waste oil heater Articles

  • 3 Reasons Your Business Should Have a Waste Oil Heater

    All businesses that generate petroleum waste run up against similar challenges. Regulations and increasing energy costs to keep operations going certainly don’t make it easy to maintain a healthy bottom line. But along with those challenges, there are opportunities - thanks to waste oil heaters that burn used motor oil, transmission fluid and other petroleum products. With the benefits of ...


    By Clean Energy Heating Systems

  • 8 Types of Businesses that Can Save BIG with a Waste Oil Heater

    Besides the attraction of their environmentally-friendly attributes, waste oil heaters are emerging as a “must have” for certain types of businesses for an even more compelling reason: A waste oil furnace can literally convert an otherwise worthless by-product into substantial savings on energy costs. So, if you’ve got a business that generates used petroleum products in your ...


    By Clean Energy Heating Systems

  • Biomass fired thermal oil heater case study

    This 12 MWth output Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in December 2006. The system has a capacity of 12 MW thermal output producing up to 10MWth of 300°C 10 Barg pressure hot oil, up to 10 tonnes per hour of steam and 2 MWth of 200°C hot air. This is all achieved from one grate heating three separate heat exchanges. The ...


    By Biomass Power Limited (BPL)

  • Introducing LaserGas III SP CO – a combustion analyzer for rough environments

    NEO Monitors unveils the industry’s most compact CO combustion analyzer suitable for the most demanding environments. LaserGas III CO includes measurement of CH4, H2O and temperature in one single unit designed to reduce risk. Based on decades of experience and customer feedback, NEO Monitors has designed an Ex-d certified tunable diode laser (TDLS) analyzer. The instrument is ...


    By NEO Monitors AS

  • Hurricane HR Cyclones to capture fine fly ash particulate enabling the use of wood waste fired thermal oil heater for Sonae Indústria - Case Study

    The company was forced to use a natural gas fired hot gas generator for drying fibre despite having the necessary amount of thermal energy available in the exhaust stream of a wood waste fired thermal oil heater. The problem of using the biomass thermal oil heater laid on the emission of fine burnt and unburnt particulate which were carried over with the dried fibre and finally deposited on the ...

  • `Must Do` Waste Oil Furnance Maintenance

    Recommendations to keep your waste oil burner running at peak performance and resistant to mechanical issues, including a list of typical standard maintenance measures. Getting into a scheduled maintenance routine and making sure you're keeping your furnace running smoothly will keep it generating free heat for your business for many years to come. Failure to maintain your waste oil furnace ...

  • You Don’t Need to Generate Waste Oil to Save Money with a Waste Oil Furnace

    Waste oil furnaces can save on energy expenses for businesses who convert their used petroleum products into fuel for heat. Cutting costs by recycling waste oil makes good bottom line business sense. And waste oil heaters also help companies act on their commitment to preserving the environment by reusing potentially hazardous waste and preventing it from entering the eco-system. For companies ...


    By Clean Energy Heating Systems

  • Pyrolysis Oil Specifications

    Pyrolysis oil is the end product of waste plastic and tyre pyrolysis. Pyrolysis oil is widely used as industrial fuel to substitute furnace oil or industrial diesel. Typical industrial applications of pyrolysis oil as a fuel: Boilers Furnaces ...

  • 7 Questions You Should Ask a Waste Oil Furnace Salesperson Before You Buy

    As with any other business purchase, you should do your homework before making the decision to buy a waste oil furnace. Any open, honest salesperson from a reputable company will be happy to inform and educate you on what you can expect from installing a waste oil burner in your facility. Being in the know to make an empowered buying decision is your first step to gaining the cost-savings and ...

  • Client - Oil Refinery, Eastern Europe

    Project - Heavy Oil Pre-Heater As part of an overall facility upgrade this major oil refinery decided to seek ways of reducing its heavy oil pre-heating costs. A proposal was submitted that would enable waste heat from the refinery to be used as the source to safely pre-heat the stored heavy oil. The solution proposed the use of a gas to water recovery unit coupled to two heat pipe ...


    By Econotherm UK Ltd

  • Defining solid waste

    Simultaneous to the publication of the final National Emission Standards for Hazardous Air Pollutants for Boilers (the Boiler NESHAP) and the Commercial and Industrial Solid Waste Incinerator (CISWI) Rules, EPA issued a new regulation that for the first time defines what materials are a non-hazardous solid waste when combusted. This rule, Solid Wastes Used as Fuels or Ingredients in Combustion ...


    By Trinity Consultants

  • Wood waste case study - Pronto Joinery

    A joinery company in Norwich has replaced three wood waste heaters with brand new ones from Wood Waste Technology. Pronto Joinery provides both the general public and trade with wooden replacement windows and doors from its purpose built factory in Horsford. The company has used wood waste burners for many years, but wanted to replace its existing heaters with newer ones to benefit from enhanced ...


    By Wood Waste Technology Ltd

  • Wood waste case study - Zero 1 Exhibitions

    A joinery company in Norwich has replaced three wood waste heaters with brand new ones from Wood Waste Technology. Pronto Joinery provides both the general public and trade with wooden replacement windows and doors from its purpose built factory in Horsford. The company has used wood waste burners for many years, but wanted to replace its existing heaters with newer ones to benefit from enhanced ...


    By Wood Waste Technology Ltd

  • Wood waste case study - Jukes Holdings

    The MD of a group of independent coffin manufacturers has seen the light in recycling wood waste, and is saving thousands of pounds in waste disposal charges and heating costs by rolling out wood waste heaters across his companies. Stewart Jukes, MD of Jukes Holdings Ltd was so impressed with a wood waste heater purchased for one of his companies, Brian Reid & Son in Scotland, that he has ...


    By Wood Waste Technology Ltd

  • Oil refinery vapour gas case study

    1.0 Evaluation of Refinery Gases Various refinery gases are generated in the process of oil refining. These vary, depending upon the type of crude oil being distilled, such as Reduced Crude distillation, or Naphtha cracker. For the purposes of this case study the description and range of refinery gases are those gases produced from refining Crude Oil and Reduced Crude only. Crude ...

  • Chemical, Physical, Mineralogical, Morphology Characteristics of a Thermal Power Plant Washing Waste

    Most of electricity is generated by thermal power plants in Iran. Shahid Rajaee thermal power plant consists of four 250MW natural gas and fuel oil burning units that is located at 100 km west off Tehran. As a result of fuel oil burning in winter time, boilers air heaters are washed and cleaned frequently. The wastewater originating from air heater washing contains suspended ...


    By University of Tehran

  • Steam injection heating of biosolids & sludge for Anaerobic Digestion

    The article focuses on the integration of Direct Steam Injection (DSI) heating as a method for heating of Municapal, Industrial, Food, & Agricultural wastewater streams. Common applications are anerobic digestion, biogas production, waste de-activation, and FOG (Fats-Oils-Grease) heating. Topics covered include how DSI works, how to select a DSI heater suitable for viscous & difficult to ...


    By ProSonix

  • Dazed and Confused: Alternative fuels and the CISWI definitions rule

    As discussed in ALL4’s December 2008 issue of 4 The Record, the use of alternative and non-traditional fuels for heat and power generation is on the rise, an increase that can be attributed to the price surge and volatility of traditional fossil fuels, as well as to a general desire to use more environmentally friendly materials to reduce greenhouse gas emissions. Alternative fuels have been ...


    By All4 Inc.

  • New boiler MACT and affiliated rules proposed

    EPA proposed three related rules (with final rules expected by December 16, 2010), intended to reduce the emission of hazardous air pollutants (HAPs) from industrial, commercial, and institutional boilers and process heaters as well as commercial and industrial solid waste incinerators. Simultaneously, it also proposed a definition of solid waste that could potentially affect some units currently ...


    By Trinity Consultants

  • EPA issues final rules for boilers

    The U.S. Environmental Protection Agency (EPA) reports that more than 200,000 boilers, process heaters and incinerators will be impacted by a set of Clean Air Act regulations issued on February 21, 2011. Since EPA first proposed the ...


    By Bergeson & Campbell, P.C.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you