waste oil furnace manufacturer Articles

  • `Must Do` Waste Oil Furnance Maintenance

    Recommendations to keep your waste oil burner running at peak performance and resistant to mechanical issues, including a list of typical standard maintenance measures. Getting into a scheduled maintenance routine and making sure you're keeping your furnace running smoothly will keep it generating free heat for your business for many years to come. Failure to maintain your waste oil furnace ...

  • Automotive parts manufacturer case study

    Scope The heat-treating operation at this major automotive bearing manufacturer in Georgia involves quenching parts with oil followed by an aqueous cleaning proc-ess. Two cleaning tanks were dumped and re-charged weekly when they became too contaminated to clean parts effectively. The parts were susceptible to staining when the cleaning solution became overly contaminated and the ...


    By Separation Dynamics

  • Iron and Steel Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Pyrolysis Oil Specifications

    Pyrolysis oil is the end product of waste plastic and tyre pyrolysis. Pyrolysis oil is widely used as industrial fuel to substitute furnace oil or industrial diesel. Typical industrial applications of pyrolysis oil as a fuel: Boilers Furnaces ...

  • Glass Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Coke Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Waste Fuel Case History

    The Customer The company engages in the design, manufacture, and sale of machinery for decomposing petroleum-based materials. The company uses microwave technology for recovering hydrocarbons and fossil fuels from sources, such as tires, oil shale, capped wells, coal, automotive shredded residue, municipal solid waste, shale deposits, and waste oil streams. The ...

  • European Oil and Gas from Exploration to End User

    Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...

  • Foundries Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Allegheny Ludlum uses Abanaki to support world-class wastewater treatment standards

    Allegheny Ludlum Corporation is a world leader in the technology, production and marketing of specialty materials - from stainless and silicon- electrical steels to titanium, nickel alloys and other advanced alloys. Its customers represent diversified consumer and capital goods markets in more than 30 nations. In keeping with the company's ISO 9001-certified quality system, the leader goes well ...


    By Abanaki Corporation

  • Generation using gas-fuelled engines in South Africa – an overview

    Most gas engines are Otto cycle spark ignition internal combustion reciprocating engines using natural gas as the primary fuel. Smaller models utilise stochiometric combustion while the larger engines are lean burn engines with pre-chamber ignition systems. The engines are coupled with packaged generator sets, ...


    By Clarke Energy

  • Thermal deoilers - Thermal deoiling of evaporator coils for air conditioners

    The Problem A major Air Conditioning company was mandated to have an alternate technology for degreasing evaporator fins. They had, until recently, been deoiling metal parts in a conveyorized solvent based vapor degreasing line, but the state environmental agency mandated that the line be shut down on a certain date due to the excessive water and air pollution it generated. The company ...


    By Epcon Industrial Systems, LP

  • Thermal deoilers - Thermal deoiling replaces liquid based degreasing

    The Problem A major Automotive company was mandated to have an alternate technology for degreasing evaporator fins. They had, until recently, been deoiling metal parts in a conveyorized solvent based vapor degreasing line, but the state environmental agency mandated that the line be shut down on a certain date due to the excessive water and air pollution it generated. The company had ...


    By Epcon Industrial Systems, LP

  • Mini Steel Mills Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Corus installs gem steam traps to improve energy conservation and reduce co2 emissions

    Corus’s Trostre Steel Works in Llanelli, South Wales has installed Thermal Energy International’s GEM Venturi orifice steam traps as part of the plant’s continuous improvement programme into energy conservation and CO2 reduction.  A leading supplier of high quality light gauge steels, the site produces over 400,000 tonnes a year of packaging steels for the UK market. As ...

  • Economy in car-making - powder metallurgy

    Powder metallurgy (PM) has made a major contribution to the technology of automotive manufacture over the past 70 years. It has been and is still the fastest-growing metalworking technology. Today, on average, it provides about 10kg of the total components of a car — more in the US, where cars are larger and use automatic transmissions in nearly all units sold and less in Europe and Japan, ...

  • Plan B efficiency and conservation measures drop energy demand by 2020

    Projections from the International Energy Agency show global energy demand growing by close to 30 percent by 2020, setting the stage for massive growth in the carbon dioxide emissions that are warming our planet. But dramatically ramping up energy efficiency would allow the world to not only avoid growth in energy demand but actually reduce global demand to below 2006 levels by 2020. We can ...


    By Earth Policy Institute

  • Mishandling of Hazardous Materials & Contaminants, Asbestos, Lead, Mould & Fungus, PCB`S

    Untitled Document Everyday in Canada and the United States Hazardous Materials are being removed improperly contaminating the buildings we occupy. The hazardous materials including ...

  • Real-time TOC tightens effluent control at Greencore

    A food manufacturing facility in Selby has installed a new continuous TOC (Total Organic Carbon) monitor, ‘the BioTector’ which has dramatically improved the site’s capability to refine and improve the plant’s wastewater treatment process. As a result the plant is better able to quickly respond to changes in the influent. Greencore Foods is a leading player in the food ...


  • Summary and Conclusions of the Study

    Background and objectives According to 'Affald 21', the Danish national waste plan for the period of 1998-2004 (Ministry of Environment and Energy, 1999) recycling of household waste should be increased over the coming years. The plan is focused on increasing sorting and collection from the households, in which glass is one of the fractions.The first objective of this project is to examine ...


    By 2.-0 LCA consultants

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you