waste plastic Articles

  • Plastic Waste Management in India

    Plastic waste is recycled in India in an “unorganized” way. 60% of the plastic-waste collected and segregated gets recycled back into materials for further processing into consumer products, while the balance is left unutilized. Regulations and legislations are being enforced in two States of India viz. Haryana and Himachal pradesh, while a National Plastic Waste Management Council Task Force has ...


  • Plastics Waste Pyrolysis Optimisation

    This paper presents the optimisation of experimental parameters (run temperature, initial pressure, reaction time, and plastic waste feed) on plastic wastes pyrolysis total conversion and on yields of both gases and liquids. The plastic waste used will include, different compositions of the more abundant plastics in municipal solid wastes: polyethylene (PE), polypropylene (PP) and polystyrene ...


  • The safe extraction of valuable raw materials: robots automatically dismantle monitors containing mercury, while protecting workers’ health at the same time

    Machine handles up to 45 monitors per hour. According to initial projections, around three million LCD screens will be recycled in Germany in 2016. However, their backlighting system often contains mercury, which means they are classified as ‚hazardous waste‘ in accordance with the EWC, and as ‚Collection Group 3‘  in accordance with the Electrical and Electronic ...

  • Electrostatic Separation of Mixed Plastics Waste

    A major environmental problem is mixed plastics waste. Because of the incompatibilities of the properties of different polymers, mixed waste is either land filled or reused in low value applications such as plastic wood. The barrier to economic re-use of these materials is separation into pure components. Recycled pure plastics can be used in place of virgin material and thereby much of the ...


  • Determining Proper Cooling Tower Size

    To maximize water-based cooling tower benefits, the appropriate tower size must be selected, requiring the identification of several critical factors. Cooling towers are a relatively inexpensive and reliable way of expelling heat from a number of industrial processes, including nuclear & thermal power plants, petroleum refineries, petrochemical plants, food processing plants, as well as HVAC ...


    By Delta Cooling Towers, Inc

  • High-quality plastics from waste electrical equipment

    All over Europe, electrical and electronic scrap is the waste stream showing the highest growth rates. Since electronic equipment contains the most varied kinds of materials, the recycling of such waste involves high demands with respect to separation and sorting processes. The German plant manufacturer MeWa builds state-of-the-art recycling plants for large international waste management ...


    By Sesotec GmbH

  • The future of plastics - Is there a solution to this huge waste management problem?

    Plastic - it has become the cornerstone of our modern life style, and one of the most challenging global waste management problems. So beneficial in countless ways, this nearly indestructible material is littering our environment on land and sea. Difficult to recycle, as post-consumer waste, and hard to break down, plastic in its many forms has become a serious environment problem. But solutions ...


    By GLOBE Foundation

  • Domestic mixed plastics packaging: waste management options

    Mixed plastics is a term that covers all non-bottle plastic packaging sourced from the domestic waste stream and includes rigid and flexible plastic items of various polymer types and colours that are typically found in the household waste bin. It excludes plastic bottles and non-packaging items. There is approximately 1 million tonnes of domestic mixed plastics packaging waste arising in the UK ...

  • Plastics waste management and resource recovery in India

    Exponential growth in plastic production and consumption has evoked concerns for its effective management. Within a decade, India has witnessed a substantial growth of 890% and 340% in plastic production and per capita consumption, respectively. Plastic recycling industries have mushroomed autonomously and accounts for 47% of annual recycling. Further, unscientific collection, transportation, ...


    By Inderscience Publishers

  • commercial plant to convert waste plastic to fuel

    RESEM products mainly include Waste tyre and waste rubber, plastic pyrolysis equipment; Crude oil, fuel oil, waste oil and lubricating oil Distilation equipment; Carbon black deep processing machine and tires crushing equipment. After purification, the oil quality will be improved. It can take place of diesel, and can be directly used in vehicles. And RESEM have exported more ...


  • How to build waste plastic pyrolysis plant

    Preparation of raw material: The raw material can be waste tire, tyre, plastic or scrap rubber. All if the above wastes can be processed by our machine. The following are details: Separate the ingredient which can not be refined from waste plastic, such as: soil, wood, stone, brick etc. If the raw materials are paper mill’s waste, separate the pulp. If there is water in raw material, should ...


  • Economical: Two-Stage Grinding of Valuable Plastic Waste

    Until now large cutting mills with high drive performances have been used for the single-stage crushing of large and heavy pipes, bulk plastic products etc. This leads to high investment volume, high sound emissions, frequent blade changes, high energy and personnel costs, among other things. On the other hand, two-stage crushing enables plastic processing companies to economically process ...


  • Recycling of plastic waste by density separation: Prospects for optimization

    A review of existing industrial processing and results of alternative processing investigations for separating solid mixtures and specifically recycling plastic waste by density separation is presented. Media density separation is shown to be fundamental for separation and/or pre-concentration in the recycling of plastics. The current use of static media processes limits the capacity and size of ...


    By SAGE Publications

  • New research may solve the problem of plastic wastes

    GLOBE-Net, May 8, 2013* - Plastic - it is an indispensable part of our everyday lives and an almost indestructible part of the garbage that daily ends up in our landfills, incinerators, junk yards, in our rivers or oceans, or in the bellies of fish or animals that form part of our food chain.  Every year, over 260 million tonnes of plastic are produced globally. That is ...


    By GLOBE Foundation

  • Chemical Recycling of Plastics Waste (PVC and other resins)

     Introduction For several years, debate has raged about the plastic PVC. Industry and environmentalists contend with each other virtually around the world. The environmentalists pursue a ban, industry aims to improve its environmental performance and believes that from an overall viewpoint there is no reason for such far-reaching measures against their material. In this context, the material ...


  • Waste plastic pyrolysis plant with high profits

    Pyrolysis Plant: Waste plastic pyrolysis plant, with the superiority of low capital investment and high fuel financial price, it has become the first preferred waste disposal method in many countries.This profitable project was established every week with low labor costs and high profits. Huayin renewable energy equipment company, established in 1993,have been a leader of oil pyrolysis ...


  • Waste plastic recycling plant with high technology

    Company Profile: Waste plastic pyrolysis plant, with the superiority of low capital investment and high fuel financial price, it has become the first preferred waste disposal method in many countries.This profitable project was established every week with low labor costs and high profits. Huayin renewable energy equipment company, established in 1993,have been a leader of oil pyrolysis ...


  • A strategic approach to plastics

    Plastic’s versatility renders it almost indispensable in today’s world, but plastic waste is a huge environmental burden. To make it possible to both benefit from plastics and reduce their environmental costs, the Plastic Disclosure Project, a global initiative of the Ocean Recovery Alliance, is ...


    By Ensia

  • In the Works: Magnetic Plastics

    (from Recycling Today Magazine) Harnessing the power of magnetic currents has long been an effective way to separate and recover scrap metals. Now, researchers are looking at ways to use this same power to improve scrap plastic sorting methods. Scrap plastic comes in the form of production or processing scrap and from post-consumer streams. Production scrap can often be components or ...

  • Financial Costs of Plastics Marking

     Abstract Recycling and reuse of plastic material can assist reducing the amounts of plastic waste to dispose of, and reducing resource use in plastic production. Mandatory marking of plastics presents a possible means for increasing the current rates of recycling and reuse. This study determines the financial costs for the EU plastic converter industry of using certain mandatory marking ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you