waste oil recovery Articles

  • Oil Recovery

    Industrial Wastewater Treatment Success Stories Oil Water Emulsion Wastewater Treatment Industry Oil Recovery - Improved Efficiencies A refinery was having several upsets in their ...


    By Integrated Engineers Inc.

  • Oil recovery reduces sewer cleaning

    Doskocil Food Service Company, a division of Foodbrands America, Hutchinson, Kan., produces 2 million pounds of pizza toppings a week. After cooking, the meat toppings are flash-frozen in one of two spiral freezers. Air currents within the freezer carry grease-containing vapors through the ammonia freezer coils, where they adhere and become lodged. Doskocil uses 1,600 gallons of water per hour to ...


    By Oil Skimmers, Inc.

  • Oil Skimmers Inc., resolves waste oil problems

    Companies that provide reusable containers for shipping of materials and finished goods use a combination of processes to clean and restore the containers between uses. This makes for a wastewater stream full of many types of oils from both the residual contents of the containers and the restoring processes themselves. Of course, these oils must be removed from the water before it can be reused ...


    By Oil Skimmers, Inc.

  • Enhanced oil recovery scheme in the sultanate of oman

    The Facility This project is an Enhanced Oil Recovery Field and is located in the South-Central area of the Sultanate of Oman, approximately 660 kilometers from Muscat and 560 kilometers from Salalah. The design requirements for this Development are similar to most self-sufficient oilfields in a remote desert environment. The primary differences are the steam generation and ...

  • Oil Skimmers, Inc., solves waste oil problems quickly and easily

    Many types of industrial processes create waste oil, which can be time-consuming and expensive to collect, store, and dispose of. Worse yet, without constant effort to remove them, residual oils can build up and cause hazards, contamination, and machine downtime. In the metals industry, oil waste comes from machinery and components used to make steel and other metals, as well as from cleaning ...


    By Oil Skimmers, Inc.

  • Ivey-Sol Technology has potential to increase oil recovery of oil-sands waste by 15-25 percent

    Alberta’s oil sands are comprised of one of the world's largest sources of bitumen, containing an estimated 1.6 trillion barrels. About two tonnes of oil sands must be dug up and processed to produce one barrel of oil. Oil sands recovery processes include extraction and separation systems to remove bitumen from sand and water. Separating the oil from the sand is difficult and costly, and getting ...


    By Ivey International Inc.

  • What is energy recovery?

    Processes like incineration and anaerobic digestion not only provide sources of energy, but they also reduce waste volume The term “energy recovery” often is applied only to a narrow number of methods for converting wastes into energy, when in fact it applies to a broad range of technologies used to create heat, electricity, or fuel. Energy recovery gives ...


    By Fluence Corporation

  • Mercury recovery from industrial waste - Case study

    Mercury recovery from industrial waste and toxic residues of natural gas drilling econ industries' client in the east of Germany is one of the few specialised companies in Europe for the treatment of mercury contaminated waste. Typical input material for this type of treatment is sludge from the natural gas industry or other residues from chemical processes, i.e. contaminated filter cake ...

  • Centralised treatment of oil sludge and other industrial waste

    Centralised treatment of various sources of industrial waste has been established in many European countries over the last decade. Many facilities are still equipped with non state of the art technology and therefore cannot fulfil the broad field of applications with regard to industrial waste remediation. econ's international client decided to be one step ahead and erected a new econ industries ...

  • Drilling oil recovery from drill cuttings - Case study

    Recovery of drilling oil and drilling fluids from different drill cuttings Drill cuttings are an increasing waste stream worldwide, econ industries addressed the challenge by developing a process that cleans the waste and at the same time recovers valuable drilling oil. The VacuDry® plant started the successful processing of drill cuttings in autumn 2013. ...

  • Separation and recovery of oil from oily waste materials using anaerobic thermal desrotpion unit technology

    RLC Technologies, Inc.’s Anaerobic Thermal Desorption Unit (ATDU) is an exsitu, non-incineration technology designed to separate hydrocarbons from various matrices including oilfield waste, soil, sludge, sand, filter-cake, tank and tanker bottoms, organic-based hazardous waste and contaminated soil in a non-oxidizing atmosphere without destroying the hydrocarbons. This paper briefly ...


    By RLC Technologies, Inc.

  • Water glycol recovery saves over $20,000

    The Problem: At a mid-Michigan automotive supplier, a shutdown was imminent. Accidental cross-contamination between fire-resistant and oil-based hydraulic fluids in a bulk tank left the plant vulnerable to fire. If plant employees topped off or filled their reservoirs from the direct-fill system available at each machine, the risk of a fire propagating in the plant would greatly increase. ...

  • Oil grabber® model 8 recovers 70% of quench oil

    An oil skimmer for use on heated spray wash tanks in a Midwestern heat treating firm has enabled the company to recover 70% of their quench oil from the washing solution, materially aiding their energy conservation program. Recovery and recirculation of 70 % of the quench oil is considered an exceptionally high level of efficiency according to Mr. James Reh, Plant Engineer for Lindberg Heat ...


    By Abanaki Corporation

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that were once abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain subs tances ...


    By Oil Skimmers, Inc.

  • Common challenges relative to the use of Decanter Centrifuges for barite recovery in the oil & gas industry

    When centrifuges are properly deployed, they can have dramatic effects on drilling performance. In fact, without them, many of the advances made in drilling would not have been considered achievable. Classically, we believe that centrifuges can achieve two common goals: Reduce the content of drilled fines, specifically colloidal solids, and Perform barite recovery in order to reduce ...


    By Elgin Separation Solutions

  • Biosurfactants as demulsifying agents for oil recovery from oily sludge – performance evaluation

    The oil producing and petroleum refining industries dispose of a significant amount of oily sludge annually. The sludge typically contains a mixture of oil, water and solid particles in the form of complex slurry. The oil in the waste sludge is inextractible due to the complex composition and complex interactions in the sludge matrix. The sludge is disposed of on land or into surface water ...


    By IWA Publishing

  • TerraTherm to Remediate Soils at the Beede Waste Oil Superfund Site - Case Study

    The Beede Site is the former location of a state-licensed and regulated waste oil recycling and disposal facility. The nearly 41-acre Site is located in a residential area of Plaistow, New Hampshire (NH). Operations at the Site began in the 1920s, and continued until the state of NH ordered its closure in 1994. From the 1920s to 1994, thousands of NH residents and businesses were customers of the ...

  • Oil Skimmer system helps the Hide Tanning Industry

    OIL SKIMMER SYSTEMS HELP TANNING INDUSTRY IMPROVE QUALITY, SAVE MONEY, MEET ENVIRONMENTAL REGSThe Oil Skimmers Model 6V and 5H oil recovery systems are helping the tanning industry deal with the age-old problems of hide treatment and the new challenge of complying with strict environmental regulations.THE PROBLEMWhen hides are tanned, they are treated with a substance called chrome ...


    By Oil Skimmers, Inc.

  • Centralised treatment of oil sludge and other industrial waste - case study

    Centralised treatment of various sources of industrial waste has been established in many European countries over the last decade. Many facilities are still equipped with non state of the art technology and therefore cannot fulfil the broad field of applications with regard to industrial waste remediation, econ's international client decided to be one step ahead and erected a new econ industries ...

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that once were abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain substances ...


    By Oil Skimmers, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you