waste oil testing Articles

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • Oil Skimmers Inc., resolves waste oil problems

    Companies that provide reusable containers for shipping of materials and finished goods use a combination of processes to clean and restore the containers between uses. This makes for a wastewater stream full of many types of oils from both the residual contents of the containers and the restoring processes themselves. Of course, these oils must be removed from the water before it can be reused ...


    By Oil Skimmers, Inc.

  • Innovations in Bench Testing of Waste waters

    Wastewater management in developing countries throughout the world is in a state of crisis. It is estimated that 2.6 billion people worldwide live without adequate sanitation. Resources are scarce, previous management systems have failed, and traditional techniques and solutions are not immediate enough, too expensive, or simply inefficient. Discussion with regards to OI Analytics Instrumentation ...


  • Factors Affecting Oil in Water Testing Methods

    Various factors need to be considered when comparing methods to measure oil and grease in water.  Whether you are trying to meet effluent limits for an NPDES (National Pollutant Discharge Elimination System) permit, comply with oil and grease limits for the Clean Water Act (CWA), or an industry satisfying a POTW’s (Publically Owned Treatment Works) discharge permit, it is ...


    By Spectro Scientific

  • STEP - System for Solid and Liquid Waste Put to the Test

    Wendy Laursen details the System for Environmental Protection (STEP) system which is being installed inside a twenty-foot ISO container to be trialled onbard the Canadian Coast Guard vessel, Pierre Radisson.   The STEP container houses Terragon's single-drum Micro-Auto Gasifciation System (MAGS) and Wastewater Electrochemical Treatment Technology (WETT).  MAGS aims to ...

  • Oil Skimmers, Inc., solves waste oil problems quickly and easily

    Many types of industrial processes create waste oil, which can be time-consuming and expensive to collect, store, and dispose of. Worse yet, without constant effort to remove them, residual oils can build up and cause hazards, contamination, and machine downtime. In the metals industry, oil waste comes from machinery and components used to make steel and other metals, as well as from cleaning ...


    By Oil Skimmers, Inc.

  • Oil Field Produce Waste Water Treatment

    Oily Waste Produce Water Treatment Oil Field Produce Waste Water Treatment Testing Produce Water Oil Field Production The oil industry has been ...


    By Integrated Engineers Inc.

  • Answers to questions about oil waste in California aquifers

    California, the country's third-largest oil-producing state, has improperly given oil companies more than 2,500 permits to inject production fluids and oilfield waste into underground water supplies that are used for drinking water or irrigation, state records show. Nearly half of those disposal wells were approved or first started injections in the last four years under Gov. Jerry Brown, an ...


    By Associated Press

  • Oil Recovery

    Industrial Wastewater Treatment Success Stories Oil Water Emulsion Wastewater Treatment Industry Oil Recovery - Improved Efficiencies A refinery was having several upsets in their ...


    By Integrated Engineers Inc.

  • Reduction of Waste from Synthetic Rubber Testing and Unreacted Styrene: Kemcor Australia

     Kemcor Australia has used cleaner production processes to reduce waste from synthetic rubber testing and unreacted styrene in small batch production, with significant cost savings. Background Kemcor Australia is a leader in the production of olefins, poly-olefins and synthetic rubber, and is part of the Altona (Victoria) chemical complex, the largest centre for primary ...


  • A Recycling Exemption for Oil/Water Separator Wastes at a Large Military Base in California

    The Health & Safety Code (HSC) in California contains provisions that can exempt a recyclable material from categorization as a hazardous waste if certain strict criteria are met. The Department of Toxic Substances Control (DTSC) is wary of 'sham' recycling and requires substantial proof of beneficial reuse for a facility to qualify for this exemption under HSC 25143.2. A large military ...


    By Coto Consulting, Inc.

  • Ivey-sol technology has potential to increase oil recovery of oil-sands waste by 15-25 percent

    Alberta’s oil sands are comprised of one of the world's largest sources of bitumen, containing an estimated 1.6 trillion barrels. About two tonnes of oil sands must be dug up and processed to produce one barrel of oil. Oil sands recovery processes include extraction and separation systems to remove bitumen from sand and water. Separating the oil from the sand is difficult and costly, and getting ...


    By Ivey International Inc.

  • Waste not, want not

    Consultant Andy Ive considers solutions which not only comply but also enhance the environmental profile of today’s industrial companies. Until recently the prevailing perception in many industries, particularly those operating in emerging market areas has been that waste is an unwelcome inconvenience. The primary infrastructure of most companies was fundamentally not designed to deal with waste ...


    By Ive Design

  • Oil skimmers solutions guide: oil services industry

    Retif Oil & Fuel Inc. is one of the top petroleum specialty products distributors in the nation, offering customers a full range of services from commercial and retail deliveries to on- and off-site refueling services. The company has served the greater New Orleans area through three facilities since 1965 and has a commitment to serve an expanded market throughout the entire Gulf Coast. ...


    By Oil Skimmers, Inc.

  • Oil Water Separation

    An industrial facility imports oily wastes and separated them using a thermal process. The process raises the oil water temperature to 180 degrees F and uses insulated tanks to obtain an oil/water split. The facility had a 3-day workweek processing 100-200K gallons/day and then maintenance of the equipment the rest of the workweek and often weekend(s). The majority of the work was keeping the ...


    By Integrated Engineers Inc.

  • Rapid Field-Screening of Waste Oil/Solvent Drums with Horizontal ATR / Fast-Screening IR Spectroscopy

    While the growth of technology and industry has given us a high standard of living, it has also given us a greater amount of waste products to deal with. A significant portion of the waste is either buried underground or stored in abandoned warehouses. Some of this waste material may be harmless and innocuous, and some may be quite hazardous; but all of it must be tested by some procedure to ...


    By Buck Scientific Inc

  • Effect of fuel additives on performance and exhaust emissions of direct injection diesel engine operating on B20 waste fish oil

    The ever increasing diesel consumption, rapid depletion of fossil fuels and environmental concern has prompted an intensive use of biodiesel produced from various sources. In this study, biodiesel (ethyl ester of fish oil) was prepared from fish oil and different blends of biodiesel–diesel (B20, B40, B60, B80 and B100) were examined in a single cylinder, constant speed, and direct injection ...


    By Inderscience Publishers

  • Development and measured performance of a batch reactor for biodiesel production from fresh and waste vegetable oils

    The development and measured performance of a batch reactor for biodiesel production from fresh and waste vegetable oils as feedstock is presented. A biodiesel batch reactor was fabricated using locally sourced materials. Three different transesterification reactions were performed on the feedstocks using the fabricated reactor. The reaction temperature and time were varied for the fresh and ...


    By Inderscience Publishers

  • Adsorption of ammonium using waste activated sludge from palm oil mill effluent treatment plant

    Low cost adsorbent was prepared using waste activated sludge (WAS) from a palm oil mill effluent (POME) treatment plant, and used to adsorb ammonium from aqueous solution. The effect of initial concentration, temperature, pH and adsorbent dose was studied in batch test to determine the kinetic and thermodynamic properties. The results showed that the uptake of ammonia increased with an increase ...


    By Inderscience Publishers

  • Treatment of ship sludge oil using a plasma arc waste Destruction system (PAWDS)

    The Plasma Arc Waste Destruction system (PAWDS) uses a plasma torch to quickly gasify solid  waste on board ships. Developed under the support of the US Navy, this compact one deck system has been in commercial operation on board a cruise ship for more than three years. With the support of Carnival Cruise Lines and the National Research Council of Canada, the PAWDS was recently modified in ...


    By PyroGenesis Canada Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you