oil Skimmers, Inc.

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that were once abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain subs tances ...


    By Oil Skimmers, Inc.

  • Centralised treatment of oil sludge and other industrial waste

    Centralised treatment of various sources of industrial waste has been established in many European countries over the last decade. Many facilities are still equipped with non state of the art technology and therefore cannot fulfil the broad field of applications with regard to industrial waste remediation. econ's international client decided to be one step ahead and erected a new econ industries ...

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that once were abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain substances ...


    By Oil Skimmers, Inc.

  • Oil skimmers solutions guide: oil services industry

    Retif Oil & Fuel Inc. is one of the top petroleum specialty products distributors in the nation, offering customers a full range of services from commercial and retail deliveries to on- and off-site refueling services. The company has served the greater New Orleans area through three facilities since 1965 and has a commitment to serve an expanded market throughout the entire Gulf Coast. ...


    By Oil Skimmers, Inc.

  • Oil Recovery

    Industrial Wastewater Treatment Success Stories Oil Water Emulsion Wastewater Treatment Industry Oil Recovery - Improved Efficiencies A refinery was having several upsets in their ...


    By Integrated Engineers Inc.

  • Useful tips to efficiently deal with waste fat, oils and grease

    Waste fat, oils, and grease (FOG) are a huge problem. It doesn’t matter whether it’s industrial or domestic waste fats or oil, it all needs to be disposed of responsibly. There are already schemes that convert waste cooking oils and fats into eco-friendly B20 biodiesel. Transport for London is leading the way with ...

  • Regeneration of used oil

    Used oil regeneration technologies Over time, oil accumulates oxidation products, contaminants and impurities which drastically reduce its quality. Contaminated oil can no longer meet quality requirements and must be changed. Waste oil is collected and regenerated to retain valuable basic materials. Oil cannot be recycled at petroleum processing plants with ...


    By GlobeCore GmbH

  • Oil waste management through large scale landfarming: a case study

    The operational activities of the oil industry generate solid waste containing several classes of hydrocarbons. Landfarming enables the treatment of large amounts of oil waste through the disposal of waste in the reactive soil layer and hydrocarbon biodegradation. The aim of the present study was to evaluate oil waste management in a 1,000 m² of landfarming area. The operational method used in ...


    By Inderscience Publishers

  • A Recycling Exemption for Oil/Water Separator Wastes at a Large Military Base in California

    The Health & Safety Code (HSC) in California contains provisions that can exempt a recyclable material from categorization as a hazardous waste if certain strict criteria are met. The Department of Toxic Substances Control (DTSC) is wary of 'sham' recycling and requires substantial proof of beneficial reuse for a facility to qualify for this exemption under HSC 25143.2. A large military ...


    By Coto Consulting, Inc.

  • Ivey-Sol Technology has potential to increase oil recovery of oil-sands waste by 15-25 percent

    Alberta’s oil sands are comprised of one of the world's largest sources of bitumen, containing an estimated 1.6 trillion barrels. About two tonnes of oil sands must be dug up and processed to produce one barrel of oil. Oil sands recovery processes include extraction and separation systems to remove bitumen from sand and water. Separating the oil from the sand is difficult and costly, and getting ...


    By Ivey International Inc.

  • Foundry by products and casting waste

    There are lots of waste elements generated by the casting process, creating a waste stream that requires specific handling in order to minimise the risk of land contamination, both through the handling process and the storage and disposal of raw materials ...


    By Inciner8 Limited

  • Centralised treatment of oil sludge and other industrial waste - case study

    Centralised treatment of various sources of industrial waste has been established in many European countries over the last decade. Many facilities are still equipped with non state of the art technology and therefore cannot fulfil the broad field of applications with regard to industrial waste remediation, econ's international client decided to be one step ahead and erected a new econ industries ...

  • Estimation of HAP Emissions from Oil and Gas E&P Operation Wastes

    Wastes generated from oil and gas Exploration and Production (E&P) operations contain chemicals that are considered as toxic air pollutants for the purpose of toxic release inventories (TRI) reports or hazardous air pollutants (HAP) under Title III of the 1990 Clean Air Act Amendments. A study was conducted to estimate HAP emissions from E&P waste management operations on a per-event basis. The ...


    By Trinity Consultants

  • CH#952 - Oil Contaminated Soil

    SITE OWNER: A National Overnight Express Package Company SITE SURVEY: Site and geological surveys revealed a contaminated area north of the facility and west of a diesel tank pit. The cause of the contamination was the result of two (2) underground storage tanks (UST™). One tank contained waste oil while the other contained new oil. Both tanks had ...

  • TerraTherm to Remediate Soils at the Beede Waste Oil Superfund Site - Case Study

    The Beede Site is the former location of a state-licensed and regulated waste oil recycling and disposal facility. The nearly 41-acre Site is located in a residential area of Plaistow, New Hampshire (NH). Operations at the Site began in the 1920s, and continued until the state of NH ordered its closure in 1994. From the 1920s to 1994, thousands of NH residents and businesses were customers of the ...

  • Oil and Gas Development - Onshore Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Waste not, want not

    Consultant Andy Ive considers solutions which not only comply but also enhance the environmental profile of today’s industrial companies. Until recently the prevailing perception in many industries, particularly those operating in emerging market areas has been that waste is an unwelcome inconvenience. The primary infrastructure of most companies was fundamentally not designed to deal with waste ...


    By Ive Design

  • Treatment of salt affected soil in the oil field

    Soils, drill cuttings and other solid wastes which are exposed to high levels of salt through spillage from drilling and producing operations, pipe line breaks or leaks, become saturated with sodium. Although the EPA and the industry have demonstrated that the vast majority of such wastes are non-hazardous, in actuality, they have an adverse impact on the fertility of the soil. The degree of salt ...


    By SOS Environmental, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you